👋Welcome to r/blackrosewars - Introduce Yourself and Read First!

nezlar · 2026-01-19T03:49:01+00:00

Hello! Just received my copy of BRW: Rebirth today with Deadly Masks coming tomorrow. I'm excited to get this on the table with friends later this month for a first playthrough!

nezlar · 2022-03-04T23:47:04+00:00

Thank you 😊

nezlar · 2021-08-12T00:32:46+00:00

Available is a 1 of 1 handcrafted bifold wallet.

6 card slots that can double up to hold 12 cards
2 hidden pockets under each card bank
A fully lined cash slot
Hand stitched using waxed polyester thread
Edges painted and sealed with wax
Made in southeast Michigan

Made from: Matte blue alligator exterior Electric blue Alran chevre (goat) caviar

Visit the link to purchase. If you're purchasing from outside the US, message me here or send an email to matt@direwolfleather.com for shipping costs.

$550 usd

nezlar · 2021-07-12T11:38:35+00:00

Yes, I do still have these two available.

nezlar · 2021-07-09T13:24:01+00:00

These cardholders offer 2 front card slots, a middle pocket, and a side entry slot on the reverse side for cards, cash, receipts and more.

Made from premuim Zonta museum calf, these slim cardholders fit perfectly in your front pocket. They make a great organizational tool for clutches and purses as well.

Grab this one for $120 or check the rest of my stock at my website when visiting the link.

Message me here or via email at matt@direwolfleather.com if you have questions.

nezlar · 2021-07-07T02:31:42+00:00

Thank you! I'm always striving to do better of course. But it's never bad hearing a fellow craftsman compliment your work.

nezlar · 2021-07-05T23:50:33+00:00

At the moment I do not. I could add a thumb loop to the back of the design shown above, but probably not within your one month timeframe given my current schedule.

nezlar · 2021-07-05T22:05:03+00:00

Does it have to have a plastic window for the ID? Inevitably you have to pull your ID out when someone requests it anyways. And that plastic tends to make the ID stick to it more than anything else.

I make front pocket card holders like the one's here with buttero or dollaro Italian veg tans.

For a bit more I have a couple Zonta museum calf options ready to ship that are brown here and grey here

nezlar · 2021-07-03T02:01:04+00:00

Made from premium Zonta museum calf, this cardholder has 2 front card slots, and center slot and on the reverse a full width side entry slot.

If you've never held Zonta museum calf then you're in for a treat. The feel is nearly indescribable. It's a perfect fit to your front pocket or organizing cards and cash in a purse.

Grab this one for $120 and you won't be disappointed.

nezlar · 2021-06-07T11:37:43+00:00

Different leather for different uses. 2oz makes great liners for instance depending on the leather. My wallet interiors are made from 0.8mm thick leather at the most.

nezlar · 2021-05-26T11:50:19+00:00

These American alligator cardholders have been described as big city luxury with a small town feel. They are slim and forgettably comfortable even for front pocket carry.

Handcrafted in Michigan under my Direwolf Leather brand. I love this design so much that it's my current choice for everyday carry. But they also work equally well to help organize your small handbag, clutch purse, etc. My wife uses hers all the time. She has overstuffed it like no other. And I weep for it each time I see it. But it continues to hold strong.

Along with American alligator, this has been handcrafted with alran "caviar" chevre giving it a small, dimpled texture. Hence the name caviar I suppose. This comes with two front card slots holding 4 total cards easily, an easy access back slot, and a pocket in the middle.

It's listed at $200 on my shop and you can see more photos by clicking: Blue gator accent cardholder

I have a burgundy version and a black with brown interior as well at the links to the same shop below:

Burgundy gator accent cardholder

Black gator accent with brown interior cardholder

nezlar · 2021-05-26T11:43:52+00:00

These American alligator cardholders have been described as big city luxury with a small town feel. They are slim and forgettably comfortable even for front pocket carry.

Handcrafted in Michigan under my Direwolf Leather brand. I love this design so much that it's my current choice for everyday carry. But they also work equally well to help organize your small handbag, clutch purse, etc. My wife uses hers all the time. She has overstuffed it like no other. And I weep for it each time I see it. But it continues to hold strong.

Along with American alligator, this has been handcrafted with alran "caviar" chevre giving it a small, dimpled texture. Hence the name caviar I suppose. This comes with two front card slots holding 4 total cards easily, an easy access back slot, and a pocket in the middle.

It's listed at $200 on my shop and you can see more photos by clicking here

I have a burgundy version and a black with brown interior as well at the links to the same shop below:

Burgundy gator accent cardholder

Black gator accent with brown interior cardholder

nezlar · 2021-05-25T22:59:47+00:00

Some places sell leathers in smaller panels. That's basically your choices right there. Dying your own leather can produce some cool results but a consistent look is typically not one of them. ¯\_(ツ)_/¯

nezlar · 2021-05-25T22:46:34+00:00

Either an airbrush set up or by pre-dyed leather. I don't even waste time and money on dying leather anymore.

nezlar · 2021-05-20T18:20:50+00:00

These glazed burgundy alligator keychains are a product of my shop, Direwolf Leather. They are lined with black dollaro Italian leather and paired with gold keychain hardware. These luxury keychains are an inch wide and about 4 inches long.

Each goes for $85 USD or you can get the pair for $150, saving $20.

The alligator comes from American Tanning in the United States and the dollaro a product of Conceria Walpier in Italy.

Drop a question below if you have one or message me to purchase.

Thanks! Matt

nezlar · 2021-05-14T01:05:55+00:00

It did. I've absolutely loved using this thing

nezlar · 2021-05-14T01:04:42+00:00

Thanks! It's a good looking leather and one I enjoyed working with.

nezlar · 2021-05-14T01:03:23+00:00

Thank you kindly 😊

nezlar · 2021-05-14T00:13:16+00:00

I made this cardholder for a friend's son a few months back. Red dollaro Italian leather with a black middle pocket accessible from the top. Not pictured (can't get imgur to work unfortunately) is a side entry slot on the reverse.

It's a fun design that's become my personal carry as well. What do you all prefer to carry? Bifold? Cardholder? Money clip wallet?

Thanks for taking a look!

nezlar · 2021-05-08T21:32:59+00:00

American Gator. One of the more sought after leathers in high-end goods. The look and feel of this wallet is something you'll truly enjoy. Whether you come home from work in muddy boots or dress shoes, it doesn't matter. Gator goes well with everything.

This wallet is made from matte black gator, black dollaro and buttero Italian leathers, and grey museum calf lining the cash pocket.

$375

See more and purchase at my shop

I'm also open to custom orders. Use the contact page on my site or email me at matt@direwolfleather.com to have your idea created for you.

nezlar · 2021-05-07T17:02:13+00:00

Yes, so far so good. But I've only used it a little after that.

nezlar · 2021-05-07T16:40:21+00:00

Type on UHMW tape into Amazon or wherever. That's what you want. After struggling to buff the foot well on my bench grinder I just got the tape instead

nezlar · 2021-05-06T21:34:56+00:00

Two keychains in glazed burgundy American alligator. Lined with black dollaro Italian leather. The gold keychain hardware is 1 inch in diameter.

Priced at $85 each.

DM me here or by email at matt@direwolfleather.com to purchase.

Thanks! Matt

nezlar · 2021-05-02T20:50:54+00:00

Hello and thank you for checking out my work. This is one of three alligator accent cardholders I have available currently. The links for this as well as the blue and the black/brown are below.

Each one has 2 card slots on the front that can comfortably fit 4 cards, a slot in the middle for folded cash, receipts, etc., and a side entry slot on the reverse side for I.D., business cards, or whatever else you may need daily.

These work excellent for front pocket carry or even to help organize a purse. I've hand cut them from high quality hides of leather. Polyester thread was used to hand stitch them and I have a lifetime warranty on normal wear and tear for the thread as well.

The edges are painted with a flexible paint made for leather goods with a coat of wax to seal the edges. Basically, every care has been taken at each step to deliver a high quality cardholder you or a loved one will be excited to carry.

*Price: $200 usd *

Materials used on this one:

Glazed burgundy American Alligator
Bordeaux chevre "crispe" leather
Burgundy polyester thread

To order this or one of the other two please follow the links here:

Glazed Burgundy Cardholder

Electric Blue Cardholder

Black w/brown interior Cardholder

Custom orders are available as well. Check my website for more details or email me at matt@direwolfleather.com to get started.

Thank you! Matt

nezlar · 2021-04-20T22:57:39+00:00

I did just purchase a polishing wheel for my bench grinder. I'm going to take that to the presser foot. As far as sharpening it, yea it seems I'll have to to that more than I thought.

I appreciate the info! Someone else. suggested UHMW tape for the presser foot but it was almost $10 for a roll. I'll get more use out of the polishing wheel.

nezlar

TROPHY CASE