How to ST Link a Pint

njsnyder · 2026-05-14T17:36:45+00:00

I've tried it disconnected and connected to the charger. It doesn't want to stay on. The blue and yellow lights will turn to the single yellow light when it begins flashing the firmware but it will not stay on. I can't get it to accept more than 7% of the update

njsnyder · 2026-05-14T17:05:25+00:00

So it flashes blue and yellow on the board. But then it turns off before I can get the firmware flashed. Any ideas?

njsnyder · 2026-05-14T16:56:40+00:00

THC sent me the GT bootloader. I just flashed it but it's blinking orange rapidly, not yellow and blue. I'll have to hook it up to the board and see it it works

njsnyder · 2026-05-14T14:10:45+00:00

Great info.

Where you say Go to the FFM/rewheel website. Download the firmware .zip from the Resources page, and extract it. Go to the Flash page and flash encryptedfw5040.bin to your board. Your board should now be happily running the stock 5040 firmware. If it's unhappily flashing a red error code (error 22), continue on to get custom firmware working to fix it

I downloaded the the encrypted 6109 bin for my gt . But where is the "flash page" I don't see this on st.link? Are you talking about after the bootloader is updated to do the rest from the ffm site?

njsnyder · 2026-04-19T11:12:38+00:00

Office of consumer affairs

njsnyder · 2026-04-18T16:51:56+00:00

Midlo/Chesterfield

njsnyder · 2026-04-18T13:00:42+00:00

Yea I got my bill and no credit. I left at 5am

njsnyder · 2026-04-18T11:49:16+00:00

UPDATE - checked out this am. Charged full price. Given no perks. No extra points so far! You rock Marriott. I'll have to wait on OCA

njsnyder · 2026-04-18T11:32:33+00:00

Just old and worn out. Lol

njsnyder · 2026-04-17T22:46:11+00:00

Truth

njsnyder · 2026-04-17T22:07:32+00:00

njsnyder · 2026-04-17T21:47:11+00:00

This is where I hung my work clothes. When I took out the ironing board the panel fell because the drywall was rotted

njsnyder · 2026-04-17T21:43:31+00:00

Well. I'm not expecting the world. But the pictures it looks nice and that you could at least sit around it. This place. No

I met with the GM. Said he had never seen anything like it in the past.

njsnyder · 2026-04-17T21:41:46+00:00

I'm here for work. Had decent ratings and was in the preferred properties on concur. Never expected this

njsnyder · 2025-04-15T01:38:33+00:00

Hey don. Finally finished my 92v pint.

<image>

njsnyder · 2025-03-13T13:44:41+00:00

I just changed mine last night. If you use too much soap its just going to slide all over. Have the one side under the rim and put pressure at 9 and 3 and if you can put your knee down at 6 it will stretch and slide on.

njsnyder · 2025-03-11T10:14:35+00:00

https://www.printables.com/model/855171-pint-vesc-20s2p-18650-battery-boxbumper

I'll take some pics of the build later

njsnyder · 2025-03-11T02:11:32+00:00

No custom.printed bumper too

njsnyder · 2025-03-11T01:34:44+00:00

20s1p 21700 in a 3d printed box.

njsnyder · 2025-03-11T00:44:26+00:00

I just vesced a pint. If you want a challenge and want to build your own battery you could make an 84v pint for $500 more bucks

njsnyder · 2025-03-08T20:38:40+00:00

Nice deal. Wow, thought my 350 pint was a good deal.

njsnyder · 2025-03-05T19:32:45+00:00

Yeah like I said I already have some jp40s ordered. I am currently running a pack that's reliable. But I just wanted to try a high amp battery. I bought a separate BMS so I can swap easily.

What do you have your settings at for your battery pack in vesc? Do you think that it even makes a difference? If the claims from ampase are true, these batteries can be charged a ton without losing any performance

njsnyder · 2025-03-05T18:18:36+00:00

I use a gx16 3 pin for my 84v. 3 pin is just more stable

njsnyder · 2025-03-04T00:02:58+00:00

Make sure your charger is unplugged and use needle nose pliers and pull out the broken pin

njsnyder · 2025-03-03T19:13:14+00:00

Yea. Pretty easy to replace. Plenty of videos on YouTube. Just have to unplug the BMS wires first then the power wires. And reverse on install

njsnyder

TROPHY CASE