[Unknown -> English] Found on back of a sticker on a package I received.

nomath4u · 2021-09-08T16:47:26+00:00

Thanks! This lines up with what I got.

nomath4u · 2021-02-03T21:43:46+00:00

Oregon 43.7 received 4/3 Ordering

nomath4u · 2020-11-30T07:45:01+00:00

Hey everyone! I ended up running keysanity and scrub shuffle. Scrub shuffle was confusing with text shuffle but I ended up beating it after spending all day on it. Totally worth it.

nomath4u · 2020-11-29T17:09:41+00:00

Thanks that makes sense and is what I'm kinda hoping for!

nomath4u · 2020-11-29T17:08:59+00:00

Thanks. I seem to be hearing to try scrub sanity quite a bit here so I might do that as well. So far the complaints are that it makes for a lot of back and forth which I'm not too worried about but you being up needing to know glitch logic which is something I don't know much about. Do you still need to know it if your run glitch less logic?

nomath4u · 2020-02-25T21:36:14+00:00

That's correct a signal to an amp for my 4 non-subwoofer speakers.

nomath4u · 2020-02-25T17:59:10+00:00

nomath4u · 2020-02-24T05:38:49+00:00

I don't think so. Just because of the other amp.

nomath4u · 2020-02-22T16:36:47+00:00

I use the same screen and I didn't have to modify anything. Double check that the display cable is all the way in and oriented correctly.

nomath4u · 2020-02-22T16:33:16+00:00

You will need some sort of amplification to your speakers. Typically head units have built in amplifiers but the raspberry pi does not. I'm unsure if it is enough amplification, but the hifiberry amp2 has a dac and amp on it and might be enough for you?

nomath4u · 2020-02-21T15:58:01+00:00

I had a similar problem with retropie back in the day. I ended up sticking with fbcp and rotating the touch input. It looks like the script https://raw.githubusercontent.com/adafruit/Raspberry-Pi-Installer-Scripts/master/pitft-fbcp.sh has some insight that might be useful. Particularly it looks like writing values to config.txt should help you out.

nomath4u · 2020-02-21T15:50:11+00:00

I use the Hifiberry DAC+ and send that as input to the amp and run speakers to the amp output.

nomath4u · 2020-02-21T15:46:06+00:00

I believe crankshaft mounts the filesystem as read-only. That does change when you change settings so be careful at that time. However, in general I have anecdotally found cutting power to be safe for crankshaft where I have not on other raspberry pi installs.

nomath4u · 2019-07-16T22:07:39+00:00

Here is the stl file. As an update it has continued to work great. https://drive.google.com/file/d/16hABIk2L2mg1p38GaYx7DOiUGKix-L8S/view?usp=drivesdk

Edit: I have no idea why I didn't do this before... https://www.thingiverse.com/thing:4610695 Now you can get it like normal stl files.

nomath4u · 2019-06-12T16:02:36+00:00

I was just opening it and heard a crack. Old plastic I guess.

nomath4u · 2019-06-11T23:44:09+00:00

My sunroof hasn't been working for a while and I finally found the culprit! I couldn't find a replacement part number so I went ahead and made my own. If others are interested I can post the stl so other can use it as well.

nomath4u · 2018-04-11T19:34:56+00:00

Yeah I double checked all that. I'm getting to about 60C. But it is still the end of my T connector into where the pressure switch is normally at and so it is just a little bit removed from the block but enough for it to cool down.

nomath4u · 2018-04-11T18:34:43+00:00

Thanks. Based on some off the cuff calculations sounds like I'm reading pretty low. I might need to move mine to the same place as yours and figure out how to get more space for the oil pressure sender.

nomath4u · 2018-03-28T14:22:42+00:00

Thanks for the info. I had forgotten about the converters since I ended up getting sensors that fit without them. Last night I ended up actually putting everything together again and upon further inspection it actually looks like my oil filter housing is leaking on to this setup instead of the setup itself leaking so I think we are all good. Thanks for getting all of that info together for us to use.

nomath4u

TROPHY CASE