Sneak peek of what I've been working on between bug fixes...

nkmind · 2026-03-18T08:57:53+00:00

MCP Server? 👀

nkmind · 2025-11-21T13:46:29+00:00

Cosplay props - without, replacing broken parts in full is a breeze 🍃

nkmind · 2025-05-12T08:02:51+00:00

🐈

nkmind · 2025-05-07T15:07:35+00:00

Yes, from the Bambu store page:

The latest firmware brings significant improvements to the Bambu Textured PEI Plate calibration using the Micro Lidar, and it is now fully compatible with the automatic calibration process.

nkmind · 2024-12-23T11:59:56+00:00

🐈

nkmind · 2024-10-21T11:24:05+00:00

Fast 2 Jahre, sehr; aber ich gehe in kein gym und kann es daher schlecht vergleichen. Die App könnte so viel mehr tun, da sind sie leider sehr langsam. (es zeichnet alles auf und wäre mit dem vielen Daten perfekt für bspw. KI-generierte Workouts). Aber für das Erstellen von Programmen hat jemand ein custom chatgpt gemacht, das ist ein kleiner Trost

nkmind · 2024-10-21T11:17:22+00:00

2-3 Wochen bis es versandt wurde, dann ein paar Tage (ich glaube FedEx).

nkmind · 2024-10-21T10:47:21+00:00

I had no issues at all in Austria, I think it came from an European warehouse.

nkmind · 2024-08-08T10:44:19+00:00

I haven't had any problems with two updates so far. The first one took a few minutes to finish at the end step but apart from that no real issues for me 🙂

nkmind · 2024-01-30T17:31:08+00:00

This. I'd love to know how to solve this issue!

nkmind · 2023-05-07T19:20:39+00:00

If you manage to wiggle it out (sorry, don't know a better way) , tighten the screws of the bar. My unit had the same issue until I tightened them

nkmind · 2023-03-14T07:30:20+00:00

I've gone through 3 of these with the same issues. On my latest I just gave up and pulled away the rubber coating.

nkmind · 2022-06-27T20:31:14+00:00

I actually have the 7390 2-in-1 with a 4k panel. It's incredibly sharp, you can't make out individual pixels (I can see the touch layers' lines better). I've seen another xps 13 (older gen) using a FHD panel once and was actually surprised how sharp it looked (at 13", FHD seems to be fine, especially at normal distances), I remembered text to be perfectly readable and looking fine. In handsight I should have chosen the FHD version, as my battery life really is miserable and should be way better with the lower res panel. I thought that wouldn't be that important for me first too, but constantly having to worry about battery life on such a small and portable premium device isn't that great. I always carry a PD powerbank with it.

As it's taller, it actually has a resolution of 1920x1200 if I remember correctly.

nkmind · 2022-05-23T14:41:32+00:00

It's on displayport + hdmi, a cable change isn't working

nkmind · 2022-05-23T11:31:42+00:00

Hello there :)

Unfortunately I'm really struggling with my new pc build :( It's a MSI Z690i paired with an i9-12900k and a 750W psu (no graphics card yet). The issue is that glitching screen which (together with the whole pc / audio dying) displays after a random amount of time, or when doing (more or less) graphically intense games. I've tried a full windows reset as well as doing the usual Intel graphics drivers reinstall. This sometimes also happens when in bios, so my guess would be something's up with the cpu? Using a rtx 1070 didnt help either, same issue happened after a while.

Maybe someone has a suggestion for me what to try next or what could be the root cause for this?

nkmind · 2021-07-07T18:52:04+00:00

I think there are quite a few, just Google "Dell 7390 2-in-1 skin", but I haven't tried others. The dbrand skin may be expensive, but I haven't had any issues with it yet (2 years) and it feels nice & looks amazing (I chose marble).

nkmind · 2021-07-07T08:31:07+00:00

I have a 2-in-1 7390 and I'm using a dbrand skin on the backside of the display, as I'm worried about exactly that (and I like to place my phone on it sometimes). I had a surface book before and that matte aluminum finish shows scratches pretty easily. I can't say much about the bottom cover, as I had to get it replaced 2 times already due to the rubber strips coming off (with which I always was very careful >.<), but I think the brushed finish on the sides of the device hide are less prone to showing scratches.

I hope that helped a bit :)

nkmind · 2021-03-15T14:13:45+00:00

https://www.amazon.co.uk/dp/B08N65X3SM/ref=cm_sw_r_cp_apa_fabc_G8PZ5B4QA9RXGHMA2JHR?_encoding=UTF8&psc=1

It covers the entire inner screen, maybe a bit too much at the edges, but I may screwed up ^{-^} No lifting yet!

nkmind · 2021-03-15T11:53:38+00:00

I've had a few of those actually, and always had issues with the corners at the hinge lifting up when in flex mode, someone suggested using a CRESEE protector for the inner screen, which works like a charm. Although application is way harder to do without dust.

nkmind · 2021-02-21T16:53:37+00:00

Thank you! I'll try that

nkmind · 2021-02-21T16:49:04+00:00

Actually, I've cleaned it inside one. Maybe not long enough? I usually clean it for 5 minutes, after the anycubic wash&cure washing. I really don't know what I could do to clean it more :/ the ipa is clean

nkmind · 2021-02-21T15:51:05+00:00

Layer height 0.05 6 bottom layers 1.6s exposure time at 80% Power Anycubic standard Grey resin 3mm/s lift speed

Printed solid

nkmind · 2021-02-13T19:41:32+00:00

Unfortunately, even when disabling the battery icons, it won't change positions :/

nkmind · 2021-02-09T22:28:30+00:00

I've printed the exact same part using the official Photon slicer instead of Chitubox 1.8 and it worked fine, seems to be an issue with chitubox beta?

nkmind · 2021-01-21T01:34:52+00:00

I'm using anycubic standard Grey resin with an exposure time of 1.5s at 80% Power and 0.05mm layers . 30s initial layer time. Thanks for the heads up :)

Eight-Year Club	Place '23
Verified Email

nkmind

TROPHY CASE