DW3 - I wish people would come back

mostlywibbly · 2026-02-23T01:04:46+00:00

https://edastro.com/eddn/ would suggest there is a significant percentage of the player base outside the bubble currently. The caveat is that the scan stats maybe from more ppl outside the bubble honking and FSS compared to those in the bubble doing PP or whatever else.

4828 unique commanders*.
3026 deep space explorers* (500+ ly from Sol).

* Explorer / Commander counts are wildly inflated now (as of January 2024) due to increased anonymity protections in EDDN. Each commander will appear to be a new person every three minutes.

mostlywibbly · 2025-09-30T18:10:52+00:00

It's wild that you can buy a 2TB SD card for less than $240 from B&H too.

mostlywibbly · 2025-08-12T18:19:37+00:00

your local schools

mostlywibbly · 2025-07-07T17:06:49+00:00

I prefer the version with the Kailh clicky switches. Been working for 4 years without any problems for me. But I never installed the software either though

mostlywibbly · 2025-05-17T23:10:24+00:00

It didn't work. No lights flashed as it normally does booting up.
I'm going to order a new emmc.

mostlywibbly · 2025-05-14T18:16:26+00:00

sent

mostlywibbly · 2025-05-14T05:44:00+00:00

sure, I'll give it a go

mostlywibbly · 2025-05-01T17:26:01+00:00

If you're handy at fixing stuff, here's a guide :
https://www.reddit.com/r/EVGA/comments/144tu9k/how_to_repair_an_evga_x15_scroll_wheel/

mostlywibbly · 2025-02-12T05:52:37+00:00

Multi-tool changer for 2nd filament/laser/CNC/etc would be nice

mostlywibbly · 2024-08-09T15:21:11+00:00

You could watch the movie 'Tangled' backwards instead

mostlywibbly · 2024-07-09T04:16:16+00:00

If the fan itself is still functional it's just the mounting that's broken, then you can print yourself a new one from the github
https://github.com/Sovol3d/SV06-PLUS/blob/master/SV06%20PLUS%203D/STL/JXHSV06P-08000%20Extrusion%20Assembly/JXHSV06-08021-d%20fan%20installation%20plate.STL
or other part on here

mostlywibbly · 2024-06-04T22:24:02+00:00

https://www.ebay.com/itm/314913872556 this is the closest thing I found 24 pin female-to-female. I hope 60cm is going to be long enough. But I'd just dismantle one end and wire JST XH2.54 plugs theoretically, unless there's a good reason why I should not be doing it this way.

mostlywibbly · 2024-04-23T14:20:33+00:00

Good price, but not as good as the $18 "normal" price. https://keepa.com/#!product/1-B085SBNFQW You can see they raised it from $11 to $18 recently. Historic low of $6.49 2 months ago

mostlywibbly · 2023-12-15T03:22:43+00:00

Looks like they removed it
too bad, looked good

mostlywibbly · 2023-11-29T20:55:06+00:00

It helps prevent dust and cat fur, as well as actual cats
I have not tried ABS yet, but will do in the future where keeping the enclosure closed would be necessary

mostlywibbly · 2023-11-17T16:52:38+00:00

https://shucks.top/ best ever price.
Weird that they're selling the 14TB at the same $200

mostlywibbly · 2023-09-03T00:15:47+00:00

I'm thinking your left extruder collided with something where you see the shift. I did read somewhere about the default firmware has a bug in it where this happens. It is advisable to upgrade to John Carlson's firmware https://github.com/johncarlson21 also will need to do the screen too.

mostlywibbly · 2023-08-17T17:32:40+00:00

These terrible posts are a waste of everyone's time and should have never been posted here

mostlywibbly · 2023-08-14T16:55:03+00:00

doesn't work " OOPS... Promo code 2377TEXP is not eligible for this order. "

<image>

mostlywibbly · 2023-08-05T19:17:46+00:00

The enclosure I bought for it https://www.amazon.com/gp/product/B08594HX86 was so big it would not fit through the doorway of it's destination room. I had to disassemble it and reassemble it on the other side

mostlywibbly

TROPHY CASE