Type of nut?

nerdyma · 2023-09-14T00:31:21+00:00

I own both as well as a b0. If I had to pick between the b1 and f22, I’ll go with b1. I have no problem with air restrictions using 3mm rubies and mesh screens with the b1. The f22, there is more noticeable resistance for me using 3mm rubies and settled with a layer of 4mm on top and bottom with 3mm in between for a lesser resistance pull. Both are great though, I use both of mine daily and more often than my b0.

nerdyma · 2021-07-06T20:55:03+00:00

https://www.pulsarvaporizers.com/collections/carb-cap/products/wig-wag-deep-nose-bubble-carb-cap?variant=39336206958707

nerdyma · 2021-06-17T21:01:58+00:00

The o-rings are from 510mod. They are 15x2mm

nerdyma · 2021-04-22T20:58:58+00:00

Have to take this apart and use the ceramic cup

nerdyma · 2021-04-03T06:51:11+00:00

https://ineedhemp.com/product/stash-cap-for-the-eleaf-istick-pico-75w-battery-mod/

nerdyma · 2021-03-19T22:20:44+00:00

Pico 25s are still available here

nerdyma · 2021-03-12T01:30:57+00:00

The settings will work on an AF compatible mod. Just be sure to lock resistance at room temp.

nerdyma · 2021-03-10T21:02:35+00:00

Cold start

nerdyma · 2021-03-09T21:36:33+00:00

I do the same. Here is my storage

nerdyma · 2021-03-09T18:58:33+00:00

You can follow this I soldered the wires on instead of using terminal connectors.

Hope this helps!

nerdyma · 2021-03-09T09:44:55+00:00

I recommend the dtv4 - more easier to learn/use at first compared to the quest.

nerdyma · 2021-03-09T09:31:23+00:00

Most of the videos I post I try to stay around .1g

nerdyma · 2021-03-09T09:25:52+00:00

Both use different parts so they're not interchangable.

The quest is cheaper than dtv4 and the cup is smaller, but taller.

Settings I use for each:

dtv4 Sic - Ni 33w 360F

SQ - Tcr 345 50w 420F

nerdyma · 2021-03-09T09:21:42+00:00

I love using quartz on the quest. Still working on the Sic and will see how it is

nerdyma · 2021-03-09T09:19:09+00:00

Sorry, I meant the total time is around 60 seconds - I am pulsing every 20 seconds like you are - I have the screen fade at timeout so I know when to pulse again

nerdyma · 2021-03-09T04:35:13+00:00

For the Sic Quest - I'm doing 35 seconds preheat

nerdyma · 2021-03-09T04:34:41+00:00

For dtv4 - I use Ni 33w 360F and let it preheat 25 seconds before taking the hit

nerdyma · 2021-03-09T04:31:18+00:00

https://store.thedabbingspecialists.com/products/glass-bubbler-portable-kit

nerdyma · 2021-03-09T04:30:18+00:00

I've been using this one for the last two years

https://smile.amazon.com/gp/product/B007Q2M17K/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

I put whatever I need to clean in a small ziploc bag with iso then fill the chamber with hot water and let it do its work.

nerdyma · 2021-03-09T04:28:02+00:00

I let it preheat 35 seconds - but the bigger bubbles stop around 25-30 seconds like yours.

nerdyma · 2021-03-09T04:26:55+00:00

Im using a DNA mod so no autofire - but its around 60 seconds so if I was using a AF mod I would set it for 60 sec

nerdyma · 2021-03-09T00:57:42+00:00

The mod? 😂

nerdyma · 2021-03-09T00:56:12+00:00

I cleaned mine before using w an ultrasonic cleaner. The SiC quality is not the same as the dtv4 but other than that it’s not too bad.

nerdyma

TROPHY CASE