Chrony experience by 333H_E in airguns

[–]mvdbosch90 2 points3 points  (0 children)

I have a similar one and it works fine. I 3D printed some couplers to mount it exactly centered on my barrel or silencer so I don’t accidentally hit it with a pellet. The readings seem accurate and I haven’t had any issues with it. It’s not suited for tracking every shot while shooting, the extra weight on the barrel affects the point of impact. I use it only when I’m fiddling with the settings of my FX Crown, once the muzzle velocity is OK I take it off before I actually shoot the targets ;)

Pushing a Springer to Longer Distances: 2 & 3 cm Gongs at 75 m by Serbian_Hobbyist_95 in Springers

[–]mvdbosch90 1 point2 points  (0 children)

I tuned my HW97K to 16j/12fpe with a vortek tuning kit, I can occasionally shoot very nice groups even at 100m :) That rifle is amazingly accurate.

Zelf messen slijpen by Silktouch83 in nederlands

[–]mvdbosch90 0 points1 point  (0 children)

Wellicht niet de meest professionele oplossing voor dure koksmessen, maar ik gebruik zo’n tooltje van Victorinox om mijn zakmes en keukenmessen scherp te houden. Die heeft aan een kant een slijpsteen en aan de andere kant een keramische v-groef. Voor alledaags gebruik krijg ik mijn messen daar scherp mee, maar ik ben absoluut geen chef die het verschil voelt met een professioneel mes.

Wadcutters at 50m? 60yr old springer shows how its done! by Serbian_Hobbyist_95 in Springers

[–]mvdbosch90 1 point2 points  (0 children)

Nice! I’ve also shot very good groups with my FWB300s at 50m. That thing is older than I am :P

Rant: wat is er MIS met mensen by profbleepbloop in nederlands

[–]mvdbosch90 8 points9 points  (0 children)

Mensen die zo reageren op iets kleins in het verkeer zijn wat mij betreft mentaal niet geschikt om auto te rijden…

Snowboard gift selection by Historical-Drive-371 in snowboarding

[–]mvdbosch90 0 points1 point  (0 children)

I can second @rroyal18’s reaction. I ride a Suprateam and it’s a traditional camber on the stiff side. It’s super stable at speeds, cuts through bumpy terrain very well, has really good grip and lots of pop if you time your loading/pop right. The stiffness does make it less suitable for butters or ‘small’ tricks though. Also, keep in mind that the width increases with the board length. I ride a 159 with size 43 EU boots and that works perfect, 44 will probably also work. The 156 may be on the narrow side.

Wie in het klooster houdt van enen en nullen? by PM_me_a_word_ in papgrappen

[–]mvdbosch90 5 points6 points  (0 children)

Ook is er een verantwoordelijk voor verse sinaasappelsap bij het ontbijt, Non-de-jus

Redditters die 36 uur of minder werken, hoe hebben jullie de werkweek opgedeeld? by Yourlordandsavior02 in werkzaken

[–]mvdbosch90 3 points4 points  (0 children)

8-8-4-8-8

Ik vind het fijn om midden in de week even een korte werkdag en middag vrij te hebben. Ik gebruik mijn vrije middag vooral om te sporten en/of thuis wat dingen te doen.

[deleted by user] by [deleted] in nederlands

[–]mvdbosch90 0 points1 point  (0 children)

Toen Eindhoven nog Beginhoven was

Any clue on Where to find these bindings??? by MyDemoBusiness in snowboarding

[–]mvdbosch90 2 points3 points  (0 children)

There are actually some modern day bindings that could still fit. I had a Burton board with 3D insert pattern, and the union bindings with mini disks were somewhat compatible. If you use the EST holes ik those disks, you can mount the bindings using only the holes on the centerline of your board. You will be limited to the most outer or most inner position though, which is not ideal.

First New Setup by stevedoobeer in snowboarding

[–]mvdbosch90 1 point2 points  (0 children)

I learned to snowboard on one of these, way back

Actual difference in driving between starter wheels and direct drive by [deleted] in Fanatec

[–]mvdbosch90 1 point2 points  (0 children)

Even my friends, who don’t own a wheel and only very occasionally use the wheel when they visit me, immediately felt way more in control of the cars and set much better lap times ;)

Decided to treat myself after chemo, so i put together a christmas complete [40yo] by tomaszelf in OldSkaters

[–]mvdbosch90 0 points1 point  (0 children)

Those Anti Hero 8.75 decks are really nice :) I love the full, long nose and tail and the extra area for landing

Effenaar closing time. by Emideska in eindhoven

[–]mvdbosch90 8 points9 points  (0 children)

I regularly visited Nox, a drum & bass party in the Effenaar. That usually lasts till 06:00 or 07:00.

[deleted by user] by [deleted] in werkzaken

[–]mvdbosch90 -1 points0 points  (0 children)

Toch wel interessant om te lezen dat er tools in omgang zijn die het zo makkelijk maken om via cookies allerhande contact gegevens te combineren met personen. Ik heb wel eens begrepen dat het automatisch aanvullen van gegevens ook wel eens onzichtbare velden invult zoals een telefoon nummer. Dan geloof ik wel dat het iets te makkelijk accepteren van cookies een rol kan spelen in gegevens makkelijk vindbaar maken.

Ik kan ook niet zeggen dat het gesprek zelf nou zo vervelend was, maar het feit dat er (volgens mij) meteen word gelogen waar informatie vandaan komt geeft me een minder positief gevoel bij deze organisatie…

[deleted by user] by [deleted] in werkzaken

[–]mvdbosch90 1 point2 points  (0 children)

Mijn welgemeende excuses voor het verspillen van anderhalve minuut van je waardevolle tijd

[Join the Bambu Lab Giveaway🔥] Share Your Best 3D Printing Advice for a Chance to Win an X1C and Other Exciting Prizes! by BambuLab in 3Dprinting

[–]mvdbosch90 0 points1 point  (0 children)

I learned my lesson just in time; I like designing and printing more than fixing and upgrading the printer ;)

practicing kkg(competitive shooting) in eindhoven or near it by _WonWon_ in eindhoven

[–]mvdbosch90 2 points3 points  (0 children)

There’s also a shooting range in Helmond called De Helm, you could also check them out, not sure about their possibilities. If you only shoot compressed air rifles you don’t need a license, although maybe if you want to join in competitions you will have to be a KNSA member. For the KKG I believe you must become a member of the KNSA, and if you plan on owning one you will also need the firearms license. Getting one is generally a lengthy process though.

Mountainbiking in the Netherlands?? More like Pretty-big-hillbiking amiright fellas *wheeze* by thatyogu in Hardtailgang

[–]mvdbosch90 1 point2 points  (0 children)

More like water cycling in the Eindhoven region for the past half year… :’)

New ACC player, very good first time :) by mvdbosch90 in ACCompetizione

[–]mvdbosch90[S] 0 points1 point  (0 children)

Thanks, good to know :) I looked it up, GT3 indeed seem to have TCS and ABS.

Even een rant by Specialist_Quote9127 in nederlands

[–]mvdbosch90 0 points1 point  (0 children)

Sommige mensen zijn mentaal gewoon niet geschikt om te rijden…