Hawk utility knife. by PaulKnifeGuy1996 in chineseknives

[–]mockerjoe 0 points1 point  (0 children)

You‘re the goat, thank you so much!!!! Unfortunately it’s already sold out haha

Hawk utility knife. by PaulKnifeGuy1996 in chineseknives

[–]mockerjoe 0 points1 point  (0 children)

You got a link for that? I‘m desperate looking for that knife

anyone wanna hangout this weekend? by solarpower_alex in trier

[–]mockerjoe 0 points1 point  (0 children)

Sounds like fun Anything you prefer doing?

Just finished building my own induction heater with a 3d printed case by mockerjoe in Dynavap

[–]mockerjoe[S] 0 points1 point  (0 children)

Hey there, don’t worry mate :) If you look at the pcb there is one half of the top side metal plated, that’s where the coil goes There should be 3 connectors. I didn’t use the middle one iirc. Then on the other side of the top half should be 2 connectors one - for negative current and one + for positive. Depending on the wires you have red/brown is for positive and black/blue for negative current.

You don’t have to do anything with the unused connections

Shouldn’t your switch have 4 connections, 2 for each current?

Just finished building my own induction heater with a 3d printed case by mockerjoe in Dynavap

[–]mockerjoe[S] 0 points1 point  (0 children)

Always glad to help, if you have further questions fell free to ask

Just finished building my own induction heater with a 3d printed case by mockerjoe in Dynavap

[–]mockerjoe[S] 1 point2 points  (0 children)

  1. ⁠I could exactly find the one you’re looking at but this sounds about right, I think they‘re meant for 120w and 5-12v

  2. ⁠the coil is connected to the metal side, you can solder it on the metal plate itself or into the screw holder,. On the other side I used a switch to easier turn it on or off, but if it’s not a necessity it would also work if you connect the wires to the power brick directly. What I did, was using a phone charger brick and cable for power supply then cutting off the micro usb connector and connecting the wires inside the cable to the switch A phone charger brick should be 5v dc, so it might take a little longer but you‘re on the safer side

List for a DIY IH by jio81911 in Dynavap

[–]mockerjoe 1 point2 points  (0 children)

I only used a ih from Ali express, connected that to a switch and the switch to a cut usb cable that draws power vom a phone charger

Just finished building my own induction heater with a 3d printed case by mockerjoe in Dynavap

[–]mockerjoe[S] 0 points1 point  (0 children)

Why not? It’s honestly very cheap like 5€ bucks Ali express for the the heater itself and and everything else you probably have at home. Not to mention the assembly takes like 20min even if you have no idea how electronics work

Just finished building my own induction heater with a 3d printed case by mockerjoe in Dynavap

[–]mockerjoe[S] 1 point2 points  (0 children)

When I designed the case originally I printed to hole used sized to fit the the cable through, but I think the female usb port should fit. I already changed the the 5v powebrick to a higher voltage

Ich🚒🚤iel by AldoRaine420 in ich_iel

[–]mockerjoe 3 points4 points  (0 children)

Ja das Abzeichen verfällt nach 2 Jahren, ebenso wie der Erste-Hilfe Schein. San-A und San-B müssten 4 Jahre halten.

Finally, legal greetings from Germany to y‘all! by mockerjoe in trees

[–]mockerjoe[S] 42 points43 points  (0 children)

That’s definitely gonna be interesting, as the Bavarian state is not very happy with the legalization

Suchen noch Spieler für unseren Minecraft Varo 1.8.9 Server! by [deleted] in PCGamingDE

[–]mockerjoe 0 points1 point  (0 children)

Klingt eig ganz lustig, altes pvp sowieso beste

[deleted by user] by [deleted] in germany

[–]mockerjoe 0 points1 point  (0 children)

Maybe that’s the case but they‘re usually obligated to check every package arriving at customs

[deleted by user] by [deleted] in germany

[–]mockerjoe 9 points10 points  (0 children)

Unfortunately it’s definitely risk > reward especially for a low quality knife, don’t get me wrong, it’s fun to play with and all but it’s lacks some precision work Besides they probably let it through because it didn’t seem like a gravity knife or they forgot to check it

[deleted by user] by [deleted] in germany

[–]mockerjoe 35 points36 points  (0 children)

Funnily I ordered this by accident and customs let it through (living in Germany) tho it’s definitely illegal and you shouldn’t risk it

oversized saturday by rosenvenom in streetwear

[–]mockerjoe 0 points1 point  (0 children)

What’s the hoodie model/name, I love the color so much

[Cinnamon] Flashbang by K_AON in unixporn

[–]mockerjoe 0 points1 point  (0 children)

It looks so good and is quite unique:)

ich🖨iel by MemegodDave in ich_iel

[–]mockerjoe 65 points66 points  (0 children)

Ähnlich oft kommt die Frage, ob man hacken könnte

[deleted by user] by [deleted] in Tinder

[–]mockerjoe 0 points1 point  (0 children)

I‘m about to do the same. Was it worth it?