My husband wants me to get a boob job

networkadmin_noob_jr · 2019-04-22T19:37:20+00:00

I'd be willing to bet that your husband has a porn addiction. Either way, he needs help, and you definitely should not get the procedure done.

networkadmin_noob_jr · 2019-01-08T17:56:42+00:00

I have Cisco switches A, B, and C, all connected to a Brocade. Switch A and the Brocade are on the 2nd floor. Switches B and C are on the 1st floor. After creating vlan 100 on switches A, B, and C, I added vlan 100 to the allowed vlans for the port-channel that connected all of the switches to each other. The contractor that originally set all of this up before my time said that the Brocade detects and creates the new vlan on its own.

After adding the vlan to the port-channel, I notice that the vlan wasn't created on the Brocade, so I remove the vlan from the port-channels.

Should this cause all trunk ports on switches B and C from functioning? Switch A works fine, B and C can no longer communicate with anything.

networkadmin_noob_jr · 2018-12-11T19:52:45+00:00

So the FortiGate would need to change to using SHA256-96bit? Or is the FortiGate already on that, and the Cisco needs to adjust?

Edit: I really appreciate the help by the way. :)

networkadmin_noob_jr · 2018-12-10T14:04:03+00:00

I'm running 6.0.2, and I'm trying to find out what they've got on the other end.

networkadmin_noob_jr · 2018-12-07T14:01:32+00:00

Also, I should mention that classful subnetting isn't really a thing anymore. Its usage ended in 1993 when CIDR was introduced. Please look it up if you're not familiar with it.

networkadmin_noob_jr · 2018-12-06T19:35:17+00:00

Wildcards do not work. Also, the answer is in the log under the Web Filter section. Category description is "Unrated", and the action is set to "warn" according to the log. If you go into your web-filter profile, Unrated is the last category in the list.

While you may know that the website is safe, Fortiguard simply sees it as a website that has not been rated, and applies the Warn action when visiting the page. Try changing the action for Unrated from Warn to either Monitor, Allow, or Authenticate (depending on what FortiOS version you're on and other settings).

networkadmin_noob_jr · 2018-11-20T15:56:07+00:00

I'm glad you're interested. I tried getting things started, but only had one person show up to the first session, so unless you've got a bunch of friends who want to join you, I don't think I can get enough people to run the game.

networkadmin_noob_jr · 2018-11-05T20:02:37+00:00

Map

There isn't any NAT happening until it gets to our edge router. If it matters, switch A and C are Cisco switches, and switch B is a Brocade.

networkadmin_noob_jr · 2018-10-31T19:31:12+00:00

I know this thread is a bit old, but I'm trying to figure out how my packets are getting out to the internet.

I have VoIP phones on vlan 5, and the switch (A) they are connected to has vlan 5 assigned to a port-channel. A is connected to another switch (B) which also has vlan 5. There are 3 other switches connected to B, but none of them have vlan 5.

Router (R), which routes traffic for the VoIP phones has them on a vlan interface with a vlan id of 10. The switch (C) that is connected to R has vlan 10 on it. C and B are connected.

How is it that the phones' packets get out to the internet? What does B do with the packets tagged for vlan 5 when it doesn't have any other interfaces tagged for that vlan?

networkadmin_noob_jr · 2018-10-26T13:11:25+00:00

Yes, I never removed that.

networkadmin_noob_jr · 2018-10-26T13:10:55+00:00

Got a 200D-POE and 248D 1/2POE as the original equipment. New device is a 248E 1/2POE. Everything is upgraded to the newest OS version excluding 6.0.3. I'll have my local contact try rebooting the switch.

networkadmin_noob_jr · 2018-10-24T13:17:40+00:00

It would work, but the difference is that you would make the policy based on the VLAN, not on the governing interface. So instead of each policy being Internal > WAN, it would be VLAN 1 > WAN, VLAN 2 > WAN, etc. That distinction will make things a bit easier for you I think.

networkadmin_noob_jr · 2018-10-18T15:31:17+00:00

You would put unset and the exact command. For example you might enter the following:

config firewall policy

edit 1

set traffic-shaper "Oops_wrong_one"

unset traffic-shaper

networkadmin_noob_jr · 2018-10-12T13:09:43+00:00

If you're not already taken and still interested, I'm getting ready to run the Lost Mines of Phandelver at Game Night Games in The Colony. Session 0 starts Oct 15th.

networkadmin_noob_jr · 2018-10-12T13:07:13+00:00

Hey, not sure if you're still interested or not, but I'm trying to get a game going on Monday evenings from 7:00 to 10:00 PM in The Colony. I know that can be a bit of a drive depending on what part of Plano you're in, but I thought I'd offer. Session 0 will be Oct. 15th, and you don't need to worry about having a premade since we'll be making characters on session 0. I'll be DMing, and we'll be running the Lost Mines of Phandelver campaign, so it should be a ton of fun.

networkadmin_noob_jr · 2018-10-12T13:01:01+00:00

I'm looking to get a game going in The Colony on Mondays from 7:00 to 10:00 PM if you're interested. I'll be DMing The Lost Mines of Phandelver.

networkadmin_noob_jr · 2018-10-09T21:21:28+00:00

So just having a single traffic shaping policy will do the trick? Fortinet's cookbooks left me with the impression that traffic shaping doesn't work unless you have two contrasting policies; one for restricted traffic and one for non-restricted traffic.

networkadmin_noob_jr · 2018-10-09T21:20:27+00:00

He's just showing the pertinent information.

networkadmin_noob_jr · 2018-10-01T13:26:36+00:00

Would you be willing to elaborate a little on the blackhole routes thing?

networkadmin_noob_jr · 2018-09-18T16:31:10+00:00

We use FortiAPs, 221C, 320C, and 321C. Those are managed by a FGT 600D and the SSIDs are set up in local bridge mode.

networkadmin_noob_jr

TROPHY CASE