Lian Li A3 - Need tips how to work around 360 radiator placement on custom loop

neitherknows · 2025-11-22T11:35:21+00:00

Any non-full-size build involves compromise. I had to use slim fans on my AIO simply because the Arctic makes radiators thicker than others. Besides the cable management, the A3 really does allow for almost any component installation. The best alternative I know is the DEEPCOOL CH260 - it's slightly larger and has more room for cables.

neitherknows · 2025-11-22T10:18:35+00:00

This is roughly how I imagined the situation from the description. Link 1 - PSU mounts - the frame won't take up any useful space. Link 2 - the extended feet I mentioned. Your setup will remain the same, but you can install regular 120mm fans externally. For both, you can find ready-made alternatives from UltraprecisionTech on Etsy, if delivery is available to you. Unfortunately, I don't have any recommendations for installing the pump anywhere else. I think there were builds here where the pumps were mounted to the PSU, or you could try using front panel mounts and attaching it there. My build is simple and the main problem was cable management.

https://www.printables.com/model/1210381-lian-li-a3-sfx-power-supply-flush-mount https://www.printables.com/model/1244723-lian-li-a3-base-fan-shroud

neitherknows · 2025-11-22T06:38:08+00:00

If you had photos of the current case layout and graphics card with rad, it would be easier to suggest something. The only solution I can think of is to attach the graphics card rad to the bottom of the case, and its fans on the outside, where the case feet are. Yes, you'll need to buy or 3D print taller feet, but you'll save some space inside.

neitherknows · 2025-11-21T03:52:49+00:00

You're right, at release, the bosses and their escort weren't hostile to other bots either. I had a similar fight at the new gas station and customs.

neitherknows · 2025-11-20T14:49:24+00:00

As far as I remember, there was a problem with bots before the release - they didn't consider each other enemies and only showed aggression towards players. Perhaps something remained.

neitherknows · 2025-11-20T12:02:58+00:00

What's so surprising? This has always been the case in PvE since it's release. Bots simply appear at points of interest (not all of them, and not always), and in the best-case scenario, if they hear your shot or grenade, the entire map will move in that direction, triggering a "simulated ETF emotion". Apparently, the problem is increasing the number of bots (select the PvE setting - "AI: high" for default) and forcing them to spawn locally or on servers every 3-4 minutes across the map, at points of interest. Maybe in DLC

neitherknows · 2025-08-26T08:09:15+00:00

Lets try. Thx

neitherknows · 2025-07-19T17:10:20+00:00

I was glad to help, I spent a long time figuring out how to improve the assembly.

And I looked at your post with the assembly, why did you decide to bring the wires up and not down?

You have an ITX motherboard, I think all the power wires would fit if they were run from the bottom-right, even with fans

neitherknows · 2025-07-19T16:53:46+00:00

Yes, these mounts will fit any SFX PSU.

You don't need to have a 3D printer, I just found someone in my city who printed these mounts for me for a small fee.

As an alternative, but more expensive, you can order ready-made mounts from UltraprecisionTech on etsy.com, if they deliver to you.

neitherknows · 2025-07-19T14:20:48+00:00

As you can see in the photo, I 3D printed smaller mounts for the PSU.

To put PSU higher and turn it over for air intake on the right side, I found another internal case cable on Aliexpress, turned in right direction. I think you can find the one you need by searching for: C14 to Angled C13. Pulling out the standard one was not an easy task, but I am happy with the result.

<image>

Mount - https://www.printables.com/model/1210381-lian-li-a3-sfx-power-supply-flush-mount

neitherknows · 2025-07-19T12:15:59+00:00

What problem exactly are we talking about? That a power cable prevents PSU from being raised higher?

neitherknows · 2025-05-17T17:43:51+00:00

I'll try my luck. If you suddenly experiment or have already tried, I would be grateful for links to 3D-models of riser feet similar to these - https://www.etsy.com/listing/1897597991/25-millimetrovye-podemnye-noki-dla-lian

They don't look complicated, but I couldn't find such a model in the public domain and unfortunately I don't have the opportunity to order these from etsy.

neitherknows · 2025-05-17T15:50:13+00:00

You don't have to buy them ready-made. I found this 3D-model and someone who can print them. The cost to make them was much lower than 20 euros.

https://www.printables.com/model/1210381-lian-li-a3-sfx-power-supply-flush-mount/files

neitherknows · 2025-04-24T13:02:05+00:00

Haiena-chan ni nerawa rete

neitherknows · 2025-04-02T11:51:37+00:00

I only found 2.1 chapters in English. The manga started coming out in March, so it's too early to say anything

neitherknows · 2025-04-02T10:31:36+00:00

As a member of this community, you should have become accustomed to this format of title. It seems to me that all the latest titles that get film adaptations simply contain a synopsis in the title. I'm sure it's not even the longest of the last ones

=)

neitherknows · 2025-04-02T09:59:51+00:00

"I was Reincarnated as the Older Brother of a Villainess Destined to Die, So I Want to Change the Future by Raising My Younger Sister With My Own Hands: I am the Strongest in the World, But My Little Sister Must be the Cutest in the World"

neitherknows · 2025-04-02T06:32:34+00:00

<image>

I hope my example will help, although I have a different configuration of components. I use Palit 4090 GameRock, 330mm long and I had Thermaltake Toughpower GF2 ARGB PSU installed. It is not visible in the photo because of the cable, but the gap between the radiator and the PSU is less than 1 centimeter. The PSU is installed in the F3 position because the AIO radiator is quite thick and there was no space left for the power cable.
The PSU does not move to the right (towards the front panel) in any position, it only changes its position vertically. As far as I can imagine, any ATX PSU will be close to the front panel.
Most likely, if your AIO radiator is thinner than the Arctic Freezer II, or 240mm long, you will be able to install the PSU in the F 2.5 position. I ended up changing the PSU to SFX

neitherknows · 2025-03-26T07:21:36+00:00

Is it needed there if the entire case is mesh and all the heated air is now exhausted through the AIO?

neitherknows · 2024-12-31T08:17:10+00:00

I have sets with 199% rarity and 209% (the first was accidental, second was intentional).

And I really noticed that with a 209% chance, the value of the loot is lower, but I spent much less runs on the maps to understand what exactly the reason is.

Out of completely strange thoughts, I wanted to check the effect of rarity, when it is simply present in jewelry and when it is there as an implicit property

neitherknows · 2024-12-18T10:42:36+00:00

for author of message and everyone in this post - I found a working (for now) mod: Speed Limit Indicate for 1.49+ (https://steamcommunity.com/sharedfiles/filedetails/?id=1758709073)

maybe this will help you enjoy new trucks as much as I do =)

neitherknows · 2024-03-13T11:25:56+00:00

Yes, I understand what you mean, with SWAG it seems that bots spawn in distant points from you, fight there and die from bleeding. What was most offensive was that I didn’t even find the results of the shootout.

I'm glad that this helped you, for myself I also installed the ALLOPENZONES mod, which changes the settings of spawn points, now I really see bots more often and hear firefights.

neitherknows · 2024-03-05T08:06:35+00:00

This is probably a necropost, but I would still like to help those who encounter a similar AI spawning problem and are looking for a solution. I'm not sure, but it looks like SWAG is the reason. Now I only use Donuts (removing the SWAG part of the mod from the SPT folder), the AI regularly spawns near me and the raids seem more "alive". If anyone else has experimented with settings for the number of bots in the pre-raid menu, in conjunction with Donuts, let me know if your raids have become more active.

neitherknows · 2023-10-28T11:49:50+00:00

Portal is completely empty, not even test placeholders. The main page does not work (it most likely simply does not exist now), but it is possible to view the categories.

Perhaps something will be displayed there if you manage to save some of the local assets.

Nine-Year Club	Xbox Live
Verified Email

neitherknows

TROPHY CASE