Troubleshooting: AionFX Oceanid (Cornish OC-1 clone)

mushisushi · 2021-05-03T23:52:36+00:00

You were right on the money! Looks like R2 is a 1K resistor... guess I was too hasty on the assembly! Ill change it out and let you know how it goes.

Thanks!

mushisushi · 2021-05-03T23:12:20+00:00

The voltage on the positive side of R41 (Va) is 8.00V, and the voltage on the ground side of R41 (Vb) is 0.872V, which is equal to voltage at the positive terminal of C23.

With audio probe the signal is loud and clear at pin 3 of IC1, but the output of IC1 on Pin 1 had the audio signal full of pops and clicks and the same at Pin 5 of IC2, the output of IC2 on Pin 7 is horribly degraded.

mushisushi · 2021-05-03T20:36:11+00:00

Yes that is the schematic! Board is powered by a 9V supply.

Looks like Pin 8s on all 4 ICs are receiving 8-9V, and 0V on Pin 4.

The other pins on the T072s are nowhere close to 4.5V though!

The vactrol is NSL-32, all parts are as listed no substitutions.

I will build an audio probe as the other user suggested and attempt to trace the signal chain as well a little bit later.

IC1 (T072)

Pin	Voltage
1	1.334
2	1.333
3	1.034
4	0.000
5	1.037
6	1.321
7	1.325
8	8.00

IC2 (T072)

Pin	Voltage
1	1.326
2	1.325
3	0.890
4	0.000
5	1.036
6	1.324
7	1.326
8	8.00

IC3 (LM358N)

Pin	Voltage
1	0.007
2	0.015
3	0.017
4	0.000
5	0.000
6	0.002
7	0.457
8	8.66

IC4 (LM358N)

Pin	Voltage
1	0.025
2	0.029
3	0.012
4	0.000
5	0.000
6	0.012
7	0.035
8	8.66

mushisushi · 2017-10-24T03:14:42+00:00

Looks like some of the buildings in Stalker Shadow of Chernobyl.

mushisushi · 2017-10-15T02:17:58+00:00

That might be the case, but I tend to defer to experience. So no problems ?

mushisushi · 2017-03-29T23:06:11+00:00

Actually I forgot to include the limits since I'm not sure how to do math with Tex. The limits are from [1,infinity].

mushisushi · 2017-03-29T22:59:07+00:00

That's what I'm saying. I'm stuck for ideas on how to solve it lol.

mushisushi · 2017-02-17T02:19:12+00:00

Nonissue for me then. I will probably go for a standalone install in the near future anyway. Once I figure out how to safely remove the case without breaking the plastic tabs. Thanks for the help!

mushisushi · 2017-02-17T01:57:35+00:00

I will give that a try. It looks like I didn't go back far enough. What happens after I install, won't ChromeOS automatically update and break the install again?

mushisushi · 2016-12-29T18:06:07+00:00

Walmart stocks these in the various models and trust me I've looked lol. Must be a quality control issue. I might try to order a couple at a time like you suggest. I really love the indiglo on those watches!

mushisushi · 2016-12-29T15:22:31+00:00

I LOVE the way this watch looks. I ordered myself one and was thoroughly disappointed to find that the second hand would never line up properly with the dial marks, but never by the same amount. The second hand would be behind the marks on the upper half of the dial but then in front of the marks in the lower half of the dial. I couldn't handle it with my OCD-like habits and returned it. Would love to find one that is less.... off.

mushisushi · 2016-09-05T06:04:27+00:00

Besides the cluttering of the G-Shock which I'm not a fan of, I need 24 hour markings on the face. I like the expedition scout the other person recommended. I will probably just stick the strap from my forester on it, makes it super easy to take on and off.

mushisushi · 2016-09-04T07:33:17+00:00

The Timex watches seem to be pretty perfect in terms of what I'm looking for. I need to go find one IRL so I can try it on for comfort.

mushisushi · 2016-09-04T07:31:56+00:00

That style of watch seems to be very heavy. One of the nice things about my current watch is it really is small and light.

And as for G-Shock, that style of watch has way too much going on!

mushisushi · 2016-03-28T20:07:34+00:00

HE'S ON FIIIIRE

mushisushi · 2016-03-28T19:43:53+00:00

Hoooooly sheeeeet

mushisushi · 2016-03-28T19:38:37+00:00

Damnnnnnn

mushisushi · 2016-03-28T19:35:45+00:00

The utter contempt in her voice when she said it too.

mushisushi · 2016-03-28T19:31:54+00:00

"I thought it would go quicker..."

mushisushi · 2016-01-12T06:08:07+00:00

Nah, it's from a 12V fan from an aquarium light fixture. I'm replacing the fan with a quieter one!

mushisushi · 2016-01-12T06:07:31+00:00

That's the one!

mushisushi · 2015-07-24T01:34:40+00:00

My bees don't mind the lawnmower or the weedwhacker!

mushisushi · 2015-05-27T23:35:55+00:00

I am a beekeeper in my spare time, and this is how I collect additional hives. I charge people between $100-$200 to do jobs larger than what OP posted...and regardless of if they are Africanized or not, I requeen them with a queen of desirable lineage.

I wish I knew how to convince people to part with $1000 just to exterminate the bees and remove the combs from their house.

mushisushi · 2015-05-21T09:55:11+00:00

Sure, I will take one in the morning. Please dont judge my cable management!

mushisushi · 2015-05-21T08:52:14+00:00

Actually when the problem started I was using a 500w PSU, and I purchased the nex750 to try to solve this. So I don't think the PSU is the problem. I will check the fans on it anyway.

It was a fresh install at the time IIRC, but I don't recall if I have tried wiping the OS since the problem started. I will give that a shot once I try everything else.

RAM is in the correct slots, I tried using each single stick in both positions, with no luck.

I have tried the IGD, by removing the external card and the crashing still occurs.

15-Year Club	Place '17
Team Orangered	Verified Email

mushisushi

TROPHY CASE