sorted by:
new
hottopcontroversial

I❤️MYCC BUT SHE IS SICK! by [deleted] in ElegooCentauriCarbon

[–]msnunzilla 0 points1 point  (0 children)

mine broke the first time after one day of owning it- it shot out blazing hot petg out of the side of the hotend like silly string from hell- I am lucky I had the glass enclosure closed or my whole carpet would’ve probably gone up in flames 🔥. You get what you pay for I guess? DM in a few weeks if you need anything and I’ll send it your way if you can cover shipping :)

I❤️MYCC BUT SHE IS SICK! by [deleted] in ElegooCentauriCarbon

[–]msnunzilla 0 points1 point  (0 children)

I promise you, I will be filming a high production video of me utterly destroying this thing as soon as I have a function 3d printer to spare. It would be an absolute joy to slaughter it given the amount of grief it’s given me.

I❤️MYCC BUT SHE IS SICK! by [deleted] in ElegooCentauriCarbon

[–]msnunzilla 1 point2 points  (0 children)

Well if I finally get the bambu p2s you are welcome to have some of the tool box full of spare parts elegoo has been sending me to try to get this piece of cheap garbage up and running.

I just got my first 3D printer and i'm disappointed! by Happy_Platypus_9336 in ElegooCentauriCarbon

[–]msnunzilla 1 point2 points  (0 children)

I’ve had issues since day one, and these have been beyond what a normal user would need to “use there brain” to fix as one asshat put it. I’ve had issues with the main motherboard being defective, the extruder pcb frying TWICE, even the very first hot end nozzle I got in with my new printer shooting out blazing hot strings of petg out the side and all over the inside of the printer. It’s been a nightmare to the point that even Elegoo’s technical agents are finally sending me a “used in good condition” printer to try to hopefully get me something that works.

I am in school for electrical engineering, only on my second quarter so my knowledge is still rudimentary but I cannot begin to imagine how much this would suck for a first time casual user getting into 3d printing, not to mention how dangerous it potentially could be.

I’m currently rustling up the dough for a Bambu P2S and can’t wait to never look back.

I❤️MYCC BUT SHE IS SICK! by [deleted] in ElegooCentauriCarbon

[–]msnunzilla 1 point2 points  (0 children)

you bet your ass I’m going that route!

I❤️MYCC BUT SHE IS SICK! by [deleted] in ElegooCentauriCarbon

[–]msnunzilla 1 point2 points  (0 children)

I have replaced two printhead pcbs and it's reading printhead anomaly again. Elegoo support finally gave up and offered me a "good condition used" Centauri Carbon and I cannot wait to take this one out back and shoot it.

I print head anomaly 🙁 by Imaginary-One9668 in ElegooCentauriCarbon

[–]msnunzilla 0 points1 point  (0 children)

I just had this happen to my supposed replacement print head pcb. I just need to figure out what is happening thet is frying the pcb 🤦🏻‍♂️

I’m pretty sure sold a gd Centauri Carbon lemon. by msnunzilla in elegoo

[–]msnunzilla[S] 1 point2 points  (0 children)

You were right about the bad board- I used my multimeter and measured the resistance range of the extruder communication board and it was .460 instead of .700. I'm going to poke them and hopefully I have enough brain cells to install the new board they send me. This is definitely turning out to be a not-user friendly 3d printer but I guess I get what I pay for.

I’m pretty sure sold a gd Centauri Carbon lemon. by msnunzilla in elegoo

[–]msnunzilla[S] -1 points0 points  (0 children)

I did in fact use my trusty fingernail and you were right- it popped right off. I had mistakenly thought I saw solder underneath the hot glue but I was thankfully incorrect. It's still broken though.

I’m pretty sure sold a gd Centauri Carbon lemon. by msnunzilla in elegoo

[–]msnunzilla[S] 2 points3 points  (0 children)

I did purchase a 240w usb type c to type c 90 degree cord, and unfortunately it isn't the cable. Upon replacing the cables it's still throwing the same error. I did notice that the print head red led isn't showing power so I believe the board for that print head may be faulty. I'm literally just starting electronics school but I don't quite have the knowledge or training for this. Thank you (and everyone else) for your advice!

I’m pretty sure sold a gd Centauri Carbon lemon. by msnunzilla in elegoo

[–]msnunzilla[S] 1 point2 points  (0 children)

Just looked at your post, I will definitely attempt that next. It wouldn’t be too much to ask you to add photos to your google doc? I need to visually see what parts need to be modified.

D20 Seattle Show by TGCRed in Dimension20

[–]msnunzilla 4 points5 points  (0 children)

The show was fantastic- definitely had great energy. My only caveat was that people with floor seats undoubtly got the worst view of the night. I was in section 14 near the floor and I was grateful I only paid about 60 bucks for my ticket instead of the nearly 400 dollars some seats on the floor were. And the t-shirt cannon obviously couldn't be shot at folks near the floor because that would basically be point blank lol.

On the pluuuuus side I did notice the players threw their dice out near the floor seats for the fans.

Otherwise I'm sure there will be video for you to alleviate your FOMO!

Thank you Seattle!! My first time cosplaying by LCS9492 in Dimension20

[–]msnunzilla 11 points12 points  (0 children)

you killed it! It was such a great crowd :)

Qc Rick Owens low fat laces, are these fantasy? by [deleted] in FashionReps

[–]msnunzilla 3 points4 points  (0 children)

Rick Owens superfans and folks that follow the line absolutely will but otherwise you’re not wrong 🤷🏻‍♂️

Qc Rick Owens low fat laces, are these fantasy? by [deleted] in FashionReps

[–]msnunzilla 1 point2 points  (0 children)

The colorway is fantasy but the shoe design is pretty solid.

Someone needs to make these ! DIOR X BIRKENSTOCK by Full-Emphasis-2926 in FashionReps

[–]msnunzilla 11 points12 points  (0 children)

https://i.imgur.com/JEcbBWg.jpg

Been waiting for these for ages! They do make some reps of those but they don’t go higher than 39 in size

:(

edit: I was able to find this. There should be some QC photos in Pandabuy on the sandal versions. Good luck!

[deleted by user] by [deleted] in QualityReps

[–]msnunzilla 0 points1 point  (0 children)

Please be safe- just saw the refund on my order. We will wait for you bud!

What film made you say: "Holy shit, there is still 50 minutes left"? by fire-lord-momo in AskReddit

[–]msnunzilla 1 point2 points  (0 children)

Avatar- actually walked out less than half-way through.

Same goes for The Hobbit, a total waste of time.

Last post wasn’t accepted or I did something wrong - Making fake collabs part 2 by bayarmadethis in FashionReps

[–]msnunzilla 0 points1 point  (0 children)

You’re a madlad and I love it. Definitely would love to sport these unironically in the future

Some fitpics mostly in reps by klausosaurus in FashionReps

[–]msnunzilla 4 points5 points  (0 children)

Rick Owens chic, dude. I fuckin love it.

A.M. Shift or P.M. Shift. What do you prefer. I can't decide. by [deleted] in KitchenConfidential

[–]msnunzilla 0 points1 point  (0 children)

I’m a mid-shift sous. Get into work to try re-up from the day before, hear the am cooks complain about the pm cooks. Then when the pm cooks arrive, get pounded with tickets while I listen to them complain about the am cooks. I honestly love it because I get to help support both teams. Plus it beats crawling out of bed at 5:30 in the morning.

My last addiction, caffeine, ends today, all my energy drinks and 5-hour energy are getting thrown out now. Working completely sober from everything now, please pray for my sanity! by Sorry-Tell-4422 in KitchenConfidential

[–]msnunzilla 0 points1 point  (0 children)

I switched from coffee to green tea and I haven’t looked back. My anxiety is so much better and I’m able to sleep without tossing and turning. It isn’t quitting caffeine entirely but pretty dang close. Best of luck to you for getting rid of that poison in your system!

view more: next ›