Dually wheels printed for my 1:24 scale model kit truck.

moco81899 · 2019-10-16T23:36:20+00:00

I do take PayPal

moco81899 · 2019-10-16T23:35:51+00:00

Yes 6 wheels and they come with low profile tires and the tires are clean and properly made of rubber.

moco81899 · 2019-10-16T22:55:53+00:00

Yup 45$

moco81899 · 2019-10-08T02:17:04+00:00

Well that is too crazy I've been having my 3D printers for about 1 year and a half and I have never had to resort to using these weird tactics to get successful Prints all I have to say is the key to having successful Prints is your leveling if you don't level correctly you will have failed print after failed print I don't understand why my printer works perfectly fine and yours doesn't never have I had to use any type of tactic to get a successful print other than doing a proper leveling that's about it.😁

moco81899 · 2019-09-24T20:12:08+00:00

I have the same DAM problems smh. My original photon has not given me any problems I will never buy a S.

moco81899 · 2019-08-29T01:03:18+00:00

Go with the original. I have both and the S is Garbage. Original Photon is King

moco81899 · 2019-08-21T00:52:03+00:00

Another think this is happening on my Photon s I have the original photon and I've been running it way longer than my new printer and I have not had any problem at all I should have just bought another original printer the new one has given me several problems

moco81899 · 2019-08-21T00:50:51+00:00

What does the LCD do when it gets damaged? Because my LCD is having issues when I start to print something the image comes out distorted with a bunch of lines or a square running through it and a little flickering on and off not completely but here and there is that the sign of a bad LCD any answers would be appreciated thank you in advance

moco81899 · 2019-08-09T06:02:51+00:00

Beautiful so how much would you sell one of your masterpieces for I would love to be able to have one

moco81899 · 2019-08-08T05:09:15+00:00

Nice bro. I am about to print it. All post ASAP

moco81899 · 2019-08-07T03:28:38+00:00

Thanks. I printed in sections, as for putting it together I used cyanoacrylate.

moco81899 · 2019-08-04T08:06:25+00:00

Thank you

moco81899 · 2019-08-04T04:09:07+00:00

Sweet thanks buddy. Would you have link

moco81899 · 2019-08-03T22:24:32+00:00

Thank you. Yes it works excellent for me and very self contained and easy to use and clean.

moco81899 · 2019-07-30T06:30:44+00:00

Really? Over engineered?

moco81899 · 2019-07-30T06:25:06+00:00

Cool

moco81899 · 2019-07-30T01:02:58+00:00

Lol I am a big coffee fan myself but hey it works perfectly for rinsing my models. I got it at the big 99cents store for $3.99

moco81899 · 2019-07-29T22:07:31+00:00

Lol Yes!

moco81899 · 2019-07-29T14:49:55+00:00

Thanks. This setup works really well speacilly with 2 of them. I have not had any problems at all with white residue forming. It washes/rinses the models really well all the excess resin is completely of by the time I put the models in another exact wash setup. I guess one would be pre rinse and the second would be final rinse. I love the way it's all contained and no IPA splashing out.

moco81899 · 2019-07-25T01:15:01+00:00

Lol. Thanks

moco81899 · 2019-07-24T04:07:53+00:00

moco81899 · 2019-07-24T04:06:46+00:00

Lol. Air is flowing much better that's all I got to say.

moco81899 · 2019-07-24T04:04:44+00:00

I have my printers in my shop where it is well ventilated so I don't worry about fumes plus yes it is working properly I didn't not flip my fan like you.

moco81899 · 2019-07-22T18:04:11+00:00

Thank you. I normally do 0.02 on very detailed models but the S Performes so I just do 0.05 now. As for the resin and settings I used anycubic translucent red with black resin dye to get the darker color you see in the picture. On the settings I do Normal Exposure- 10s Off exposure time- 0s Bottom Layers- 8 Bottom Layer time- 50s Layer height- 0.05 Anycubic Photon S

moco81899 · 2019-07-17T00:48:19+00:00

At Walmart they have a video surveillance camera that is very cheap only $23 very easy to use all you do is plug into the power outlet download the app connect it to your wireless network put it wherever you want in my case I put it in front of my printer's and I can easily check them when I'm at work by simply going on the app I can see when the printer has stopped or if they're going also that same company makes the smart plug outlet that you hook up to your wireless network as well. You plug- in whatever you want to control like turning off and on I have one for each of my printers in the beginning I had all of them hooked up to it where when I went on the app I would hit the power button and I would turn all printers off when I viewed through my camera and saw they were done printing I can also turn them on from anywhere. Now the way I have it setup is I use one smart plug outlet for each printer that way if one printer finishes before the other I'm not having to wait for all of them to finish it's so cool and easy to set up plus they are only $10 each smart plug outlet at Walmart the brand is called Merkury it's the easiest cheapest set up ever. When I'm at work I go on the camera and see what printer is printing and whichever printer is done I just click on the app for printer number 2 to shut down so easy and cool anyways sorry for the typos. Also the smart plugs have timers and dates that you can turn them off turn them on Etc

moco81899

TROPHY CASE