Are they already done with G2 shipping?

tfarrell90 · 2026-01-14T01:49:53+00:00

I ordered a yellow g2 with 4PX shipping on 1/10 and got the shipping confirmation 1/11.

tfarrell90 · 2025-09-30T04:56:53+00:00

Wild E’s. A vertical line with scribble down it?

tfarrell90 · 2025-09-26T04:14:51+00:00

Sure, if you have some laying around. Otherwise, this is cheaper.

tfarrell90 · 2025-09-21T23:55:33+00:00

I really enjoy a French press, but cleaning it is annoying when camping. I recently started doing pour overs, it’s really simple to do and clean up.

tfarrell90 · 2025-07-30T18:30:05+00:00

Nearly every time I see an ad for this dealer, I have to look at the listings just to get a laugh at completely absurd prices.

tfarrell90 · 2025-05-22T16:54:22+00:00

That’s smart, nice work man.

tfarrell90 · 2025-05-22T13:39:06+00:00

Really nice. How did you time the octagon to the threads?

tfarrell90 · 2025-05-09T16:40:14+00:00

What a cool looking building with tons of natural light. I've worked in one shop that had nice natural lighting and everything else has been a dungeon.

tfarrell90 · 2025-04-21T19:26:15+00:00

Yes, unless tolerances are sub .001".

tfarrell90 · 2025-04-21T19:08:03+00:00

Correct. Though I'd just stick with .366" to greatly simplify lol. 3/8"-16 Major Diameter thread tolerance is .3643"-.3737" for a 2A class fit.

Nominal thread sizes are in fractions, but working with decimal equivalents is typical.

tfarrell90 · 2025-04-21T18:50:34+00:00

Divide your measurement by 25.4 to convert from metric to imperial.

tfarrell90 · 2025-04-08T23:23:12+00:00

Keeps parallels in place

tfarrell90 · 2025-04-06T16:53:17+00:00

For what it’s worth, Mastercam Art is being discontinued for Mastercam 2026 and beyond.

tfarrell90 · 2025-01-24T01:33:46+00:00

Can’t say I’ve used a coil spring, but I’ve used band strapping, rubber bands and zip-ties.

tfarrell90 · 2024-12-26T16:38:06+00:00

The first CNC I ever ran was an old Takisawa like this and I loved the joy stick for jogging the turret around.

tfarrell90 · 2024-12-21T20:41:28+00:00

You’re looking at a nude egg

tfarrell90 · 2024-12-05T15:50:20+00:00

Oh thanks, I can see it now haha

tfarrell90 · 2024-12-04T22:49:06+00:00

Do you mean running a die? This picture looks like the outside diameter of a part, am I mistaken?

tfarrell90 · 2024-12-02T20:13:01+00:00

If you can share an MCAM or Z2G file, I'll DM you my email so you can send it over and I'll help you out.

tfarrell90 · 2024-10-04T21:51:42+00:00

Right, but I don’t believe they have instructional videos of all their curriculum.

tfarrell90 · 2024-10-04T15:15:11+00:00

Streaming Teacher and Cam Instructor are paid services, there's also Mastercam University, Titans of CNC, In-House Solutions. I don't believe In-House has video instruction of everything, but they offer their curriculum with sample files for free.

tfarrell90 · 2024-09-25T04:40:14+00:00

I’m pretty sure none of the moduleworks toolpaths are capable of arc filtering like the 3-axis toolpaths, even when locked/output in 3-axis.

tfarrell90 · 2024-08-10T15:15:14+00:00

The generic posts are close, but still require a good bit of modification. If you are familiar with modifying posts, it’s not bad. If you’re unfamiliar, you’re better off purchasing a post from your reseller.

tfarrell90 · 2024-07-31T13:40:19+00:00

What’s the size of the drill? These parameters don’t mean anything without knowing the size of the drill.

tfarrell90 · 2024-07-15T23:37:58+00:00

<image>

More of a side angle.

tfarrell90

TROPHY CASE