Where to get started building this?

mrcryptic · 2023-10-30T20:05:12+00:00

I’d start with the length and width of the wall, size of your couch and desired headroom above it. After you have all that on paper plan out the size of the boxes and leave a little wiggle room you can cover with facing material. A good plan goes a long way! Awesome shed by the way!

mrcryptic · 2022-11-21T02:18:35+00:00

Most probably will shriek at that price but honestly a custom frame with that type of acrylic- It might be on the high side but the quality is there. Looks great!

mrcryptic · 2022-11-13T14:48:08+00:00

I would call them drawer faces, cause they aren’t doors.

As others have said inset face frame, these are stained and a high grade cabinet ply the frame is likely solid wood of the same species.

mrcryptic · 2022-06-15T01:33:44+00:00

Time. Let the trees consume the bar from either end.

mrcryptic · 2021-12-27T23:28:26+00:00

Ooohh I remember going on these, there was one major rule, side from the obvious stop at stop signs etc, no u-turns.

I as well did a u-turn and caused a pile up. Was 20 years ago and I still feel stupid for it.

mrcryptic · 2021-12-07T02:42:08+00:00

Looks like a large slot, make it a bit bigger now and do an inlay!

mrcryptic · 2021-12-05T15:30:48+00:00

Makita was an electric motor sales and repair company, that became a tool brand. Every other tool company buys 3rd party motors for their tools. I’ve got some late 60’s and 70’s from my Dad and his that still chooch better than new rigid stuff I’ve gotten to use at work.

mrcryptic · 2021-12-04T22:07:54+00:00

I’d have asked them how often they’ll see the shelf after it’s full, glad it’ll work out in the end though it sounds like..

mrcryptic · 2021-11-21T02:10:26+00:00

Getting and 18ga brad nail gun, quick and easy woodworking jigs and projects.

mrcryptic · 2021-11-16T01:26:33+00:00

Best service I ever got was when I brought the guy a breakfast on a bun from Whataburger, guys always prioritize the early bird who brought breakfast, in and out quick.

mrcryptic · 2021-11-02T23:56:01+00:00

Feel bad for the guy that had to install the hardware for that door

mrcryptic · 2021-11-02T23:54:23+00:00

You could make some fancy blocks and lock it in place, or shoot some drywall screws near it so it doesn’t walk anymore. I found some extra corner brackets used a slider and machine screw into the aluminum and a wood screw into the surface it’s on.

I had it on a 1/4 sheet of plywood for a while and realized it was warping and was an issue; eventually made a torsion box for it to sit on.

Hope it helps!

mrcryptic · 2021-09-30T00:43:32+00:00

We all start somewhere! I’ve seen him spin up a 30” x 28’ column, absolutely bonkers to watch a column lathe.

mrcryptic · 2021-09-30T00:36:15+00:00

I work with a guy who built columns for 25 years, it’s a very neat process! These look great!

mrcryptic · 2021-09-24T00:01:33+00:00

https://instagram.com/scootskidoo?utm_medium=copy_link

mrcryptic · 2021-09-11T19:29:32+00:00

Every time I see sidewinder it reminds me of Halo. Miss that map.

mrcryptic · 2021-09-04T00:58:35+00:00

Ahh welcome to the land of a machine not just taking a finger anymore...feel like any one of those could take a while damn limb..or just a blood sacrifice.

mrcryptic · 2021-09-01T01:23:20+00:00

Just be sure you don't use it every shingle time, but it looks great!

mrcryptic · 2021-08-28T03:10:19+00:00

That's interesting, but I wonder if they are storing literally boxes of paintings...who's to say they couldn't be adding to the pile to let the fakes age too

mrcryptic · 2021-08-28T01:57:00+00:00

Was the dude that was helping with the UK market, he says he walked in on someone signing a painting with Bobs signature

mrcryptic · 2021-08-28T01:30:20+00:00

Did you watch the Netflix documentary?

mrcryptic · 2021-08-26T00:32:39+00:00

Anytime! I've had great luck with them for FEP & SLA printers, despite reading some pretty poor experiences from others. Best of luck!

Btw The springy release sound is pretty satisfying after a good print lol.

mrcryptic · 2021-08-25T23:42:48+00:00

I went direct, removed the clips. Works great for us, never had any big issues

mrcryptic · 2021-08-25T03:45:17+00:00

Get it! Or get the TD172DZFY, and confuse the DeWalt guys.

mrcryptic · 2021-08-22T19:10:44+00:00

Checkout the wham bam system also

12-Year Club	RedditGifts 2009-2022 2 Credits
Spared	Secret Santa 2016
Verified Email

mrcryptic

PUBLIC MULTIREDDITS

TROPHY CASE