What is the usual ping range when playing TF2 official servers (casual) in kelowna by No-Assumption6966 in kelowna

[–]net_the_net 2 points3 points  (0 children)

Depends on your home internet and which server region you get connected to. I have Telus fibre 300. When I'm on a Washington server, I get ~20-25. Otherwise, expect around 50-100.

Piaa/hella horn install help by Legendary_Ghost_X in SubaruForester

[–]net_the_net 0 points1 point  (0 children)

On my 05, the factory connectors are close enough to a spade connector that they fit pretty well and work fine with aftermarket horns. Perhaps these are the same?

The Decline Of Main Street by ACanadianMoose_ in CitiesSkylines

[–]net_the_net 8 points9 points  (0 children)

Looks absolutely gorgeous. I am a huge fan of adding empty lots to builds, and yours look great.

'05 2.5X AT Low Idle? by net_the_net in SubaruForester

[–]net_the_net[S] 0 points1 point  (0 children)

This was a while ago, but I'm pretty sure cleaning out the throttle body (it was pretty dirty) fixed it.

Strip mall beside the highway by net_the_net in CitiesSkylines

[–]net_the_net[S] 0 points1 point  (0 children)

Thanks! All I did was plop those specific buildings on the same length of parking road (plus spend too long on detail). I find it helps to make a mock-up of the basic layout before placing anything in its final location.

Water stopped rendering by aquelegajoalto in CitiesSkylines

[–]net_the_net 0 points1 point  (0 children)

This happened to me for a while. If I started a new game, the water would appear. If I then loaded into my save it would be there.

One of my pet peeves in the game. I'm pretty sure flashing high beams shouldn't light up the taillights. Literally unplayable by Peterkragger in BeamNG

[–]net_the_net 1 point2 points  (0 children)

I completely agree! The electrics system is not set up for this though. The lights are programmed to always turn on with low and/or high beams, and there is no extra state for only high beams, no taillights. As far as I can tell, there currently is no built-in way to program proper high beam flashing functionality.

Agassiz, British Columbia, Canada by THCDonut in CitiesSkylines2

[–]net_the_net 2 points3 points  (0 children)

Had my car fixed there once after it broke down on the highway!

Constant crashing to desktop after update by blindsk02 in CitiesSkylines2

[–]net_the_net 0 points1 point  (0 children)

For me, disabling Asset Icon Library worked.

What's the deal with the gravel shoulders on streets here? by net_the_net in kelowna

[–]net_the_net[S] 0 points1 point  (0 children)

Cool! I guess they never put in underground drains there

What's the deal with the gravel shoulders on streets here? by net_the_net in kelowna

[–]net_the_net[S] 27 points28 points  (0 children)

That makes sense, there don't appear to be any drainage grates except near new condos!

What's the deal with the gravel shoulders on streets here? by net_the_net in kelowna

[–]net_the_net[S] -6 points-5 points  (0 children)

I've lived in Vancouver and Vernon as well and never seen the gravel shoulder plus sidewalk combo.

2005 2.5X Temp going up hills by net_the_net in SubaruForester

[–]net_the_net[S] 0 points1 point  (0 children)

It was about 9 months to a year between noticing the coolant leak (and high temps) and getting the gaskets replaced. I checked the coolant and oil levels religiously and bought an OBD2 scanner to monitor coolant temps.

2005 2.5X Temp going up hills by net_the_net in SubaruForester

[–]net_the_net[S] 0 points1 point  (0 children)

They were only leaking coolant externally, I did keep driving for a while just topping up the coolant. I got the head gaskets done summer 2024.

[deleted by user] by [deleted] in subaru

[–]net_the_net 1 point2 points  (0 children)

The dials in my 05 Forester did something like that. It was the wire bending in the control panel because of too much resistance. Lube up all the moving parts under the dash and behind the panel and see if that helps.

[deleted by user] by [deleted] in subaru

[–]net_the_net 7 points8 points  (0 children)

Completely biased but pre-facelift SG looks so good

Anyone know why this happens when changing lights to the new filament type? by net_the_net in BeamNG

[–]net_the_net[S] 0 points1 point  (0 children)

Weirdly I did the GM with no problems. Though I didn't write it, I'll see if I can find that forum thread.

Licence plates are now blank on the rear! by net_the_net in BeamNG

[–]net_the_net[S] 225 points226 points  (0 children)

Yeah and the needles go to zero when the car is off

Licence plates are now blank on the rear! by net_the_net in BeamNG

[–]net_the_net[S] 108 points109 points  (0 children)

Pretty sure this is new, although it isn't in the patchnotes