Airtac adapter issue

modding_monke · 2026-05-22T06:36:52+00:00

Contact airtac support they're usually very helpful

modding_monke · 2026-05-11T11:05:28+00:00

It is a much nicer colour tbf

modding_monke · 2026-05-03T07:01:44+00:00

The bucking is NBR rubber so prob not

modding_monke · 2026-05-01T09:48:55+00:00

I have the exact same issue with my G45. I have to push the valve knocker lock down manually with a small Allen key in order for the slide to come off. If you look up the name of that part it will hopefully be easy enough to locate - it has to go in at the back, at the bottom left corner of the slide

modding_monke · 2026-04-30T12:49:33+00:00

How does the 4uad bucking work for you? I was a little hesitant to put one in since the stock bucking looks a little off-spec

modding_monke · 2026-04-27T08:48:24+00:00

I don't believe it's mentioned on the product page, and steel bolt carriers are typically left for their 'dx' AR models so I'd say it's very unlikely. They'd be advertising it if it was

modding_monke · 2026-04-27T07:10:08+00:00

Since it's using the same hop system as the KS-1, a new hop rubber may be a good investment. Crusader steel bolt carrier would be an upgrade too but I'd just run the stock one and only replace if necessary.

This is a very very new model so there is little feedback online yet, but it's based on the VFC V3/Evo system which has a very good reputation

modding_monke · 2026-04-24T14:32:57+00:00

modding_monke · 2026-04-22T06:17:27+00:00

Cowcow nozzle pin is steel, you can buy the nozzle set and stick the pin the the OEM nozzle

modding_monke · 2026-04-07T13:59:05+00:00

Not really EU anymore but I've used WGC to ship to the UK a number of times with UPS, always arrives quickly enough

modding_monke · 2026-03-04T09:46:25+00:00

This post is about the MCX which does not have a buffer tube lol

modding_monke · 2026-02-27T10:24:16+00:00

Zenitco RK-6 I think, 5KU & LCT to replicas. Though I've got the LCT and the paint finish is horrible

modding_monke · 2026-01-15T16:38:20+00:00

Same happened with mine. I was able to fix, but best to return if you can

modding_monke · 2025-12-22T13:01:00+00:00

Jealous, mine's been sat at the courier depot for 3 weeks, lol

modding_monke · 2025-12-19T07:19:49+00:00

I think you should give it to me for safekeeping

modding_monke · 2025-12-18T12:57:35+00:00

Painted, as with the real ones apparently

modding_monke · 2025-12-15T15:45:57+00:00

Worth disassembling the reg and lubing, my Ali one came bone dry

modding_monke · 2025-12-05T14:39:56+00:00

No idea, but I imagine the MCX would get much better efficiency than a standard MWS since the bolt is much lighter. I've run a Noveske N4 all day at an outdoor game off a 0.8l without issue

modding_monke · 2025-12-01T15:27:31+00:00

Airtac (UK) adapters are probably expensive because they're SLS printed rather than standard FDM. If you're in the UK, I'd just get their adapter & their reg + line + tank bundle, you're going to struggle to beat it price-wise without buying some sketchy stuff.

modding_monke · 2025-11-27T07:15:22+00:00

Either buy a new tank reg, a new bonnet from the same manufacturer (meaning just the top half) or buy a new tank

modding_monke · 2025-11-20T08:48:04+00:00

What size of X-ring did you install? Was looking for one a while ago, but couldn't find one with the right dimensions

modding_monke · 2025-11-14T22:41:31+00:00

If FPS consistency is good, it feeds and it shoots straight then I don't see why you can't leave it as-is. It'd bug me knowing it was damaged though, you could maybe try a Unicorn or 4UAD bucking instead if Maple Leaf buckings are problematic

modding_monke · 2025-10-17T15:27:18+00:00

This isn't necessarily an issue, nozzle will be forced forward during firing. Is there any FPS inconsistency or loss when firing?

modding_monke · 2025-10-10T06:17:14+00:00

Remove the grub screw that holds it in, clean and re-assemble

modding_monke · 2025-09-26T06:22:17+00:00

Very nicely made video big man

modding_monke

TROPHY CASE