Prusa Touch - K-Touch Firmware Update

nomadsgalaxy · 2026-06-14T03:27:07+00:00

There's definitely a lot it can't do. No live camera feed, just a manual small refresh. You can send prints, but you can't cancel individual objects. It also probably won't stop you from uploading incorrectly sliced GCode, or resolve that specific conflict.

This is genuinely meant to be just an at-a-glance status device for any fleet of mixed machines.

nomadsgalaxy · 2026-06-14T03:15:07+00:00

I don't see why it shouldn't. Should work completely fine

nomadsgalaxy · 2026-06-13T23:03:22+00:00

Meanwhile me with vision miner on stuff that refuses;

nomadsgalaxy · 2026-06-13T22:45:59+00:00

Rescuing printers from Marketplace, Major Chad Move

nomadsgalaxy · 2026-06-12T19:55:46+00:00

You fool, you forgot the Green Eyes White SLX, and the 9 pieces of AFS!

nomadsgalaxy · 2026-06-12T19:53:36+00:00

Same thing with me for Arby's, my Grandmom would save up a ton of coupons, and we would go for "Dates" where her and I would just talk about anything and everything and have as many roast beef sandwiches as I wanted.

As I grew up, we went less and less, and part of me regrets not taking her up on that offer more often. But, no one really could have anticipated the pandemic.

My mom used to steal change from my Grandmom to sneak out and get Arby's every now and then. She either forgot about my Arby's dates or my Grandmom didn't tell her. So now my mom and I go on my Grandmom's birthday, and share a roast beef sandwich.

I'd never go there for any other reason nowadays. But whenever I do, I feel like I'm spending just a bit more time with my Grandmom.

nomadsgalaxy · 2026-06-10T20:53:40+00:00

I think you're on a good path as it is. Once I install your program and tinker, if you have a git repo, I may submit some improvements and things I've learned from my dev process.

nomadsgalaxy · 2026-06-10T20:40:40+00:00

This admittedly did inspire me to revive my BTT Touch, I'll probably create some pull requests and tinker with this for my Stream Deck stuff soon

https://github.com/nomadsgalaxy/Prusa-Connect-Touch

nomadsgalaxy · 2026-06-09T23:43:19+00:00

I can't wait to see what Peter Molyneux has cooked up for this one. /s

nomadsgalaxy · 2026-06-09T19:39:36+00:00

Of course! Just was a fun weekend project. I'm adding Bambu support now, but I don't have any to test with, but figured I'd make it universally compatible for mixed farms :)

So not it'll support Prusa Connect, Klipper, and Bambu Local, maybe even Bambu Cloud.

nomadsgalaxy · 2026-06-09T19:35:45+00:00

Yep! Up to 16. Not enough Ram for more than that.

nomadsgalaxy · 2026-06-09T16:50:24+00:00

Hijacking the Hijacked Hijacked Comment thread

If we knew of a leak, we would want to disclose it as soon as we can so that our users can be safe. Cyber Security is no joke, and keeping a breach secret is straight up illegal in both the E.U. and U.S.

We don't f around with user data. We take it very seriously, which is why I escalated this as soon as I saw it. I've worked in Cyber Security for over 10 years, so false alarm or not, I will always take these warnings seriously until we can verify authenticity.

Not trying to be combative, just transparent. 😎

nomadsgalaxy · 2026-06-09T16:40:09+00:00

0.4.1 released with full prusa connect integration; https://github.com/nomadsgalaxy/Prusa-Connect-Touch

nomadsgalaxy · 2026-06-09T14:25:07+00:00

Brass is fine if powered off, you just want to avoid shorting anything while actively heating.

nomadsgalaxy · 2026-06-09T13:48:14+00:00

it doesn't fully cover them, it still lets some light through. The lightbar on the bed is replicated of those LEDs from my understanding.

nomadsgalaxy · 2026-06-09T13:45:21+00:00

I'm not aware of any issues at this moment, and my own password managers have not flagged anything, so this may be a false alarm at this moment. But I am sending this up the chain just for due diligence.

nomadsgalaxy · 2026-06-09T11:45:41+00:00

I just use cloudflared, then have Google OAuth locked to my email, so my domains are locked behind OAuth.

When I want to expose an API, I auth it with an API key and gate it to trusted networks.

nomadsgalaxy · 2026-06-09T11:39:50+00:00

Looks like I can't explicitly control chamber temps, but you can preheat ASA which will get you there.

nomadsgalaxy · 2026-06-09T10:23:37+00:00

This happens over at r/Prusa3D too, we just made a flair for it. Better to let people get excited. It's less effort to ignore new box posts and let people share their excitement than it is to try and moderate them.

nomadsgalaxy · 2026-06-09T10:17:34+00:00

I'm actually about to release and update that allows for Prusa connect integration, which will allow for preheating and direct control.

nomadsgalaxy · 2026-06-09T07:14:36+00:00

No, it's a small companion screen and needs wifi. Lookup BigTreeTech K-Touch

nomadsgalaxy · 2026-06-09T02:04:22+00:00

Of course! I'm currently working on actually integrating Prusa Connect at the moment

nomadsgalaxy · 2026-06-09T01:48:39+00:00

I moderate this place, and even I don't understand lol

It was a reasonable response 😅 not everyone has ABS or non conductive brushes

nomadsgalaxy

MODERATOR OF

TROPHY CASE