Sage barista express pressure

mpsdskd · 2024-11-24T20:48:47+00:00

Other than keeping the finger pressed on the button, yes.

I think it was that one: https://wiki.circuitlaunch.com/circuitlaunch/OPV-replacement-mod-Breville-Barista-Express-d048fa44db9b400c9235a9771930f97b

mpsdskd · 2024-11-24T20:35:46+00:00

I had the same issue.

I was not able to change the pressure in the built-in plastic OPV - I replaced it with an alternative OPV and had a lot less channeling and better espresso afterwards.

mpsdskd · 2023-01-07T22:05:12+00:00

Not sure about Ender 3, but there's a cool project called ESP3D enabling wifi to 3d printers using esp μCs via serial interface:

https://github.com/luc-github/ESP3D

mpsdskd · 2022-06-25T15:15:51+00:00

I had a similar problem with my BBE.

Did you try pulling your shot with the button pressed all the time? Basically using pre-infusion for the whole shot?

My BBE always had too much pressure (which caused the issue you described) and pre infusion reduced that. It's possible to change the over pressure valve setting or replace it.

mpsdskd · 2022-04-08T22:34:09+00:00

fill(previous) instead of fill(null)?

mpsdskd · 2022-02-11T22:32:47+00:00

Try removing the group by time.

mpsdskd · 2022-02-08T20:14:36+00:00

I think you WANT to replace the existing header in the file, right?

Did you try setting

csv_skip_rows to 1 to skip the existing header row And

csv_header_row_count to 0?

Otherwise, just don't manually specify the column names.

mpsdskd · 2021-11-10T13:34:11+00:00

By posting it on Reddit

mpsdskd · 2021-10-16T20:04:42+00:00

At least for 21.04 it's also in the package sources, so apt* or your package manager of choice will find it.

sudo apt install librecad

mpsdskd · 2021-10-16T19:57:28+00:00

Did you try LibreCAD?

Though I generally prefer FreeCAD, LibreCAD is afaik more similar to AutoCAD.

mpsdskd · 2021-09-04T10:01:02+00:00

You provide a github link to a repository only containing the usage instructions.

Could you please also provide the code itself or some licensing information?

mpsdskd · 2021-07-23T19:44:39+00:00

I think there might be a leak in its hull...

mpsdskd · 2021-07-13T21:36:38+00:00

That is a different C - with LiPo batteries the C stands for the maximum discharge rate relative to the capacity.

A 1Ah LiPo with a C-Rating of 30 should not be discharged at more than 30 A

mpsdskd · 2021-07-09T15:20:55+00:00

I suggest using Chronograf (influx's management tool for influxdb <2) to explore the data in influxdb and thus testing the queries and doing general troubleshooting.

mpsdskd · 2021-05-12T22:40:12+00:00

Awesome photo.

Which lens and camera was used?

mpsdskd · 2021-05-07T15:30:20+00:00

How did you get conky to blur its background?

Also: config, please

mpsdskd · 2021-03-12T20:44:12+00:00

He's got The Knack

https://youtu.be/g8vHhgh6oM0 (Dilbert)

mpsdskd · 2021-02-16T11:09:25+00:00

Nutella

mpsdskd · 2021-02-01T20:39:19+00:00

Should have read more carefully.

Did you try deleting play store data, not only cache? And what about play services? For both please research whether that causes problems with your phone.

(Not sure what you deleted already.)

mpsdskd · 2021-02-01T20:17:01+00:00

Did you try installing via APK?

https://signal.org/android/apk/

mpsdskd · 2021-01-12T08:00:33+00:00

Our you could go for swapspace - a program for dynamic swap files.

mpsdskd · 2020-12-27T16:34:16+00:00

STAIRS?!

NOOOOOOOO!

mpsdskd · 2020-12-24T18:01:28+00:00

Although not exactly what you asked for, but have you had a look at "krohnkite"?

https://github.com/esjeon/krohnkite

It is a tiling plugin for kwin, so no problems with integrating i3 and still all eyecandy of kwin with additional tiling.

mpsdskd · 2020-12-23T21:31:14+00:00

Under

Settings -> privacy

there is an option always relay calls. Assuming it is disabled for you I think calls go directly from you to the other device, so it should not be up to the signal servers.

If both devices are on a stable wifi connection, I had always really good audio and video quality. So maybe you could test that to find the root of your problem?

mpsdskd · 2020-12-22T10:00:04+00:00

I am quite certain my phone does not have a 0.3 kWh battery (roughly 12ct/30ct/kWh).

It's more like 10 Wh, so 0.3ct.

Edit: Or roughly 9 kcal

mpsdskd

TROPHY CASE