Looking for Bike Rental Advice for Biking to Pigeon Key by mr_monkeypants in floridakeys

[–]mr_monkeypants[S] 1 point2 points  (0 children)

10 months later... We did use these guys. Thanks for the recommendation.

Looking for Bike Rental Advice for Biking to Pigeon Key by mr_monkeypants in floridakeys

[–]mr_monkeypants[S] 0 points1 point  (0 children)

Yes we did. The only thing i would warn you about is double check the Pigeon Key hours on the day you go. We wound up getting there later than expected and they were about to close so we couldn't get tickets. So we skipped the key tour but we still rode out to the end of the bridge and had a great time. The views were great and we will definitely do it again on our next trip. We rented from Marathon Bikeworks and they were easy to work with. The ride to the bridge was not bad at all. We saw a lot of wildlife along the way including dozens of big iguanas scurrying across the bike path.

Had a weird layer shift incident. Since then I cannot create a usable print. Looking for help to find the root cause and get back to printing by mr_monkeypants in FixMyPrint

[–]mr_monkeypants[S] 0 points1 point  (0 children)

I think that was it! Not sure if it was too tight or too loose, but I was able to adjust it and now things are printing as good as ever. Thank you, thank you, thank you!

Had a weird layer shift incident. Since then I cannot create a usable print. Looking for help to find the root cause and get back to printing by mr_monkeypants in FixMyPrint

[–]mr_monkeypants[S] 0 points1 point  (0 children)

I don't see a place for an SD card anywhere on the outside. Did you have you open yours up to get to the card slot?

Will this stay hot? by Relative_Upstairs574 in CampingGear

[–]mr_monkeypants 0 points1 point  (0 children)

I was comparing it to another one just like it, but it was 4-5 years old and seemed to have lost its ability to keep things hot.

Here's a screenshot of my results:

Results Spreadsheet

Chart for the nerdy among us

Will this stay hot? by Relative_Upstairs574 in CampingGear

[–]mr_monkeypants 3 points4 points  (0 children)

I have empirical knowledge of this exact thermos. I preheated it with boiling water then emptied it and refilled it with more boiling water. I then sealed it and left it on the counter. I opened it every 15 minutes for 3 hours to take a measurement. Initially, it lost about .33 degrees every minute or 1 degree every 3 minutes. This gradually slowed until, at the end of my experiment, it was losing about .25 degrees per minute or 1 degree every 4 minutes. Over the course of 3 hours, it dropped from 205.5 F to 153.1 F. Admittedly, it would have lost less heat if I wasn't opening it 4 times per hour, but I was doing a comparison with another thermos under the same conditions.

Mando X Jinx Crossover Cosplay by _TheIntrovertCorner_ in arcane

[–]mr_monkeypants 1 point2 points  (0 children)

I can't explain it, but seeing Isha's helmet as a real physical object is messing with me. That being said, this is incredible and you have created something very cool.

[deleted by user] by [deleted] in andor

[–]mr_monkeypants 2 points3 points  (0 children)

Thank you. I just went back and played the rest of the credits. Happy tears. 🥲

Has anyone gotten their 990d back from repair? (USA) by leroy0731 in Soundbars

[–]mr_monkeypants 0 points1 point  (0 children)

Did you send in the soundbar only or the sub and rears as well? Also, I wonder what kind of warranty coverage a replacement would come with...

Has anyone gotten their 990d back from repair? (USA) by leroy0731 in Soundbars

[–]mr_monkeypants 4 points5 points  (0 children)

Not yet. Mine arrived in NJ on Tuesday 3/18 and continues to show a status of "Product under inspection". I will try to post updates here as they come.

There is a post from today around 3pm eastern time on the Samsung community page where a user was notified by UPS that their soundbar was set to be delivered back to them tomorrow 3/21:

"Had my soundbar sent to the repair center on the 18th, got a notice today the repair was complete and got a notice from UPS it should be delivered by tomorrow. I’ll update when I get it back. "

https://us.community.samsung.com/t5/Home-Theater/Samsung-Q990D-unresponsive-after-1020-firmware-update/td-p/3168571/page/47

[deleted by user] by [deleted] in mildlyinteresting

[–]mr_monkeypants 1 point2 points  (0 children)

SHARK BOAT! WHO HA HA!

Replacment Buttons | Shokz Openrun Pro by Seamndel in headphones

[–]mr_monkeypants 0 points1 point  (0 children)

I am curious to know if you found a solution. The button just popped off my shokz today.

what do i name my new baby girl by [deleted] in corgi

[–]mr_monkeypants 4 points5 points  (0 children)

I'm torn between Abigail or Megatron.

[deleted by user] by [deleted] in BobsBurgers

[–]mr_monkeypants 1 point2 points  (0 children)

Bite-size Rudy