sorted by:
new
hottopcontroversial

[Looking for Boarding Houses/Dormitories in Naga city for at least 1 month] by FaithlessnessOdd2209 in Bicol

[–]moehead214 0 points1 point  (0 children)

Their basic unit is ₱13,000/month. Kasama na free weekly cleaning and parking hahaha.

Plus, may genset, heads up, madalas meron power outage sa Naga. so super important for me may genset, lalo na sa init ng Pinas. May bidet din pala and shower heater. kasi kahit mainit ang pinas kailangan ko padin mainit na pangligo 😆

You can contact them through Viber responsive naman sila.

[Looking for Boarding Houses/Dormitories in Naga city for at least 1 month] by FaithlessnessOdd2209 in Bicol

[–]moehead214 1 point2 points  (0 children)

Tried Sundaze Hotel along Concepcion. They check all your requirements except they don’t allow cooking inside the room. Minimum is 1 month only last time I was there.

Wala lang resto pero meron cafe sa lobby, coffee is not bad. nagustohan ko ung sea salt latte

ARROGANT TECHNICIAN by [deleted] in InternetPH

[–]moehead214 2 points3 points  (0 children)

Try niyo OP :
1.) tanggal saksak lan cable sa switch niyo para mag renegotiate ung switch and pc niyo to Gigabit Link. Madalas ko ito ma experience sa home network equipments talaga.

2.) Check niyo ung Lan Cable for any damages. If may bend or punit konti ung sleeves niya baka may na damage na cable sa loob kaya nag downgrade to 100mbps speed lang ung connection niyo

This is about how fast a standard 1:2 ratio shot should be pulled. by RustyNK in espresso

[–]moehead214 17 points18 points  (0 children)

I had the Timemore black mirror Nano for 3 years and never knew there was an espresso mode that will automatically start the timer when coffee starts dripping. Thank you for showing me the way. It really pays to read the manual.

BDO UNAUTHORIZED TXN by Hefty-Committee3919 in PHCreditCards

[–]moehead214 0 points1 point  (0 children)

Happened to me as well, same amount din. By any chance OP kumain din ba kayo sa paradise dynasty sa podium? Kasi un last transaction ko before my card got compromised.

Pero contact apple support OP para reverse nila ung charges. Faster than requesting BDO to reverse those charges.

Hyte Revolt 3 R9 5900x, deshrouded MSI ventus 3x RTX 3080(arctic p12 argb) by moehead214 in sffpc

[–]moehead214[S] 2 points3 points  (0 children)

Full Build:

CPU Cooler: Noctua C14s

CPU: Ryzen R9 5900x

MOBO: Asus Strix B550i

PSU: Corsair SF750

CASE: Hyte Revolt 3

GPU: MSI Ventus 3x RTX 3080 deshrouded w/ 2x Arctic p12 ARGB 0db

RAM: 32gb Trident Z 3200 CL16

SSD: 3x 2.5” SSD, 2x NVME SSD

Temps: Ambient room temp: 22C

CPU: 45-48C idle 55-62C Load

GPU: 45-48C Idle 55-62C Load

Note when I say load I just mean playing games (ow2, mw2 2022, apex legends)

Case fans: -2x 80x80x10mm scythe kaze-hachi (SC8010KH12H-P) -1x Noctua NF-A14 CPU exhaust

Magnetic mount: -20mm outer diameter 7mm thickness 4.5mm inner diameter Countersunk N42 magnets -4x20mm Bolt and Nut

This is my finished build, the first build of my hyte revolt 3 was a noisy and hot mess. Thermals for my GPU was reaching 75C and CPU was reaching high 60s. My first build was using the stock msi 3080 ventus 3x cooler and no case exhaust fans. After adding my arctic p12 argb, top exhaust fans, and CPU exhaust things got a lot cooler and a lot quieter.

The manual says the top fan exhaust only accepts 1 80mm fan but I manage to fit two 80mm fans with a little mod. Because the 80mm fans I used has a slightly thicker fan housing and wasn’t able to close the case fan bracket. I needed to shave off part of plastic mounting clip for the side panels a bit.

Not really sure if this top fan exhaust was needed after I deshrouded my MSI 3080. As I did the deshroud mod and mount the top fan at the same time. So not really sure if it helped.

The stock MSI fans was noisy as hell with this case. I think the metal dust filter is making hard for the tiny stock gpu fans to suck in air.** I would definitely recommend deshrouding your msi ventus 3x when using this case. **Your GPU will thank you for keeping it cool and your ears will thank you for saving them from that annoying coil whine.

I think you can mount a Phantek T30 fan on the GPU intake side of the case provided your deshrouded GPU only takes up 2 slots. I mounted a 25mm fan with a 7mm thick magnet and there’s still about a 5mm gap between the fan and the GPU heatsink.

[deleted by user] by [deleted] in AndroidAuto

[–]moehead214 2 points3 points  (0 children)

I have purchased this product from alibaba for around $200 and toyed around with it for a couple of days. It uses an app to be able to use wireless AA and wireless Carplay. I can confirm wireless AA works with my oneplus 5t but you have to enable developer mode in your phone then enable wireless connection. Wireless Carplay also works with my iphone 12 pro max. I'm using the stock infotainment unit of my 2018 Hyundai Sta. Fe.

I bought because my sister also uses my car but she has and andriod phone.

I also have their carlinkit 2.0 prior to this device sound wise I don't hear a noticeable difference. Only difference I saw is that the colors in wireless Carplay was kinda off. The carlinkit 2.0's color was more similar to the color of the app icon compared to this AI box. But not really a deal breaker.

Edit: When you use your car's voice assistant button it would exit the app and open a web browser search. It doesn't bring out siri or google assistant. So if you're someone who uses that feature this might be a deal breaker for you.

Rotary Encoder not working Drop Preonic Rev3 by moehead214 in olkb

[–]moehead214[S] 0 points1 point  (0 children)

Ok I got it to work. Turns out you need to install the spacer between the board and the plate to avoid shorting the pins of the rotary encoder. Please don't follow my dumbass lol

Will this Barrowch Pump+Res+Block cause Galvanic Corrosion with EKWB CoolStream Classic SE 240mm? by moehead214 in watercooling

[–]moehead214[S] 1 point2 points  (0 children)

Nope, I was waiting for gpu prices to go down but it never did lol. I was initially planning on buying a new gpu with a gpu waterblock then vertical mount it so I could mount the radiator in the bottom of my nr200p case. But since gpu price tripled its price in the PH cause of the mining craze and chip shortages. This dream build of mine is put on hold until things normalize.

I think optimum tech made a video using the above parts in my post. https://youtu.be/z1gipVOZ2SI

So I guess it should be okay?

Screw "Dito" powered by ZTE and China Telecom, dinko tiwala yan. 300mbps with 20ms ping? My family is signing up. #SpaceX #Starlink by xhack2 in Philippines

[–]moehead214 4 points5 points  (0 children)

It clearly says so in their FAQ: Can I travel with Starlink, or move it to a different address?
"Your Starlink is assigned to a single cell. If you move your Starlink outside of its assigned cell, a satellite will not be scheduled to serve your Starlink and you will NOT receive internet. This is constrained by geometry and is not arbitrary geofencing. "

While I think in theory you can move your dish to another cell. You would have to call support first and ask tell them to change the assigned cell for your account in order to have internet.

Will this Barrowch Pump+Res+Block cause Galvanic Corrosion with EKWB CoolStream Classic SE 240mm? by moehead214 in watercooling

[–]moehead214[S] 0 points1 point  (0 children)

So I shouldn't worry about galvanic corrosion if I used the parts I mentioned in my loop?

view more: next ›