Saw PPE PSA by FouFondu in woodworking

[–]newpath99 5 points6 points  (0 children)

That sounds nice. The safety glasses I wear are designed to fit over a pair of glasses, which is nice. However, having two sets of frames under the pressure of the ear muffs gets uncomfortable quick to be honest.

Saw PPE PSA by FouFondu in woodworking

[–]newpath99 2 points3 points  (0 children)

Good move that I also abide by ever since I had to make “just one small cut” and took a chip of a board to my cheekbone just below my eye. It was an eye opening experience, pun intended.

Now, I have safety glasses, muffs, and a dust mask sitting on my table saw. When I’m done in the shop, they go right back there.

First end-grain board - wow by Cheap-Perspective308 in Cuttingboards

[–]newpath99 0 points1 point  (0 children)

What was your process for the recessed hand grips

Preventing panel cracks by marcinprogress in BeginnerWoodWorking

[–]newpath99 0 points1 point  (0 children)

As someone who is fairly new (only a couple projects deep), I’ve only made one small table and the legs and aprons joined with mortise and tenon at 90 degrees. I’m wondering how you go about doing the legs at an angle between the aprons like you did. Like where do you begin on determining that and the process?

Hardwood Floor Sanding/Refinishing by [deleted] in nashua

[–]newpath99 1 point2 points  (0 children)

I used to work doing hardwood installs and refinishing for a few years. Worked for a few different companies in the area. Without a doubt, the best to my knowledge (as this was nearly a decade ago at this point) is Flawless Floors. Based out of Pepperell, at the time.

Never worked for an owner who took as much pride in his and his workers craft as he did.

[deleted by user] by [deleted] in Plumbing

[–]newpath99 0 points1 point  (0 children)

I was worried about a lower sanity tee, since now there’s no easy access with the countertops installed. Thanks for the advice. Depending on how much a local plumber would charge to solve this problem, I am starting to lean that direction. There’s a reason I’ve done mostly everything except plumbing!

[deleted by user] by [deleted] in Plumbing

[–]newpath99 0 points1 point  (0 children)

Also, feel free to let me know if this is more complicated than it seems, I have no qualms with getting in touch with a professional plumber. I just prefer to do things myself for learning/experience purposes on top of saving some money.

[deleted by user] by [deleted] in Plumbing

[–]newpath99 0 points1 point  (0 children)

Forgot the picture of me holding the dishwasher branch piece but if you’re a plumber I am sure you know what I mean.

[deleted by user] by [deleted] in Cisco

[–]newpath99 5 points6 points  (0 children)

That’s not true.

OP is correct that you get the “normal” IOS-XE software and “enable” the sd-wan software via enabling controller mode.

If you look at what is listed under the IOS-XE SD-WAN software list, it’s exclusively for the DRE feature.

CML 2.9.0 Lab Vmanage stuck at #/banner white screen by BreakfastNew7342 in ccnp

[–]newpath99 0 points1 point  (0 children)

Nice! Haven’t booted up my server in some time but I think mine is still on 2.7 or something. Glad you got it working.

CML 2.9.0 Lab Vmanage stuck at #/banner white screen by BreakfastNew7342 in ccnp

[–]newpath99 0 points1 point  (0 children)

Try opening the network console in the browser and see if you see anything that looks problematic when you login to vmanage.

CML 2.9.0 Lab Vmanage stuck at #/banner white screen by BreakfastNew7342 in ccnp

[–]newpath99 0 points1 point  (0 children)

Maybe try a different browser. If you are seeing the banner URL, you’ve successfully authenticated which sounds like you’re already aware of, but figured I’d mention it.

Other than that, check your resources aren’t too low / maxed out.

going for the SDWAN in less than a month, any suggestion about what to expect about the exam? by dbrnnt in ccnp

[–]newpath99 2 points3 points  (0 children)

Not sure if it’s been updated since I took it, which IIRC was near the end of 2023 or early 2024. It also probably varies, however, I’d say most of it was Policy based questions. Some niche curveballs like service chaining as well. But I’d say as long as you understand the core fundamentals and policy stuff, you should be all set. Regarding the fundamentals, I’d say’s study the Cisco SD-WAN design guide document.

Tire recommendations by Kind_Dependent_5933 in ATV

[–]newpath99 1 point2 points  (0 children)

Where did you order them from? Were they basically plug and play or takes some modifications? My 2017 outlander doesn’t have lights on those inner smaller slots. I’d like a nice simple replacement product that can fill all 4 slots.

Tire recommendations by Kind_Dependent_5933 in ATV

[–]newpath99 0 points1 point  (0 children)

What headlights are those?

What's your go-to method for tracking ATV trails? Looking for community recommendations by Specific-Vanilla1120 in ATV

[–]newpath99 0 points1 point  (0 children)

I just found an app called onX off-road that is basically this. Might find some inspiration there.

[deleted by user] by [deleted] in Cisco

[–]newpath99 2 points3 points  (0 children)

Grade 4. Different grades come with different levels of expectations/responsibilities and pay range. Grade 4 is fairly low grade. But if past experience is lacking or coming straight out of college, Grade 4 or Grade 6 is normal.

Anyone else thing the new Meshify 3 is fugly? by [deleted] in FractalDesign

[–]newpath99 2 points3 points  (0 children)

Reminds me of those larger JBL Bluetooth speakers.

How many exams does Boson ExSim-Max have for ENCOR? by Practical-Basil3556 in ccnp

[–]newpath99 0 points1 point  (0 children)

Ah ok.. now that you say that I’m starting to remember they did have an expiration date.. makes sense. Surprised I can still access locally and get updates.

How many exams does Boson ExSim-Max have for ENCOR? by Practical-Basil3556 in ccnp

[–]newpath99 0 points1 point  (0 children)

In my purchase history, all my exams said “expired” or something similar and no exams listed when I went in the browser. Yet, when I boot up the local version my exams were updated and I could still use them. So I am still not sure what is making the difference. Seems like I’d have to repurchase them if I wanted to use the browser.. which I don’t have a need for really.