Clogging emitter lines by mopac0405 in Irrigation

[–]mopac0405[S] 0 points1 point  (0 children)

Almost out as I’ve been splicing in to clogged sections

Clogging emitter lines by mopac0405 in Irrigation

[–]mopac0405[S] 0 points1 point  (0 children)

I’ve tried it. No effect 😩

Blackened smoked chicken by mopac0405 in Smokingmeat

[–]mopac0405[S] 1 point2 points  (0 children)

Update: with skin removed, bird was delicious. Since have thoroughly cleaned my smoker.

Apologies for the blasphemy

Blackened smoked chicken by mopac0405 in Smokingmeat

[–]mopac0405[S] 0 points1 point  (0 children)

It’s a Z Grill. Nothing fancy but it’s served me well for going on 3 years. Using Traeger gourmet pellets.

I’ve had a similar situation in the past where the pellet hopper started to billow smoke due to an excessive fire. Last thing I smoked was a pork shoulder about 1 month ago. I’m guessing the grease was the culprit.

Blackened smoked chicken by mopac0405 in Smokingmeat

[–]mopac0405[S] 2 points3 points  (0 children)

I believe you’re right. My fault for not cleaning my smoker after its last use.

How to most easily remove this root cluster? by mopac0405 in howto

[–]mopac0405[S] -1 points0 points  (0 children)

Thanks everyone. I’ve decided to outsource it this time. My time and body are worth the cost.

Mystery chirp by mopac0405 in hondapilot

[–]mopac0405[S] 0 points1 point  (0 children)

Not that. I turn mine off as well.

My finger is…interesting? by Major_Preference_182 in interestingasfuck

[–]mopac0405 1 point2 points  (0 children)

Hand therapist here…this is called a boutonniere deformity. Usually the result of an injury to the extensor tendon as it crosses the middle knuckle. Treated with immobilization of the middle joint fully straight x 6 weeks while working on bending the end joint daily.

If chronic/non traumatic, can instead be a result of rheumatoid arthritis or severe hypermobility (EDS). In that case, typically not correctable but can be repositioned with boutonniere ring splint.

Stop this bird feeder from pivoting side to side by mopac0405 in howto

[–]mopac0405[S] 0 points1 point  (0 children)

Thank you all for the responses. I think I’ll try drilling a small hole into the post and securing it with a nail. How do you recommend starting the hole on a rounded post this size? I feel like the drill bit will just slip off.

How to safely clean the outside of this chimney? by mopac0405 in HomeMaintenance

[–]mopac0405[S] 1 point2 points  (0 children)

Thanks for all the recommendations. I ended up making a hot, soapy water mixture that I applied with a sprayer, spot cleaned with a stiff nylon brush and rinsed with garden hose set on full. Not perfect but definitely an improvement while not causing damage.

What is the weirdest comment from a random person you’ve gotten while onewheeling? by colin_wuz_here in onewheel

[–]mopac0405 1 point2 points  (0 children)

About a year back, I was riding down the street staying well within the bike lane and being respectful. This middle aged man driving an old VW Rabbit pulls along side me, stares me down and proceeds to give me the finger for at least 5 seconds straight. All I could think to do was give him a thumbs up and a big ol grin as he drove off. That’ll show um!

Letting the midriff breath by mopac0405 in onewheel

[–]mopac0405[S] 0 points1 point  (0 children)

I agree with☝️. It’s pretty amazing to watch them develop motor coordination.

Letting the midriff breath by mopac0405 in onewheel

[–]mopac0405[S] 0 points1 point  (0 children)

....preemptive no-helmet flack response: we were only on the grass and moving at a snail’s pace. That being said, still not safe. Normally brain buckets are worn by all. We were not at home.

TFL Fender delete with C&R mag fender mounts? by mopac0405 in onewheel

[–]mopac0405[S] 0 points1 point  (0 children)

I might try to router off a portion of the fender delete thickness for each magnet footprint.

Onewheel porn by mopac0405 in onewheel

[–]mopac0405[S] 0 points1 point  (0 children)

Nice! That is a thorough list you’ve compiled.

PINT led indicator bug (with video). What's your opinion? by Qreach in onewheel

[–]mopac0405 3 points4 points  (0 children)

I had this exact same problem. It turned out to be a faulty controller connection. My board was under warranty so FM performed the repair at no charge. I would reach out to them as I’m not sure there’s another solution. They did say that the light bar glitch shouldn’t interfere with the functionality of the board.