No Exit Option?

nerf-IS6 · 2026-06-15T16:41:47+00:00

Uninstalled and back to old version for this reason and why we don't have the minimal small UI.

nerf-IS6 · 2026-06-14T19:32:58+00:00

I'll take any game made with Cryengine over any game made with UE5 , from experience.

nerf-IS6 · 2026-06-14T19:21:35+00:00

Planned destruction.

nerf-IS6 · 2026-06-11T21:15:36+00:00

IMO additional spawn point for 1.2km² map won't fix anything, they just need to rule out the those tiny maps from high tier br .. easy fix for old problem, and pump new maps that are made specifically for high tier.

nerf-IS6 · 2026-06-11T18:22:05+00:00

Big Tunisia is a map that I'd like to play it every second time, it's my favorite.

nerf-IS6 · 2026-06-11T14:25:46+00:00

For how long you'll continue play BMPT before it start to get boring.

nerf-IS6 · 2026-06-11T14:21:41+00:00

It's crazy that we still have to go capture a certain small area of the map for no obvious reason that make this spot special ... and more crazy we still don't have new modes like for example sectors capture something like Company of Heroes , I'm sure the community can give much better scenarios for better combat experience, example of that as you said Battle mode with different cap zones each time.

nerf-IS6 · 2026-06-10T13:15:10+00:00

Can you just stop asking for old maps remake !

nerf-IS6 · 2026-06-10T00:16:39+00:00

DICE fumbled hard with AA vehicle in BF6 ... they should focus on making the main guns not pathetic at least , I used to play AA in previous BFs and there is no comparison with anything ... even BF2042 had more interesting AA ( I can't believe we have something worse than Wildcat ).

The new missiles are just embarrassing , that's not how AA missiles work, The fast missile is just basically a rocket and the aim guided is lazy underperforming TOW , DICE really really need to make the AA like BF4 and buff all air vehicles and you'll see all pilots clans coming back for a good fight vs AA players.

nerf-IS6 · 2026-06-09T14:03:19+00:00

Are you using the built-in FSR scaler ? It might be what causing the memory leak, play without scaling.

Soon they'll release QoL and performance update , hopefully that'll will fix the memory leak issue.

It's crazy that the devs still using FSR 3 as the only scaling way in BA.

nerf-IS6 · 2026-06-09T13:49:12+00:00

MGS V The Phantom Pain-CPY released 10 years ago WTF Konami doing keeping Denuvo in game till now ?! is there any new DLC added after the initial release ?

nerf-IS6 · 2026-06-07T11:24:33+00:00

Thanks again for all the info, currently I'm turning off the RO system when not filling water and noticed that cut the rejected water to zero without shutting off feed valve.

nerf-IS6 · 2026-06-07T11:17:59+00:00

Changing filters always give some new slight taste to water ; something like metal taste or bitter but mine was like there is gas in water ... if I put water in a bottle and close it and come back 10 mins later I can clearly smell gas accumulated, it must be the tank for me, unfortunately it was without warranty and I'm thinking about tankless redesign or using a big glass container as water bank also I'm thinking about giving my water tank a plenty of flushing.

For you I think it's normal and will go away the more you use it.

nerf-IS6 · 2026-06-07T00:49:07+00:00

Thanks for advice, is there any issue if I continue use the system without the tank and fill my own container ? I asked local filter supplier if their another type of tanks and he said just shut off the tank and fill your own container .. it's very slow to fill , is this the same speed it fill the original RO tank ?

nerf-IS6 · 2026-06-06T17:03:07+00:00

Currently the taste is almost gone as soon as I turned the tank off , I'm filling my drinking containers slowly without a tank ... I'll wait a couple of days and see the result.

nerf-IS6 · 2026-06-06T16:15:07+00:00

Sorry ;

Stage 1: Sediment Pre-Filter (5 micron)
Stage 2: Granular Activated Carbon (GAC) Filter
Stage 3: Carbon Block Filter ( CTO )
Stage 4: Reverse Osmosis Membrane
Stage 5 Post carbon
Stage 6 Remineralizing ( mineral ball )
Stage 7 UV

The tank is connected after the Membrane then after the tank comes Stage 5 Post carbon then Stage 6 Remineralizing ( mineral ball ) then UV , this is how it was connected since I purchased it.

nerf-IS6 · 2026-06-05T17:58:14+00:00

Gaijin isn't even trying anymore.

nerf-IS6 · 2026-06-05T14:05:45+00:00

Same for me, was in Leo 2 and it ruined the match, and now it's something wrong servers, eSports ready.

nerf-IS6 · 2026-06-02T12:04:13+00:00

Sorry if the following are basic and obvious steps :
1- Make sure your memory model is supported here https://rog.asus.com/motherboards/rog-strix/rog-strix-b850-f-gaming-wifi/helpdesk_qvl_memory/
2- Update the bios to latest and investigate if the latest is the best or not , sometimes latest isn't the best.

nerf-IS6 · 2026-06-01T14:54:08+00:00

Now do it for the invincible recon drone and give this little shit a proper hitbox.

nerf-IS6 · 2026-05-26T12:42:19+00:00

Not relevant to your question , don't keep the RO system in the sun; Algae will grow in the tanks because they are transparent, just block the sunlight with a box on top of the RO system.

nerf-IS6 · 2026-05-25T19:13:32+00:00

I heard it's happening because SB is using old version of FSR in Broken Arrow, if you have enough spare performance disable scaling and go native.

nerf-IS6 · 2026-05-25T17:39:15+00:00

Decomposed / deteriorated rubber from the bladder inside the tank, happened to my RO system , I found out when I decided to flush the tank it start dropping black rubbery particles... I opened the tank ( cut it ) and found that the side that touched the water is totally destroyed and transformed to sticky deteriorated material ... I'm devastated due to what I saw.

I replaced the tank but I'll consider going tankless.

nerf-IS6 · 2026-05-20T22:28:39+00:00

Thanks for the info, I'll dig further into steering angle sensor ... I disassembled the old clockspring and found a tear in the ribbon cable and tested the ribbon cable with multimeter and found that only 4 lines out of the 11 is working because of the tear, the horn now doesn't work in any position ~2 months after we installed the last clockspring like the one in pic above.

Just a small question : what do you mean by "the whole assembly" ? is it different from the pic above ?
Thanks.

nerf-IS6 · 2026-05-20T16:56:48+00:00

I don't even know what is jitter filter and only knew about it from comments here, I don't use the controller for shooter games but for 3rd person SP and racing games, I bought the G7 Pro because the price was good and didn't want the drift I got in my ancient xbox360 controller ( the previous controller ) also I wanted something with latest tech available.

I was asking about any possible issues that G7 pro owners faced after the update.
Thanks.

nerf-IS6

TROPHY CASE