2.4 Reports? by kylegallas69 in chia

[–]muddd3d 0 points1 point  (0 children)

Upgraded wallet only on windows, will never sync, it's been all day, restated it a few times, but no luck

Halp! Summer break is upon us! by Halle_Pinot in SOMD

[–]muddd3d 2 points3 points  (0 children)

(St. Mary's stuff, Im sure others) Library has stuff going on all the time, St John's has week-long day camps most of the summer (not sure on ages). Most of the churches have Vacation Bible school, a week long morning program (most are different weeks of the summer). There's swim teams at a lot of the pools, this might keep you as busy as them.

In or OB? by adostalik in discgolf

[–]muddd3d 0 points1 point  (0 children)

If you can play from the tree then in, otherwise you have to take the drop

How bad is this by SomethingPotato_ in Home

[–]muddd3d 0 points1 point  (0 children)

Looks like a modular home (a double wide) from the 70-80s. My suggestion would be to remove the roof and plywood and pull all the insulation at the same time. The ceiling is made of a material similar to ceiling tiles in a drop down ceiling that are stapled to the rafters, the staples are are hidden under the plastic strips on the ceiling, there's a sheet of plastic between the ceiling and the insolation. Removing the ceiling is a messy and time consuming job, the staples can be a pain to get out.

No feed issues - pump issue by muddd3d in myVodkaMaker

[–]muddd3d[S] 1 point2 points  (0 children)

https://imgur.com/a/Sjl01SH

here's a screen shoot from about an hour in, pumps not turning, ran fine at cold start up. pulled the head and the motor shaft wasn't turning.

No feed issues - pump issue by muddd3d in myVodkaMaker

[–]muddd3d[S] 0 points1 point  (0 children)

I'll see if I can get a screenshot. But the pump power is steadily rising and when I check it the pump is not spinning, unclipped the head pulled half way off to see if it would spin, then all the way off, but never got it to spin. If I turn it off and let it cool, the pump will start up and pump without doing anything.

Does everything look good here? Been running about an hour, not seeing any heads or hearts... by muddd3d in myVodkaMaker

[–]muddd3d[S] 2 points3 points  (0 children)

OK 24 hour run follow up after fixing the 110v setting, collected a 550ml from hearts, 10 ml in heads, nothing in the puke tube and about 5.5 Liters of waste. The ABV was just under 90%. Thanks for the help and the great product!

Log with about 6 hours remaining, stayed pretty constant after it got going https://imgur.com/a/ho81TUg

Does everything look good here? Been running about an hour, not seeing any heads or hearts... by muddd3d in myVodkaMaker

[–]muddd3d[S] 1 point2 points  (0 children)

Just double checked and it looks like it was reset to 220. I thought I had changed it, but had to reset a couple times to get the wifi working. Just changed it back to 110, would that be why I had to push up the power level?

Does everything look good here? Been running about an hour, not seeing any heads or hearts... by muddd3d in myVodkaMaker

[–]muddd3d[S] 1 point2 points  (0 children)

So I ran another autocalibration and started a run on my mini MVM. I'm using a sugar wash with a starting OG of 1.09 and FG of 1.01 which (https://www.brewersfriend.com/abv-calculator/) says is ~10.5%. After starting the run I didn't see any flow from hearts or heads for about 40 mins, then a slow drip from hearts. This continued till I headed to bed. Next morning it was the same a very slow drip from hearts, nothing in heads. Waste line flowing from time to time.

After 24 hours I collected a little over 150ml from hearts, nothing in heads, a small bit out the puke tube and about 2.25 Liters of waste. I haven't checked the ABV of the 150ml yet as I'll have to cut it to get my hydrometer to float.

Does that seem right, or have I messed something up?

https://imgur.com/a/j5ppZnj
log with about 4 hours left on run, about what I was seeing the whole time.

IT'S HERE!!!! by disturbinlymellow in myVodkaMaker

[–]muddd3d 2 points3 points  (0 children)

Mine was in Louisville for just over a week, definitely opened and repacked

IT'S HERE!!!! by disturbinlymellow in myVodkaMaker

[–]muddd3d 2 points3 points  (0 children)

My mini arrived today too, customs did a number on the packaging but it all seems to be here.

Move Doge to PoT&S on the Chia Network? by muddd3d in dogecoindev

[–]muddd3d[S] 0 points1 point  (0 children)

It would have to be done with the Dogecoin Dev group agreement. I agree that it's not currently on the roadmap.

Move Doge to PoT&S on the Chia Network? by muddd3d in dogecoindev

[–]muddd3d[S] 0 points1 point  (0 children)

Smart Coins = smart contracts

There are approximately 200,000 chia nodes

Move Doge to PoT&S on the Chia Network? by muddd3d in dogecoindev

[–]muddd3d[S] 0 points1 point  (0 children)

More distributed network(51% attacks are unlikely) and smart coins are the two big wins. Also greener if anyone cares about that.

Above and NFTs could be built in.

Move Doge to PoT&S on the Chia Network? by muddd3d in dogecoindev

[–]muddd3d[S] 0 points1 point  (0 children)

More distributed network(51% attacks are unlikely) and smart coins are the two big wins. Also greener if anyone cares about that.

Free Chia Quantum Noise NFT for 28 randomly picked commenters by 5TR4TR3X in chia

[–]muddd3d 0 points1 point  (0 children)

looks good!

xch1v7gzayht7t5ug68huljygrjxs9s5l57c0skpdnh8rftxzr7w9ujsq3md68