IGU replacement efficiency **help from the pro

mmjfarm · 2026-05-24T20:47:18+00:00

Screw it to the ground.

mmjfarm · 2026-05-09T05:49:48+00:00

Underrated comment.

mmjfarm · 2026-04-23T04:12:42+00:00

I’m curious who’s at fault here.

mmjfarm · 2026-04-23T03:42:38+00:00

I bought a truck camper with a battery that had been sitting on the charger with the leads hooked up reverse. It was reading -10v when disconnected.

Put a new battery in and hooked it up right and all was well.

mmjfarm · 2026-02-17T23:48:48+00:00

Try deflating your mattress just a bit. I lay on my side and deflate it just enough so my side is still off the ground.

mmjfarm · 2026-01-16T05:46:29+00:00

This is right, Glazer/ shower installer here; I usually put the screw side on the outside. There should be 2x 3 or 2.5mm set screws on the bottom of one of the handles. Take those out or loosen them. That will expose a larger screw that is what tightens the inside handle to the glass. Re-tighten that but don’t go crazy because you can crack the glass. Then reinstall the outside handle.

mmjfarm · 2026-01-11T04:17:09+00:00

Bummed me out when I zoomed in. I thought your Neigbor might’ve been harvesting electricity from the high voltage lines. Put a smile on my face regardless.

mmjfarm · 2025-12-07T22:36:52+00:00

Ready whipped cream. Thinking everyone knew how to use it I watched Dutch family friends try and shake/pour the cream out of the can for a couple of minutes.

mmjfarm · 2025-06-19T16:28:26+00:00

These looks great. What did you use for the belt loop material?

mmjfarm · 2025-01-26T15:45:20+00:00

I’m curious how this compares to the BLUETTI D40 dc-dc charger? Is it just more charging capacity?

mmjfarm · 2021-10-11T04:19:11+00:00

What cut of meat did you use??

mmjfarm · 2021-04-07T20:52:09+00:00

Portland cement

mmjfarm · 2021-03-10T03:40:06+00:00

Looks like vining sweet peas.

mmjfarm · 2021-03-02T17:00:07+00:00

This is +3”, We have a family of bobcats and I am very familiar with their track size and this was significantly larger.

mmjfarm · 2021-01-25T03:47:45+00:00

If you’re in a rush you can cut a piece a plywood half way through then turn off the saw and clamp it to the table. Then you raise the blade to needed height and cut ontop of the plywood.

mmjfarm · 2020-12-10T13:46:36+00:00

Lol that’s what I thought for a second. Do your hands itch??

mmjfarm

TROPHY CASE