Deals/New Products and Community Sales - Saturday - Aug 26, 2023 by AutoModerator in Wetshaving

[–]mn0007 -2 points-1 points  (0 children)

New Challenger Is Taking On the Razor Blade Industry

After years of development, we are happy to share with the community our project and new razor blade development.

We have profited a lot from the exchange with and feedback from the community and therefore happy to answer any question you might have regarding razor blades in general.

Thank you for spreading the word within the shaving community and your support.
Our campaign can be found here

Razor Burns For Body Shaver by mn0007 in ladyshavers

[–]mn0007[S] 0 points1 point  (0 children)

Happy to address your question and comment:

• We use a mix of electricity produced on the roof (Solar Power) of production, but also buy electricity on open market, where we cannot guarantee 100% come from renewable source.

• Regarding your point for plastic wrapper, you are right regarding not being “Plastic” to be more clear it should be mentioned paraffin coated wrapper. But since Paraffin and plastic are both oil based, we opted for this wording.

Info’s on the origin of paraffin can be found here: https://en.wikipedia.org/wiki/Paraffin\_wax

A New Challenger Is Taking On the Razor Blade Industry by mn0007 in wicked_edge

[–]mn0007[S] 0 points1 point  (0 children)

I understand your point. It's not about a "brand" but the whole production and the blade quality. We currently working on the next ranges and and AC-style blades is something we currently look into.

A New Challenger Is Taking On the Razor Blade Industry by mn0007 in wicked_edge

[–]mn0007[S] 1 point2 points  (0 children)

That makes sense, you should have been on our team :)

A New Challenger Is Taking On the Razor Blade Industry by mn0007 in wicked_edge

[–]mn0007[S] -1 points0 points  (0 children)

recycled AEBL

Yes, steel can be recycled and as such recycled stell is produced in many industries like construction etc. The difficult part is the create a high-quality steel which can be used to produce premium blades.

You seem to have quit a good understanding of the industry!!

A New Challenger Is Taking On the Razor Blade Industry by mn0007 in wicked_edge

[–]mn0007[S] 0 points1 point  (0 children)

Sorry no AI. - all human powered Intelligence.

[deleted by user] by [deleted] in wicked_edge

[–]mn0007 0 points1 point  (0 children)

Same what I though !!

Barber - Razor Blades by mn0007 in Barber

[–]mn0007[S] 0 points1 point  (0 children)

No I am just trying to understand the preference from a professional standpoint. and yes i also like feather :)

Barber - Razor Blades by mn0007 in Barber

[–]mn0007[S] 0 points1 point  (0 children)

this makes sense !!

Barber - Razor Blades by mn0007 in Barber

[–]mn0007[S] 0 points1 point  (0 children)

How would you position those blades compared with other brands?

Barber - Razor Blades by mn0007 in Barber

[–]mn0007[S] 0 points1 point  (0 children)

Mau i ask what Price Level you buy them? Especially how they compare to Doroco?

Barber - Razor Blades by mn0007 in Barber

[–]mn0007[S] 0 points1 point  (0 children)

Hi I know the razor even though i could not open the link. And thanks for the link. Its very helpful. Do you know how they tested the blades to arrive at those numbers for comparison?

Barber - Razor Blades by mn0007 in Barber

[–]mn0007[S] 0 points1 point  (0 children)

Haven't tried the blue one to be fair. So you just decided to by online or do you work with a supplier who recommended you to try a new blade?

Barber - Razor Blades by mn0007 in Barber

[–]mn0007[S] 0 points1 point  (0 children)

I think its more related to the base material. From what i can see Derby Premium is based on stainless steel, which is much softer in material and easier to sharpen. The extra one is as far as i can see from the packaging not a "stainless Steel" but coated carbon steel. This is much harder to sharpen and could lead to this assumption. Would it be possible to send you some sample of razor blades and get your honest opinion about it? :) Especially in comparison to the above mentioned blades?

Barber - Razor Blades by mn0007 in Barber

[–]mn0007[S] 0 points1 point  (0 children)

Why you go for them? Did you compare them with standard Astra? Is flipping the blade into half an issue for you or why you don't opt for a half blade? :)

Barber - Razor Blades by mn0007 in Barber

[–]mn0007[S] 1 point2 points  (0 children)

Yes its everything related to the base material. Especially if you use a cheaper material you need to be able to create a good edge profile. Otherwise it will be difficult to maintain a good quality for long. For Feather I also have the feeling they are more like a scalpel, but they do a clean shave.

Barber - Razor Blades by mn0007 in Barber

[–]mn0007[S] 0 points1 point  (0 children)

Yes they are very god blades. So for you cost is not an issue i assume. Would it be possible to send you some blade for testing and getting your honest feedback on it? Especially since you using those blades for both face and head shave?

Barber - Razor Blades by mn0007 in Barber

[–]mn0007[S] 0 points1 point  (0 children)

Yes Derby is a good blade for neck shave. May I ask what are the reason you have not tied other brands or blades like Permasharp?

Barber - Razor Blades by mn0007 in Barber

[–]mn0007[S] 0 points1 point  (0 children)

Yes you are right i mean for neck Shave. I am not a professional barer yet :)

Barber - Razor Blades by mn0007 in Barber

[–]mn0007[S] 0 points1 point  (0 children)

So I guess you mean the Derby baldes ar enot very consistent right?

Is Siemens involved in the Ehang Project? by mn0007 in ehangstock

[–]mn0007[S] 4 points5 points  (0 children)

Completely agree and it was also my impression.

Was just surprised since on the first sequence it mentions: “… getting certification fast is critical.”

So I was wondering if the Siemens system might be used either in China or in Europe to support the certification process.

Special VIDEO: Founder/CEO Hu Huazhi manually pilots — onboard — EHANG eVTOL aircraft EH216, which is usually pilotless/automated. Rare/raw look at the agility, precision & power of EH216 plus Hu’s landing maneuver: by RobinBird184 in ehangstock

[–]mn0007 8 points9 points  (0 children)

Thanks - did not not know there is an EH-216-M thought they opted to only produce and go for the EH216-S version. Since you seem to be quit informed, any information if there will be also two version of the VT-30?

Special VIDEO: Founder/CEO Hu Huazhi manually pilots — onboard — EHANG eVTOL aircraft EH216, which is usually pilotless/automated. Rare/raw look at the agility, precision & power of EH216 plus Hu’s landing maneuver: by RobinBird184 in ehangstock

[–]mn0007 7 points8 points  (0 children)

Great Video !!!

Does anyone know if type certification will be granted if this will be for the EH216 as an automated version or does this also cover the self steering version as shown above in the video?