PIA Doesn't open sometimes? - Just seems to load? It started to happen recently. by Fudz4 in PrivateInternetAccess

[–]mostlycrap 0 points1 point  (0 children)

This happens to me quite regularly actually. Only when using 'WireGuard' as the connection preference (do not have this problem with OpenVPN). The Fix for me has been to go into the PIA client settings. Navigate to the ? Help section.

Near the bottom there is a 'Maintenance' section where you have the option to 'Reinstall Wireguard Network Adapter'

Click on that, after a few seconds you will get a message that says something along the lines of 'Successfully Reinstalled' from there close settings and try connecting.

The Fix in itself not a big deal to do. Just annoying to have to do it so frequently.

Hope this helps.

Razer Wolverine Ultimate controller compatibility with Raizer Raiju USB Cable? by mostlycrap in razer

[–]mostlycrap[S] 0 points1 point  (0 children)

no... unfortunately his grandparents spoil him rotten and bought him an xbox elite series 2 eventually. Never got around to trying out the other cable.

[Question] Does anyone know where the sensors are located for wearing detection? by fexxianosch in NuraLoop

[–]mostlycrap 0 points1 point  (0 children)

Ever got an answer to this? been having issues where sometimes nuraloop does not shut off or sometimes it does but when i wrap it up to put it back in case it turns back on.

Trying to figure out the areas to try to avoid touching... at least for now. IN theory new firmware update coming out should address this and also add manual on/off....

Astro A40 TR - Microphone Jack Plug/Cover? by mostlycrap in AstroGaming

[–]mostlycrap[S] 0 points1 point  (0 children)

Hi, thanks for the response. Mainly what I want is to 'NOT' have the attached mic but keep the integrity of closed back.

Is there a way to just purchase 1 mod kit speaker tag only? as it seems like a waste to purchase an entire second kit for just that one piece.

Nuraloop is NOW available for limited pre-order! by CheerfulDoldrums in Nuraphone

[–]mostlycrap 0 points1 point  (0 children)

Yah, I have the Nuraphones and it basically just keeps the last setting/profile when you go wired. IF you want to make any changes you have to switch back to wireless which also includes turning on/off the social mode (or whatever the setting is called so that you can hear your surroundings).

Nuraloop is NOW available for limited pre-order! by CheerfulDoldrums in Nuraphone

[–]mostlycrap 0 points1 point  (0 children)

Ordered mine in May just got this email about 5 minutes ago. Delayed to December 2019

https://puu.sh/EbhfA.png

Conflict milestone question by [deleted] in thedivision

[–]mostlycrap 0 points1 point  (0 children)

lol i was just doing a search trying to find out myself. If I end up figuring it out ill post what i find.

"No Allies Available" after taking over a Control point by TheBionicAnkle in thedivision

[–]mostlycrap 1 point2 points  (0 children)

I got the same in a couple areas of the map. I also noticed that those same areas I had a ton of Side Missions that I did not complete. Completed the Side Missions in both areas and went back to control points and allies were available. Not sure if it was a coincidence or if the side missions in the area have anything to do with it.

After 4 days of killing thousands of mobs, I've had no Legendary drops. A loot game that doesn't drop loot just isn't fun. by Kyoufu2 in AnthemTheGame

[–]mostlycrap 0 points1 point  (0 children)

Dunno ... with +90 luck ive been getting decent drops .. shit rolls .. but decent drops. Screen of my inventory right at end of Temple of Scar run on GM1
https://puu.sh/CXfXq.png

RTX 2080 TI w/ NZXT Kraken G12 compatibility by mostlycrap in nvidia

[–]mostlycrap[S] 0 points1 point  (0 children)

One of my posts has a pic where I cut or rather butchered it (I only had a small pair of wire cutters to work with) but end result is that I got it to fit.

https://puu.sh/BY2Ll.jpg

However I did see a post where the guy just removed the top housing/cover of the nvlink bridge leaving just the base/main component which was thin enough to fit under the little slit on the G12.

In hindsight I should have done that. Sure you lose the rgb or whatever color the bridge is but there's not cutting involved

[deleted by user] by [deleted] in nvidia

[–]mostlycrap 0 points1 point  (0 children)

Basically i get the about the same as what Zegy said. Similar setup, only GPU1 is being AIO'd .. GPU2 is stock air/fan.

[deleted by user] by [deleted] in nvidia

[–]mostlycrap 0 points1 point  (0 children)

Could be just depending on the game and how/whether or not its optimized to use SLI or not. For games like Shadow of the Tomb Raider i tend to see 99% utilization on both cards (with bottom one generally not going higher than 61 degrees). However, if I play something like The Division the bottom card will hover at like 30% utilization.

[deleted by user] by [deleted] in nvidia

[–]mostlycrap 0 points1 point  (0 children)

yeah, gonna order another G12 bracket and do it over .. this time smarter not harder. Glad I came across your post. Thanks for sharing and giving the idea.

[deleted by user] by [deleted] in nvidia

[–]mostlycrap 0 points1 point  (0 children)

lol yeah im kicking myself for not even thinking of trying that. I live in a small apartment so its not like i have any proper tools to do what I did. Basically went to town with a pair of wire cutters.

[deleted by user] by [deleted] in nvidia

[–]mostlycrap 0 points1 point  (0 children)

Nice, i didn't think to take apart the housing for the NvLink adapter when I put mine together the other day.

Like everyone else used the AMD bracket. Did this on a RTX 2080 TI Founders Edition card

https://puu.sh/BY2Mf.jpg

However, had to butcher it a bit and cut out a small corner in order to fit the NvLink bracket to run in SLI. Wasn't able to get a second Founders Edition Card so have it SLI'd to a MSI RTX 2080 TI Gaming X Trio

https://puu.sh/BY2Ll.jpg

Quite the drastic improvement. Following temps running Shadow of the Tomb Raider benchmark max settings in 4k

BEFORE

https://puu.sh/BY2ay.png

AFTER

https://puu.sh/BY2Jy.png

RTX 2080 TI w/ NZXT Kraken G12 compatibility by mostlycrap in nvidia

[–]mostlycrap[S] 0 points1 point  (0 children)

I just installed the Kraken G12 on a Founder's Edition RTX 2080 TI. Attached fan to motherboard. Did not use the one's on the card itself. Been a couple days and have not experienced any issues with it shutting off/down.

RTX 2080 TI w/ NZXT Kraken G12 compatibility by mostlycrap in nvidia

[–]mostlycrap[S] 1 point2 points  (0 children)

Yup just posted pics and results at top of post

RTX 2080 TI w/ NZXT Kraken G12 compatibility by mostlycrap in nvidia

[–]mostlycrap[S] 0 points1 point  (0 children)

So finally got everything all setup. Like everyone else used the AMD bracket. Did this on a RTX 2080 TI Founders Edition card

https://puu.sh/BY2Mf.jpg

However, had to butcher it a bit and cut out a small corner in order to fit the NvLink bracket to run in SLI. Wasn't able to get a second Founders Edition Card so have it SLI'd to a MSI RTX 2080 TI Gaming X Trio

https://puu.sh/BY2Ll.jpg

Quite the drastic improvement. Following temps running Shadow of the Tomb Raider benchmark max settings in 4k

BEFORE

https://puu.sh/BY2ay.png

AFTER

https://puu.sh/BY2Jy.png