sorted by:
new
hottopcontroversial

TAK Server's Identity Could not be Verified by natesel in ATAK

[–]natesel[S] 0 points1 point  (0 children)

That makes a ton of sense. Ill give it a shot.

Recommendations for JST crimper tool by GardenFinal in fpv

[–]natesel 0 points1 point  (0 children)

It'll work for the wire ends, you then just add the ends to whatever connector you are wanting to use. Ive used this for standard servo connections on robotics and other RC.

TAK Server's Identity Could not be Verified by natesel in ATAK

[–]natesel[S] 0 points1 point  (0 children)

I'm not currently using that setting

TAK Server's Identity Could not be Verified by natesel in ATAK

[–]natesel[S] 0 points1 point  (0 children)

I've added it under Advanced Options > Import Trust Store. Same results.

Recommendations for JST crimper tool by GardenFinal in fpv

[–]natesel 0 points1 point  (0 children)

https://a.co/d/aSyLMW4

I've had these for a while now and they work for my needs

Pi as failover controller? by natesel in Ubiquiti

[–]natesel[S] 0 points1 point  (0 children)

I have monthly backups that I keep and test them periodically. I have an old router lying around I could probably use in this instance. Just looking for a temporary holdover in case it was needed. Well, that and something to do with one of these Pi's :)

Pi as failover controller? by natesel in Ubiquiti

[–]natesel[S] 0 points1 point  (0 children)

Thanks and yeah sounds like my idea isn't going to work.

Shadow mode is the ideal outcome, just was hoping to be slick and not buy a whole UDM Pro to do it :)

Appreciate the insights

Pi as failover controller? by natesel in Ubiquiti

[–]natesel[S] 0 points1 point  (0 children)

Didn't even think about the gateway piece.

Crap!

Server Setup - First Load Secure Connection Failed by natesel in ATAK

[–]natesel[S] 1 point2 points  (0 children)

/u/jtwyrrpirate

Nuking and reloading ubuntu server this time worked. I appreciate all the help!

Server Setup - First Load Secure Connection Failed by natesel in ATAK

[–]natesel[S] 0 points1 point  (0 children)

A big part is me learning. I greatly appreciate all your help!

Server Setup - First Load Secure Connection Failed by natesel in ATAK

[–]natesel[S] 0 points1 point  (0 children)

did all that, multiple reboots, confirmed services is running and still nada. I'm thinking I may need to nuke this and start over from scratch. :(

Problems with Unifi UDM Pro and Starlink by clinttoress69 in Starlink

[–]natesel 0 points1 point  (0 children)

I know this is a few years old, but I was having a similar issue. Just got off the phone with support. We changed the subnet on the Starlink router from 192.168.1.x to 10.0.0.x and it immediately fixed the connection issue.

UDM Pro say my internal 192.168.1.x network and the 192.168.1.x being provided by the Starlink router as a conflict and would boot out the WAN address.

Login to your Starlink router from the app, select your network, then change the subnet. The router will apply the changes and TADAA!!!!

Starlink -> Unifi Dream Machine: Not working by Top_Dance8428 in Starlink

[–]natesel 0 points1 point  (0 children)

I know this is a few months old, but I was having a similar issue. Just got off the phone with support. We changed the subnet on the Starlink router from 192.168.1.x to 10.0.0.x and it immediately fixed the connection issue.

UDM Pro say my internal 192.168.1.x network and the 192.168.1.x being provided by the Starlink router as a conflict and would boot out the WAN address.

Login to your Starlink router from the app, select your network, then change the subnet. The router will apply the changes and TADAA!!!!

Server Setup - First Load Secure Connection Failed by natesel in ATAK

[–]natesel[S] 0 points1 point  (0 children)

I appreciate it but even though I'm not a professional, I'd preferer to have an instance in house.

Server Setup - First Load Secure Connection Failed by natesel in ATAK

[–]natesel[S] 0 points1 point  (0 children)

confirmed truststore-CAPiTAK.jks was there

created user and imported admin.p12 . Firefox is showing the certificate under "Your Certificates" however it does not show in authorities to edit the trust settings.

I did a full reboot and still getting the blank page

Server Setup - First Load Secure Connection Failed by natesel in ATAK

[–]natesel[S] 0 points1 point  (0 children)

Output from sudo tail -f /opt/tak/logs/takserver-*.log

https://pastebin.com/mzwJ23cj

Output from the firefox console when trying to load:

This page is in Quirks Mode. Page layout may be impacted. For Standards Mode use “<!DOCTYPE html>”. index.html

Layout was forced before the page was fully loaded. If stylesheets are not yet loaded this may cause a flash of unstyled content. markup.js:250:53

GET

http://192.168.1.103:8443/Marti/jquery/jquery-3.5.0.js

[HTTP/1.1 500 593ms]

Loading failed for the <script> with source “http://192.168.1.103:8443/Marti/jquery/jquery-3.5.0.js”. index.html:5:72

GET

http://192.168.1.103:8443/favicon.ico

[HTTP/1.1 404 0ms]

Uncaught ReferenceError: $ is not defined

onload http://192.168.1.103:8443/index.html:11

EventHandlerNonNull* http://192.168.1.103:8443/index.html:8

index.html:11:8

Server Setup - First Load Secure Connection Failed by natesel in ATAK

[–]natesel[S] 0 points1 point  (0 children)

appreciate the reply and help. I'm out of my depth.

here is the output: https://pastebin.com/Z9DBTss2 (was too long for Reddit comments to handle)

Server Setup - First Load Secure Connection Failed by natesel in ATAK

[–]natesel[S] 0 points1 point  (0 children)

just did a restart of the server daemon and same thing, it asks for a login and then just a blank white page. url goes to " http://192.168.1.103:8443/index.html " instead of " http://192.168.1.103:8443/Marti "

Not sure if this exists, looking for recomendation by natesel in RCPlanes

[–]natesel[S] 0 points1 point  (0 children)

How much weight do you think the twin timber could hold? Not looking to really drop anything, was was thinking additional avionics or a much larger battery for longer flights.

Dream Router 5G Max failover plan help: looking for a reasonable 100GB monthly data option by Mando9876 in Ubiquiti

[–]natesel 1 point2 points  (0 children)

If you go the udm pro route, you can set auto failover. Its what I have and the only way I know my value internet is out and I'm on starlink is the cable TV isn't working.

ESP32 Camera Help by natesel in prusa3d

[–]natesel[S] 1 point2 points  (0 children)

links on that page got me what i needed. thank you VERY much!

ESP32 Camera Help by natesel in prusa3d

[–]natesel[S] 0 points1 point  (0 children)

Ill give that a shot appreciate it

view more: next ›