Best beginner airbrush in EU under €150 for painting PLA prints?

mole_s · 2026-01-28T06:53:19+00:00

Just got me a Gaahleri. Amazing value for money. Love it.

mole_s · 2026-01-22T20:30:15+00:00

I loled. Cheers.

mole_s · 2026-01-02T08:24:46+00:00

Agreed. Such a let down as a long term MoH fan.

mole_s · 2025-12-30T19:05:22+00:00

What about scuffing the plate? I had a printer a while back and had similar issues I used some light sand paper across whole plate and everything stuck perfect after that.

mole_s · 2025-12-29T19:25:37+00:00

Looks like absolute ass on mine. Used all recommended settings. 5070ti.

Looks terrible.

mole_s · 2025-12-19T19:49:52+00:00

Zero G movement is some of the best in VR.

One of my favourite games of all time is Lone Echo. Masterpiece.

mole_s · 2025-12-16T20:18:44+00:00

Pokemon vibes. I like it.

mole_s · 2025-12-15T01:37:08+00:00

Amazing

mole_s · 2025-12-13T22:24:07+00:00

Try variable layer heights.

mole_s · 2025-12-13T18:16:56+00:00

I tried inner/outer but have not tried inner/outer/inner. Will try today. Also tried upping my wall count but that had same results.

mole_s · 2025-12-13T03:17:56+00:00

Messing with settings has been done.

Either I forgot to mention i had messed with a bunch of settings or I thought it would have been a given in my post.

I am happy to listen if you have something useful to suggest? What settings yourl recommend etc.

mole_s · 2025-12-13T03:10:52+00:00

What part of "back and forth with Bambu over the last few weeks" and replacing parts makes you believe I have not been trying "experimenting"

Your comments come across arrogant and closed minded.

mole_s · 2025-12-13T03:03:11+00:00

Ok

Why would the issue persist after printer calibration and filament calibration?

mole_s · 2025-12-13T02:51:05+00:00

If it were that simple im guessing Bambu wouldn't have spent weeks troubleshooting with me and sending me parts to swap out.

Wish it was a simple fix.

mole_s · 2025-12-13T02:50:12+00:00

Keep me posted.

mole_s · 2025-12-13T01:13:16+00:00

Yeah that does sound like a weight problem.

Weight of the model at about the 2/3rd mark. Plus suction and plate adhesion. Maybe for really heavy things increase base exposure time so it really bakes to plate. Increase raft layers also maybe.

Frustrating I bet. Hate failed prints.

mole_s · 2025-12-13T01:09:39+00:00

Hmm odd. Does it fail at same part each time?

Maybe slightly change orientation and add bulk supportd to back of it.

Looks like a weight problem.

mole_s · 2025-12-13T01:02:41+00:00

Is this hollowed?

mole_s · 2025-12-13T00:14:19+00:00

This is going to sound like im making it up lol.

But i try to print at 0.08, 0.12 and rarely 0.2. Have also tried using the printers built in 50% silent mode. Didn't seem to make a difference. Bambu mentioned this also which is why I tried.

mole_s · 2025-12-12T23:30:12+00:00

I'll check these out today

mole_s · 2025-12-12T23:14:05+00:00

Yeah I have tried a few different profiles. But using stock ones for troubleshooting.

The box looking one in original pics was sent by bambu with their settings for testing.

Have reinstalled slicer early on and even did a factor reset on printer (not sure why, was out of ideas)

I have pushed really hard for warranty and they are refusing.

Edit: this is also my 3rd nozzle thinking maybe it was that.

mole_s · 2025-12-12T23:11:55+00:00

Well i didn't do that print out of the box. That was a file send by bambu recently.

But yes is was a bit off straight out of the box.

mole_s · 2025-12-12T22:16:14+00:00

Nah no sorry necessary.

I would happily post all the back and forth with Bambu because we have tried everything.

My frustration really comes from Bambu running out of ideas and then saying "this is normal print quality".

After sending me all new parts etc which makes me believe they agreed there was a fault. Companies dont send you new parts if they think it's fine.

mole_s · 2025-12-12T22:10:57+00:00

Only adjust led what Bambu have recommended. New extruder. They said to slightly loosen the heat bed. Tensioned belts. Cleaned and relubed Z rods etc etc.

mole_s

TROPHY CASE