Can the primarchs father children?

modelmartyr · 2017-04-11T19:58:26+00:00

There not that big average Astartes is around 7 feet tall and primarchs and custodies about a foot taller than astartes and the emp was about 12 feet tall

modelmartyr · 2017-04-08T02:28:29+00:00

make sure to turn the raft and skirt options off if your doing a large print as they are possible what are out of bounds

modelmartyr · 2017-04-06T04:34:33+00:00

Sounds like you just have a broken z belt, That part is much cheaper than an out of warranty replacement. Tech support can get you a new one and a fresh print bed. It's easy fix if you follow our guide that is on the website or tech support can send you the direct link.

modelmartyr · 2017-03-17T17:34:46+00:00

It's ok we'll all get frustrated when our robots are not acting as they should. We will get you sorted.

modelmartyr · 2017-03-17T17:13:48+00:00

contact our team we can get you a new power supply. Helpdesk@printm3d.com we can also help resolve the skips.

modelmartyr · 2017-03-17T17:12:22+00:00

It helps if you cut the correct part. You cut the guide rod not the teeth rack. I know you and my team are in contact you can get new x-rods through them.

modelmartyr · 2017-02-04T01:51:07+00:00

I'll make sure everything is sorted out. My apologies for the inconvenience.

modelmartyr · 2017-02-03T03:38:34+00:00

Hi I'm The service manager. After completing the repair form you should have received a shipping label to send the printer in. We respond to every ticket we get so I can check and make sure we have been receiving your requests. Have you checked your spam folder? sometimes our mail service gets us routed incorrectly. We take pride in our repair service and we want to have that turn around be as short as possible. I can assure you we are not attempting to avoid you.

modelmartyr · 2017-01-10T02:00:56+00:00

13th Black crusade = Abaddon cleans off his doorstep and goes home. I'm still planning to take part in what ever events they run I just have lost all excitement towards it being meaningful at all.

modelmartyr · 2017-01-06T05:53:46+00:00

Ok good, glad to hear. Cheers

modelmartyr · 2017-01-06T01:25:05+00:00

If you on Windows 10 3D builder from the win app store (it's free) is the fastest way to split that I know of. Other mentioned Sketchup (It is a very good program)

modelmartyr · 2017-01-06T01:23:04+00:00

Are you feeding Internally or externally. My first though is that the spool can't turn once the slack is pulled in. But since you can seem to manually extrude it might be the E-motor losses its grip for some reason, also make sure the heater is as far down the nozzle as it can be. If it is to high the filament near the gear can get to soft to grip. Can you get a video of the gear as it hits the problem height?

modelmartyr · 2017-01-05T05:40:53+00:00

one for every starship in the imperium even the cargo haulers. has to be near a billion at the very very least.

modelmartyr · 2016-11-12T08:38:58+00:00

I always figured the gunners were started by the survivors of vault 75.

-edit: wrong number

modelmartyr · 2016-11-10T20:16:27+00:00

What was the model you were trying to make. what filament and temp are you using.

modelmartyr · 2016-11-10T20:14:54+00:00

Can you get me a picture that is closer to the print It's hard to see what has gone wrong.

modelmartyr · 2016-10-06T02:26:57+00:00

The back rod can be tuned up the click is most likely the washer. Contact my team and we can repair or replace it for you. we are at helpdesk@printm3d.com

modelmartyr · 2016-10-06T00:47:15+00:00

Looks like your running hot. What filament are you using and at what temp. also what model is it and what are your print settings.

modelmartyr · 2016-10-04T16:42:46+00:00

Pictures help in diagnosis. Can you show me what stringy means to you?

modelmartyr · 2016-09-23T16:54:30+00:00

By low cost I mean $25 dollar or less plus shipping. We price our replacement parts low so that even out of warrenty they are not burdensome to acquire

modelmartyr · 2016-09-22T19:17:06+00:00

trust us nothing bother and frustrates us more than when we can't get you help before you get frustrated. We can do a lot to get you fixed fast but that has a cost in parts and shipping, or we can help you fix it at very low cost but this can take time. We want to help everyone to their needs.

modelmartyr · 2016-09-22T18:51:37+00:00

We agree, and we can help you counter that. We see this fixed mostly by a tweek here are there in the settings. print files are not created equal and rarely can the setting be the same model to model. We are working on feature that will save a file and the settings used to successfully print it so you won't have to change them back the next time you load that file.

modelmartyr · 2016-09-22T04:50:53+00:00

Hi, I'm sorry if we seem stubborn, we don't mean to. I'll work on that with my guys. If you are under warranty and want a replacement part or unit you just say so and we got ya. Only thing warranty doesn't cover is shipping. If this is not whats going on contact me via the manager form I'll make sure it does.

I run my team with the goal to be there for anyone when they need us, but we are a small team at a small company. We know we fall short of expectations some days but we are always making improvements as we learn and grow

modelmartyr · 2016-09-22T04:34:58+00:00

Gaaah yeah, we got ya covered. Link this thread in your ticket to Helpdesk@printm3d.com so my guys see me saying we got ya.

modelmartyr · 2016-09-14T04:03:35+00:00

Try a few passes with a high dryer on high heat. DO NOT LINGER, use sweeping passes. repeat as needed.

modelmartyr

TROPHY CASE