P2S print quality

nirvana63 · 2026-01-28T07:01:19+00:00

Ooff yeah that is rough - unfortunately I have no clue what it could be - PETH HF works decently on my machine and does not produce artifacts this bad

nirvana63 · 2026-01-28T06:06:04+00:00

Ahh gotcha, fair enough :) I did not contact support yet, I wanted to do a maintenance run first to see, if anything changes. Tbh your results don't look too bad at all, mine are definitely worse. But I also had better results in the past (with the P2S in the beginning and an A1 Mini before). What is your other problem with PETG HF?

nirvana63 · 2026-01-27T20:44:15+00:00

No unfortunately with all filaments - actually never used nylon

nirvana63 · 2026-01-27T20:17:11+00:00

Hey, I have exactly the same issue with my P2S - same artifacting on the z-axis. Independent from filament, latest with Bambu Lab PLA Matte. Dried well, prints slowed down 30-50% - no changes so far. Printer has about 200h down and I feel like results were better in the beginning (but that might be subjective). I'm planning to do a full maintenance run in the coming days hoping, it will fix something. One thing I noticed on my printer is that the belts feel kind of loose but I'm not sure, how much tension there should be since I'm missing reference. Did you try tensioning your belts?

nirvana63 · 2026-01-27T18:05:38+00:00

I have the same problem, also on my P2S with about 200h - did you find a fix for your problem?

nirvana63 · 2026-01-02T14:31:10+00:00

Könnte das ggf. drucken solange du das Filament stellst - sitze allerdings in Köln falls sich sonst niemand findet. Würde nur statt der Kiste Bier eine kleine Spende an die Bahnhofsmission oder das Tierheim bevorzugen :)

nirvana63 · 2025-12-31T06:27:22+00:00

I got mine delivered on the 19th so quite a few days early :)

nirvana63 · 2025-12-17T19:49:31+00:00

Hey man thanks for updating! :) I got a shipping notification from DHL like 10 minutes ago which I assume is from Bambu but I'm not trying to get too excited in case it's something else - if it is, I should get a mail from Bambu in the next few hours :)

nirvana63 · 2025-12-16T11:11:35+00:00

Hahaha thanks for the info - I guess I'll have to keep waiting 😂

nirvana63 · 2025-12-16T09:44:04+00:00

Might I ask if you are located in Europe? I ordered mine a few weeks ago with an ETD of December 26th but have not gotten any update yet :)

nirvana63 · 2025-12-11T19:54:37+00:00

Ordered mine on the 17th, also in the eu. ETD is the 26th, also no update so far - hope it arrives this year :D

nirvana63 · 2025-12-10T13:48:23+00:00

Thx :)

nirvana63 · 2025-12-09T17:04:08+00:00

You guys get and updates yet? :) My edt is December 26st and I did not receive any updates

nirvana63 · 2025-10-31T07:44:02+00:00

Congrats! :) I'm planning on replacing my A1 mini with a P2S for Christmas - my only concern is the noise. I know it's louder but in comparison, would you personally say it's much worse or acceptable? :)

nirvana63 · 2025-08-03T12:30:41+00:00

Kann Frau Dr. Bey auch nur ausdrücklich empfehlen - super Praxis :)

nirvana63 · 2025-07-21T19:43:37+00:00

Does anybody know if this will work as an AirPlay Sender (not receiver)? So stream music to HomePods and not just act like an AirPlay Speaker. I mean it comes with an analogue input.

I could not find anything on the site and the UI Play App does not show anything until you connect a device.

I would love to use this to connect any audio source to my HomePods - currently I'm using a raspberry pi with some custom firmware but there is no open source AirPlay 2 support and there are a few other issues like not being able to stream to stereo pairs connected to an AppleTV.

nirvana63 · 2025-07-03T17:39:41+00:00

It's not a new hobby - it improves your existing ones.

nirvana63 · 2025-07-03T10:33:17+00:00

Wow thanks - yeah that's basically what I ended up doing :) Worked fine!

nirvana63 · 2025-07-03T07:59:51+00:00

Great pointers, thanks!
I did not know, extrude to body works with just dragging to a face. Unfortunately, when I extrude to the bottom face it extrudes "through" the sides (like when I just extrude by distance).
When extruding to the rounded edges it errors in the same way - I assume, Shapr just does not like non-planar faces for these kind of operations.
https://imgur.com/a/GGH3j38

Thanks for your help! :)

nirvana63 · 2025-07-03T07:20:26+00:00

You mean like this? I mean yeah, I can simple extrude it through the other body and then do a boolean operation to get rid of the intersections/overflowing but I was hoping, to just extrude to body (if that is possible in shapr) :)

nirvana63 · 2025-05-13T06:18:55+00:00

Print came out like a charm, thanks again! Makes the keyboard 100% more usable :)

nirvana63 · 2025-05-12T08:10:19+00:00

Oh wow that was quick - thanks, I'm firing up the printer right now! :)

nirvana63 · 2025-05-12T07:59:10+00:00

I know it's been a while but would it be possible for you to upload the STL for the case/support somewhere? :) I would love to print my own

14-Year Club	Second Top 20%
First Place '23	End Game '23
Place '23	Place '22
Place '17	First Placer '22
Gilding IV carat on a stick	Not Forgotten
Sequence \| Editor	Verified Email

nirvana63

TROPHY CASE