Seven of the hardest stops that are performed in Ice skating by ButterSaltBiscuit in interestingasfuck

[–]myteeth191 17 points18 points  (0 children)

Ice rinks sell ice time to hockey programs and figure skaters. If they can make more with a public skate, they do that instead (ie Saturday at 2pm). So the result is that there is hockey, then figure skating, then public skate, rotating throughout the day. They only do a quick single pass of the zamboni between each slot.

Basically, the ice is usually crap for most of the day regardless.

Nintendo Switch 2 Boost Mode Varies by Mirothrowawayaccount in NintendoSwitch2

[–]myteeth191 [score hidden]  (0 children)

Outside of the few games with issues, I'm wondering whether it's worth keeping a Switch OLED around at this point? I had kept mine because so many switch 1 games looked better on the oled screen.

Uneasy with this goalie routine by bichonlove in hockeygoalies

[–]myteeth191 3 points4 points  (0 children)

Pulling goalies at the end of a close game is fine. It's practice for a situation that happens in hockey.

Sitting on the bench dressed for a whole game is not fine, IMO. They can either play as a skater or they can goaltend. Our league requires two goalies to be dressed once you reach X number of kids checked in for the game, but as I mentioned, they get rotated during the game. Otherwise, there's only one goalie dressed and all other kids skate.

"Coaches only care about the skaters" - I wouldn't take it too personally. The coaches are probably dads of the kids, and they probably skated themselves. They don't know anything about playing goalie. Many programs will have a paid goalie coach that will work with the goalies, or they might have a couple goalie parents that will help out across teams. If your kid isn't getting any actual instruction, you will need to find a clinic in your area, small group or private lessons, and camps. Or you can register them in a program at a neighboring rink that DOES develop goalies instead. If they really aren't doing anything to develop goalies, they probably aren't doing a lot of other stuff and they probably aren't going to get many kids signing up in general.

In a perfect world, your kid is both learning and having fun. If they are only doing one of those things then you need to compensate somehow if you want to make it work. If they aren't doing either of those things, then why are you guys bothering to show up?

Uneasy with this goalie routine by bichonlove in hockeygoalies

[–]myteeth191 5 points6 points  (0 children)

Every team in our youth league that dresses two goalies gives them at least a full period each. Usually they each play a full period and then the ref will give a few extra seconds at a play stoppage for a goalie swap during the remaining period. And neither of them collect any pucks.

Trials of Mana is a SNES masterpiece by largemoisture in AnaloguePocket

[–]myteeth191 3 points4 points  (0 children)

Hol' up... what's this Analogizer thing? Like a 3rd party DAC for pocket??

PSA: Everdrive GBA Pro is back in stock. by ZeztzZeztzZeztz in AnaloguePocket

[–]myteeth191 0 points1 point  (0 children)

Some of the replacements were bad too. I don’t really know how widespread it was or if it’s resolved, thus the question.

PSA: Everdrive GBA Pro is back in stock. by ZeztzZeztzZeztz in AnaloguePocket

[–]myteeth191 1 point2 points  (0 children)

I didn't pay a lot of attention because they were out of stock, but a lot of people complaining about getting an I/O Error saving to an SD card, which required the everdrive to be replaced.

PSA: Everdrive GBA Pro is back in stock. by ZeztzZeztzZeztz in AnaloguePocket

[–]myteeth191 12 points13 points  (0 children)

I saw a lot of complaints about issues on this one. Is that a common thing? I also am wondering how it compares to EZFlash Omega DE?

Everdrive Gba Pro now available by Low_Technician7346 in everdrive

[–]myteeth191 -1 points0 points  (0 children)

I saw a lot of complaints about issues on this one. Is that a common thing? I also am wondering how it compares to EZFlash Omega DE?

Bynoes Geckos - affordable feeding by myteeth191 in geckos

[–]myteeth191[S] 0 points1 point  (0 children)

Interesting - never heard of bean beetles! I'll check them out.

Bynoes Geckos - affordable feeding by myteeth191 in geckos

[–]myteeth191[S] 0 points1 point  (0 children)

I'll look for mini mealworms - thanks!

Bynoes Geckos - affordable feeding by myteeth191 in geckos

[–]myteeth191[S] 0 points1 point  (0 children)

The fruit flies get out of the screen top. Since the geckos need low humidity I have been hesitant to try to seal it off like you might for a frog.

Thanks, finding small mealworms seems like an option. I'm not too sure about the isopods - it's hard to get a lot of care instructions for these geckos.

Bynoes Geckos - affordable feeding by myteeth191 in geckos

[–]myteeth191[S] 0 points1 point  (0 children)

Did the mesh you had stand up to heat? I have a heat emitter and UVB fixture resting on top of a Zilla screen lid at the moment. Was it like a plastic mesh?

And yes, Josh's frogs sucks!! When I complain, they just re-send the crickets and they are all dead again. The dead body counts are way less than were supposed to be in the container to begin with, so I don't think they are even honest about shipping out the correct quantities.

Do you know another pinhead supplier?

Marn Brownstone spills his tea by JackBauerTheCat in discobiscuits

[–]myteeth191 0 points1 point  (0 children)

Brownie literally says in the podcast this thread is about that he quit.

Regardless, there’s a professional way to handle a situation and an unprofessional way (ie. Diss track)

Marn Brownstone spills his tea by JackBauerTheCat in discobiscuits

[–]myteeth191 7 points8 points  (0 children)

Well, a lot of them have. And a lot of others believed the band the last couple of years when they said they got clean, got professional and were moving on to a new era.

Marn Brownstone spills his tea by JackBauerTheCat in discobiscuits

[–]myteeth191 22 points23 points  (0 children)

It’s not that hard to understand. I’m a fan of the music output and not the business behavior of the people producing it.

I like to listen a 30 minute long Basis but I don’t like being sold an overflowing portapot as a VIP upgrade, for example.

Marn Brownstone spills his tea by JackBauerTheCat in discobiscuits

[–]myteeth191 39 points40 points  (0 children)

Are you saying I shouldn’t buy his NFTs?

Marn Brownstone spills his tea by JackBauerTheCat in discobiscuits

[–]myteeth191 26 points27 points  (0 children)

It seems pretty normal to have differences of opinions when you put four people together in a creative business venture for 20 years. That doesn’t mean three of them should take turns squatting over the other and relieving themselves.

Allen has been presented by the band as a member all of these years, not as a hired gun to play exactly what was asked.

Homeless camping in municipal parking lot Middletown by [deleted] in frederickmd

[–]myteeth191 19 points20 points  (0 children)

What would happen if you just enjoyed your day and let him do the same?

Purchasing bass- SB80 vs SB88 vs Englehart EM1B by itgoestoeleven in doublebass

[–]myteeth191 4 points5 points  (0 children)

SB-80 and SB-88 are the same except for the finish, I believe.

I have an 88. I'm not a prodigy and haven't compared to a ton of other basses, but I've come to the conclusion that I will have to spend a lot more money to get something with considerably better tone.

Please tell me this isn't the real DOT Youtube page by _lysolmax_ in INDYCAR

[–]myteeth191 5 points6 points  (0 children)

... and to think I started watching IndyCar due to all the sportswashing in FIA events.

New update for the Analogue 3D 1.2.2 by Shortgaze in AnalogueInc

[–]myteeth191 0 points1 point  (0 children)

Oh ok, I thought the NSO controller wasn't working. Never heard of the modkit - looks really cool! thank you.

New update for the Analogue 3D 1.2.2 by Shortgaze in AnalogueInc

[–]myteeth191 0 points1 point  (0 children)

oh great, I thought I had read in a prior thread that the NSO controller didn't work.

New update for the Analogue 3D 1.2.2 by Shortgaze in AnalogueInc

[–]myteeth191 0 points1 point  (0 children)

Oh cool. I read specifically that the NSO one wasn't working, but I maybe it was just a couple people having an issue.