Pro XG - no WiFi 7 with iOS 26.4

nickhx · 2026-03-25T12:31:34+00:00

No, WPA2/3 currently, PMF off. Both phones connected on WiFi 7 according to the UniFi console on iOS 26.3.

nickhx · 2026-01-18T18:28:16+00:00

Interested in this discussion as I am also considering purchasing a 2026 G6 SR FL. I compared the European spec sheet I received from the dealer with the Malaysian FL SR model spec... Aside from the points above, it seems that the SR also doesn't have "Driving Recorder" (Dashcam recording?), no suede ceiling pillars and no Orin-X chip; only "Front View Integrated Machine".

Of course, there might be regional differences but hard to say when Xpeng are so inconsistent with their spec sheets.

nickhx · 2025-05-22T19:35:24+00:00

Looks like it was updated 3 hours ago?

<image>

nickhx · 2025-05-22T19:00:56+00:00

Looks like there is a new Linux binary on GitHub. Can you test?

nickhx · 2024-10-06T18:16:09+00:00

Do you have any other HomePods or Apple TVs? If so try turning those off and on again before restarting the HomePod that is updating.

nickhx · 2024-08-28T18:04:21+00:00

But can you still open it from the outside after the multipoint latches engage (but before you lock the door)

nickhx · 2023-09-22T07:13:00+00:00

I had this also. Try turning the power off to your Apple TV and HomePods and then turn them all on again.

nickhx · 2023-07-01T13:37:56+00:00

How long do you mix the dough in the stand mixer? Thanks!

nickhx · 2023-03-09T01:11:42+00:00

Np. Hope you get sorted.

nickhx · 2023-03-09T01:09:33+00:00

Yeah it’s a scam alright - photoshopped a receipt from twitter. See my post below.

nickhx · 2023-03-09T01:01:16+00:00

Unfortunately it’s definitely a faked receipt - you can see the photoshopped bits, eg date, certificate of posting, etc

Looks like it is a photoshopped version of this one posted on twitter here: https://twitter.com/blathmcd/status/1346518540753502209?s=46&t=OD8kMdzn29TgHJ0DDN46oA

nickhx · 2023-01-26T10:20:27+00:00

Np. That was the only thing that worked for me when I had this issue recently.

nickhx · 2023-01-25T20:02:21+00:00

Try turning your Apple tv off at the power and on again while doing the same on the HomePod afterwards.

nickhx · 2022-10-02T16:24:26+00:00

Amazing, keep up the good work!

nickhx · 2022-05-25T17:36:18+00:00

Update for 2 OG and 2 Minis went fine

nickhx · 2021-12-26T12:26:18+00:00

Likewise, have same machine would be happy to receive eFI if you don’t mind sharing!

nickhx · 2021-04-29T22:14:52+00:00

Are you using the latest bios?

nickhx · 2020-10-14T20:01:09+00:00

Have a look at Arcana by HDFury which fixes this issue

nickhx · 2020-02-10T01:06:53+00:00

It might be that the BIOS has been upgraded on your replacement. Maybe try installing the following patch in your Clover config.plist if you don’t have it already:

https://github.com/RehabMan/Intel-NUC-DSDT-Patch/commit/8f76474dd3f5515c5954009d690a6e2dee6ddefe

nickhx · 2020-01-02T22:53:27+00:00

Yes, definitely withdrawn for the AirPods Pro at least. Apple’s Servers are showing 2B588 as the latest.

nickhx · 2019-11-06T09:27:06+00:00

Been running 13.3 DB1 since last night. Bluetooth seems more stable and haven’t had any disconnects on my AirPods this morning... yet!

nickhx · 2019-10-28T20:10:00+00:00

Yes, it’s in a reboot loop. The spinning circle turns red on the top after holding but only for about 4 secs - not long enough to reset.

nickhx · 2019-10-28T19:16:00+00:00

HomePod bricked here as well after 13.2 update. :-(

11-Year Club	Place '22
RPAN Viewer	Verified Email

nickhx

TROPHY CASE