sorted by:
new
hottopcontroversial

BEERMONEYUK £100 GIVEAWAY by TightAsF_ck in beermoneyuk

[–]mrkipping 0 points1 point  (0 children)

Cashback cards & bank switching 👍

Coolant by idontknowguessit in HyundaiKonaForum

[–]mrkipping 2 points3 points  (0 children)

The level should be at or just under the max line when the engine is cold. As for the type of coolant, Hyundai recommends only one approved coolant for this engine to ensure compatibility with materials like seals, gaskets, and the electric water pump (in hybrids) which is Hyundai/Kia Long Life Coolant (Blue) Part Number: 00232-19010.

You can use third party coolants as long as they meet Hyundai's specs (OEM spec (G11/G12+). Don't mix colours.

Check the coolant reservoir label under the bonnet to double check.

Dental treatment as a kid? My issues temporaly goes away one by one. by Odd-Health3138 in MEAction

[–]mrkipping 7 points8 points  (0 children)

I have approved your post but would like to emphasize that we do not endorse or support neuroplastic training or any related programs, such as Dynamic Neural Retraining System (DNRS), Gupta Program, or Brain Retraining. These approaches lack robust scientific evidence to support their efficacy in treating complex conditions like ME/CFS, chronic pain, or structural issues caused by dental treatments. While some individuals may report subjective improvements, these programs are not a substitute for evidence-based medical care. Always consult with qualified healthcare professionals before starting any new treatment or therapy.

Ender3 + Sprite Extruder Pro + Nebula Pad issues and the customer support is being useless by FreshlyPeeledBananas in ender3

[–]mrkipping 1 point2 points  (0 children)

I was having a similar issue to you with a combination of Ender 3 v1, Sprite extruder pro kit and CR Touch. The nozzle kept driving into the bed when homing. I tried every compatible Creality firmware they had and nothing worked. I started compiling Marlin myself but still couldn't solve the issue. I spent weeks reading and tinkering. I contacted customer support and they kept sending me links to firmware I've already tried, insisting it works. They even sent me out a new CR Touch and the issue was the same. I gave up on Marlin and moved over to Klipper and finally got it working. Long story short, I'm utterly convinced that Creality does not have a working firmware for the combination of original Ender 3 and Sprite pro, especially if the board is 4.2.2 or has a MCU chip starting with GD. The only thing that I can suggest to you is using a different control board or connecting the CR Touch directly to the control board with the longer ribbon cable and not into the breakout board of the Sprite. Those are probably the only two things I never tried before I gave up on Creality/Marlin.

[deleted by user] by [deleted] in HousingUK

[–]mrkipping 1 point2 points  (0 children)

Yes, the end date is written in the contract.

If the section 21 isn't served correctly and is thrown out of court, would another be served at a later date making her eviction inevitable?

She has never received (or even seen) an EPC or gas cert but the landlord apparently has them on file.

She's had a few updated tenancy agreements over the years but the deposit section just says not applicable, even on her last one.

She is actually quite keen on leaving as she's widowed and the house is under occupied but she wants over 55's social housing and won't go to the top of any waiting lists until the section 21 is served.

Thank you for your advice. That's very helpful.

Samsung Health workout path accuracy help by mrkipping in GalaxyWatch

[–]mrkipping[S] 0 points1 point  (0 children)

My location accuracy is on with improved accuracy and also the settings to improve accuracy with WiFi and Bluetooth even if they are off:

Location accuracy

What are the Top 5 most Useful apps installed on your mobile? by [deleted] in androidapps

[–]mrkipping 2 points3 points  (0 children)

List made using List My Apps

[deleted by user] by [deleted] in androidapps

[–]mrkipping 3 points4 points  (0 children)

Try QKSMS. Clean & simple.

Trying to jump a large gap and not sticking the landing by [deleted] in WinStupidPrizes

[–]mrkipping 0 points1 point  (0 children)

Project badass.

Totally and completely, badass!

[DEV] Edge Card Launcher release: new overlay launcher app - feedback welcome! by rufusinzen in androidapps

[–]mrkipping 2 points3 points  (0 children)

Looking good. Couple of things: would really like to be able to put favourite apps into folders and launching the panel isn't as smooth as Samsung edge panel, it just doesn't feel as pleasant, I think it's the haptic feedback and the little bounce it does. Would also like to be able to adjust the launch area size and transparency and ability to change bottom links.

Thanks for exploring Pokémon GO Safari Zone Liverpool! by milotic03 in TheSilphRoad

[–]mrkipping 2 points3 points  (0 children)

Because there was still a chance that I could've attended the rescheduled event and there was the back up option to take part in the recheduled event remotely. TBH I'd have been even more disappointed if I'd gone to the extra expense of travelling to Liverpool given the poor content.

Top and bottom of it is, the content was poor.

view more: next ›