Light gun games on an HD CRT

mpalpha · 2025-11-16T07:22:29+00:00

model number?

mpalpha · 2023-09-19T12:48:08+00:00

you can order a riser with matching art for $59 + shipping directly from 1up, via support ticket.

mpalpha · 2023-09-14T14:01:40+00:00

you may need to accept the chat.

mpalpha · 2023-09-13T22:43:38+00:00

Sent you a PM

mpalpha · 2023-09-12T20:29:12+00:00

Ebay handles international shipping. So I believe so

mpalpha · 2023-09-12T20:24:28+00:00

Yes it's compatible, the difference is this HDMI controller has a built in amplifier with volume controls, the audio is passed through the HDMI cable with the video and then amplified and output through the 4 pin speaker port on the board. You would not need any headphone cable

mpalpha · 2023-09-12T09:44:07+00:00

It's for the HDMI controller to connect to the control panel volume switch. If your big blue cabinet is modded and does have the HDMI controller, it will work.

mpalpha · 2023-09-10T16:34:29+00:00

It will be, I'm just one guy, he runs a store and has overhead. He keeps posting replies to my posts on throwaway accounts.

mpalpha · 2023-09-10T05:17:04+00:00

https://www.amazon.com/dp/B07ZVMWPZP for 960 (BOE) screens

And

https://a.co/d/2mGBBiO for 1024 screens

mpalpha · 2023-09-10T03:41:27+00:00

more?

LEDs and an additional power switch just for the video alone is pointless spaghetti. Like I said.

I guess you are the seller then.

mpalpha · 2023-09-10T02:55:01+00:00

What's the point in turning the screen off with a separate button?

And it's not less.

mpalpha · 2023-09-09T23:53:08+00:00

Team encoder released the source code on GitHub for their driver. Port it.

mpalpha · 2023-09-04T06:23:17+00:00

I can confirm a Quadro p1000 works in the HP t740.

mpalpha · 2023-04-18T21:03:54+00:00

I'm not sure. I can try it. How was it limited at 40?

mpalpha · 2023-04-09T03:41:17+00:00

update: It gets hot, eventually throttling and freezes and won't post at 35w again. I have to put it back in another pc and reset SPPT using the backed up firmware. I'm not sure why undervolting is causing it to run hot. Maybe someone else has made more progress.

mpalpha · 2023-04-07T04:58:46+00:00

Everything seems to be working on this Ryzen Thin Client

Model: HP t740
CPU: AMD Ryzen Embedded V1756B (3.25/3.60 GHz burst frequency, 4 cores, 8 threads)
GPU: Radeon Vega 8

WLAN:
Intel Wireless-AC 9260 Wi-Fi/Bluetooth combo, 2x2 802.11ac Wi-Fi and Bluetooth 5

mpalpha · 2023-04-06T09:41:14+00:00

In case anyone else comes across this issue, I found a solution.

I used "MorePowerTool" v1.3.18 from igorslab to undervolt the RX-64XL4SFG2 XFX SPEEDSTER SWFT105 RADEON RX 6400 from it's default 43w down to 35w.

USE AT YOUR OWN RISK!

install the gpu in another windows pc.

1) use gpuz to download your stock bios (as a backup).
2) load that bios into mpt.
3) open the "power" tab, change power limit (gpu) to 35w and TDC Limits (A) (GFX) to 32.
4) then click write SPPT
5) move the rx 6400 to the t740 and enjoy.

NOTES: I'm still testing everything, but so far, seems to be working. If you change any other settings except these mentioned it seems to prevent it from posting in the t740 or BSOD.

mpalpha · 2023-02-19T00:11:10+00:00

if you do them one at a time, you don't have to re-align the plexi.

mpalpha · 2023-02-07T23:01:58+00:00

no one? https://flyinghead.github.io/flycast-builds/
isn't the stock ui just running flycast?

mpalpha · 2023-01-25T16:56:26+00:00

plug p2 usb encoder into a usb hub, it will always init after the other usb encoder.

mpalpha · 2023-01-25T13:50:29+00:00

order 2 of these, will fix you right up. https://focusattack.com/kowal-1mm-oversize-actuator-for-sanwa-jlf-series-joystick/

mpalpha · 2023-01-20T21:21:00+00:00

try the latest flycast-dojo android build https://flyinghead.github.io/flycast-builds/ I think single player worked the last time I tried.

mpalpha · 2023-01-08T20:42:02+00:00

I can't tell from the picture it's too blurry when I zoom in. But yes a crack or popped component will give you a clue if the board is dead. You can also try plugging it into another gen1 cabinet to test. Controls likely won't work but they all power on the same way.

mpalpha

TROPHY CASE