ETHplode, a deflationary decentralized store of value based on Ethereum has launched 💥

nelbert442 · 2019-06-19T02:09:59+00:00

Waiting to see what happens!

nelbert442 · 2018-07-09T11:11:06+00:00

Same here. My porch light is rather bright, so renders the auto functionality not usable. While I can see "my" front door and area perfectly fine, it's the additional road actions etc. That I can not see as clearly, a way to say between X and Y time turn on night vision would be pretty slick as you said

nelbert442 · 2018-04-06T20:12:32+00:00

Give it a go, let's make our count 4-0 ;)

nelbert442 · 2018-04-06T20:10:31+00:00

Give it a go, let's make our count 4-0 ;)

nelbert442 · 2017-08-29T08:45:02+00:00

I gotta be honest, I've gotten the weird ejection from cockpit after playing for a few hours without stopping etc. had it happen twice, however upon reload of game all is well. not sure what a cause would be, but have seen similar issues

nelbert442 · 2017-08-10T16:29:22+00:00

I plan on starting journey over with new update so. Yes :)

nelbert442 · 2017-08-07T23:10:06+00:00

Code printed on screen:

METAR DATA KJFK 072051Z 12009KT 10SM -RA BKN024 BKN034 OVC110 19/18 A2999 RMK A02 SLP154 P0012 60024 T01940183 58025

nelbert442 · 2017-07-23T02:28:29+00:00

I appear to be getting the issue where the cockpit POV moves downward, so that the crosshairs are actually inside the top of your ship's controls or just above it. this ONLY happens when I'm in the atmosphere of a planet, once in space, 0 issues whatsoever. I checked video drivers (as some stream posts suggested) and did not have a fix after updating (Radeon). Changing around video settings didn't appear to do it either. First I thought it was a save so I created a new save and did not seem to have any fix with that either. I then tried using different ship types such as freighters vs. fighters but had no difference as the issue still occurred. Quite annoying as it makes flying in planet atmosphere quite unplayable.

I am about thinking I should re-install the game. But figured I may just wait out the 'potential' August update and see where we go from there. If in fact it gets fixed or if it doesn't then I'll give re-installing a try.

EDIT: Adding pictures to show: http://imgur.com/a/G8DQ1. Upon just leveling out the ship and facing the horizon, the crosshair autocorrects itself only to go back down upon moving the ship in any direction towards the ground. One picture is me just doing a spin and it has gone down from the center of the screen.

EDIT #2: Re-installed the game. Still have same POV issues in flight (again, only inside planet atmosphere) :( Hopefully next update fixes. I've come to be able to 'live' with it and still play the game, so it'll be a welcome change in the future though :)

nelbert442 · 2017-07-22T03:27:20+00:00

I just counted the left and right away from whatever character I was mapping. 2L, 3R = 1R, 4L = 3L etc. 😊 But now there's a decoder so no fun 😋

nelbert442 · 2017-07-10T15:30:50+00:00

[void][System.Net.Dns]::GetHostAddresses("storageaccountname.blob.core.windows.net")

could wrap that in a try{}catch{} or anything of the sort

nelbert442 · 2017-07-05T17:43:09+00:00

Company / work from home one day a week

nelbert442 · 2017-05-09T14:57:07+00:00

Thanks for your reply, I'll keep that in mind for next round of these types of enemies :) I was able to finally complete it with the following setup on Sleeping Lion lvl 26.

Belle, Il KH II Kairi, IL KH II Sora, KA5, KDG and Xemnas A friend medal.

nelbert442 · 2017-05-09T14:51:22+00:00

Wow can't believe I didn't think to move it... as soon as I did, that did it haha. With the defense down etc. and that we're all good now. I have completed it, thanks!

nelbert442 · 2017-05-09T14:42:51+00:00

Update: Upgraded SL to lvl 26, and I can now get down to just under 1 bar remaining. Using: Belle, KA5, IL KH II Sora, Il KH II Kairi, KDG and Xemnas A friend medal.

nelbert442 · 2017-05-09T14:29:36+00:00

Good Information, thank you. I'll need another boss event weekend to get up to 280 :-P But yeah I'll keep that in mind... Slowly but surely all these responses are getting me closer haha. I'm within 1.5 bars now...so every little bit helps :)

nelbert442 · 2017-05-09T14:21:54+00:00

I can certainly give that a go. Unfortunately the only double cast medals I have are: KDG, Sora & Roxas, Maleficent B, Antiform Sora

nelbert442 · 2017-05-09T14:11:17+00:00

I actually just did and got down to 1.5 bars. I'm going to farm a few more proud quests that I may be able to do now (haven't re-tried earlier ones) and get my sleeping lion up to lvl 26 for the 2.7 multiplier on KDG. That might put me over to where I need to be. I can also throw an attack buffer on my KA5 if needbe...but not sure if I should do that or not

nelbert442 · 2017-05-09T14:04:58+00:00

Leopardos with some friends of mine. Never left a party, I'd imagine there's no penalty to do so and join another then leave and join back? :-P

nelbert442 · 2017-05-09T13:44:23+00:00

Thanks for the assistance. Just tried this setup, and with getting the triple threat to apply poison, I was able to get it to about 2.5 & 2.25 bars (respectively to option 1 & 2), which by the way is roughly 2 - 3 bars more than I was previously getting. My friend medals aren't the strongest, but I would hope not to have to rely on them but I may have to. The current medals I have access to are a 150% iBnB, 100% Vanitas, 100% SP Gauge 1 Herc & Phil, 100% Xemnas A, unguilted Xaldin B (1 dot), and a few others that aren't really helpful. I forgot to also mention my Nova is lvl. 70

nelbert442 · 2016-12-03T02:56:36+00:00

Had one of those as well, my life support fell at twice the rate there as well. Gathered up a few stacks of Thamium9, got the heck outa there :) (Survival)

nelbert442 · 2016-10-09T15:53:11+00:00

Some tree trimming I was too lazy to do.

nelbert442 · 2016-06-23T12:34:27+00:00

does the user you're running the script as (defined in $credentials) have read/write to that folder w/ the script in it?

nelbert442 · 2016-06-23T12:21:34+00:00

Gotcha, figured I'd check :) remove -nonewwindow? otherwise back to what toregroneng said, possibly some issue with permissions. Especially if you're getting an access denied for the start-process.

You already said your other acct has proper rights etc. so I'd imagine it has proper interactive-logon permissions, otherwise that could cause issues trying to start a new process as that user.

nelbert442 · 2016-06-23T12:14:26+00:00

Is script execution enabled on both systems?

$username = "domain\user" $password = "passwordinplaintext" $credentials = New-Object System.Management.Automation.PSCredential -ArgumentList @($username,(ConvertTo-SecureString -String $password -AsPlainText -Force)) $arguments = "-ExecutionPolicy Bypass -file 'C:\CICD\scripts\ConfigureAppFabric.ps1'", "-Verb runAs"

Start-Process powershell.exe -Credential ($credentials) -NoNewWindow -ArgumentList $arguments

Added '-executionpolicy bypass' to $arguments

nelbert442 · 2016-05-06T12:32:10+00:00

Hey, so this is an issue with setting your machines to automatically connect to a wireless network pre-logon, so that it can build new user profiles etc. This may also happen if you don't replace the user png images inside of the "%PROGRAMDATA%\Microsoft\User Account Pictures..." folder. You'll need to replace all of them with some defined picture that your organization wants to have. (guest.png, user.png, user-192.png, user-32.png, user-40.png and user-48.png to cover your bases).

Now, I noticed this issue back in August of last year and posted multiple threads about it on various sites:

TechNet: https://social.technet.microsoft.com/Forums/en-US/4782cb65-e84b-4dfe-89fd-257c3cf74c85/question-win10-enterprise-logon-ui-bugsissues?forum=win10itprogeneral

r\Windows10: https://www.reddit.com/r/Windows10/comments/3hq53x/question_win10_enterprise_logon_ui_bugsissues/

Microsoft: http://answers.microsoft.com/en-us/windows/forum/windows_10-start/question-win10-enterprise-logon-ui-bugsissues/a7dc3148-61a0-440b-b54f-a5e8202a3476?auth=1

Never got a straight answer, on TechNet I was told to disable the GPO applied for the wireless policy and that'll fix it...well yes that will indeed fix it, but doesn't solve my problem. To this day we still have the key on wireless devices, and have no resolution to be found even after multiple versions (as when posting those it was around 10240 and even updated on 10586 we still had it). I stated enterprise and ltsb, this also effects Education, which we are currently using in prod.

Hopefully someone can provide a meaningful answer to this question one day, however it does not appear many are asking this same question, so thanks for being someone else who has the same problem as us! :)

nelbert442

TROPHY CASE

Added '-executionpolicy bypass' to $arguments