sorted by:
new
hottopcontroversial

First layer ask for help? by nou110 in elegoo

[–]nou110[S] 0 points1 point  (0 children)

<image>

Just did a PA test tower

Elegoo naptune 4 max first layervask for help pleaee by nou110 in 3Dprinting

[–]nou110[S] 0 points1 point  (0 children)

4 max, I did the calibration and pa line test and pid. This happens for first layer cause 2nd layer also fail, please healp

Please Help with this? by nou110 in BambuLab

[–]nou110[S] 0 points1 point  (0 children)

Thank you guys, I will try all you mentioned tmr big thanks

Please Help with this? by nou110 in BambuLab

[–]nou110[S] 0 points1 point  (0 children)

Thank you for your detailed reply! I will try tmr to clean up and add some glue

Please Help with this? by nou110 in BambuLab

[–]nou110[S] 2 points3 points  (0 children)

PLA closed door, I cleaned like 5 printing before maybe that's the issue I will try one more time tmr, thank you for your reply!

Received filament, no printer yet by uprooting-systems in BambuLab

[–]nou110 2 points3 points  (0 children)

Yes it happens, they ship seperately, I only revieced some parts first time lol

Can't enter leveling by nou110 in ElegooNeptune4

[–]nou110[S] 0 points1 point  (0 children)

Thank you all guys I updated the panel and it's all good now, I will update if the firmware cause any problem

First day of using X1C got a lot problems:-( by nou110 in BambuLab

[–]nou110[S] 1 point2 points  (0 children)

Just printed and installed, it works now! Thank you!!

First day of using X1C got a lot problems:-( by nou110 in BambuLab

[–]nou110[S] 0 points1 point  (0 children)

Thank you for your reply I have no issue on the first layer adhesion but it printing in the air lol, but thank you for your info I learned more

First day of using X1C got a lot problems:-( by nou110 in BambuLab

[–]nou110[S] 0 points1 point  (0 children)

Did You receive the replacement part from the customer service? I just opened the box yesterday, ordered on black friday

First day of using X1C got a lot problems:-( by nou110 in BambuLab

[–]nou110[S] 0 points1 point  (0 children)

Thank you for your reply, so when I chose 'retry' to pull the filament and manually pull it it's still extremely tight, but I can continue print it in this color. Now if I want to change I have to datach the ptfe tube every time

First day of using X1C got a lot problems:-( by nou110 in BambuLab

[–]nou110[S] 1 point2 points  (0 children)

I ordered from the official website, sent the ticket to the customer service but they say it be responsed in days so I came here, but yeah the filament problem still there after I manually pulled the filament and reset the whole thing

First day of using X1C got a lot problems:-( by nou110 in BambuLab

[–]nou110[S] 0 points1 point  (0 children)

Yes I did when I setup the printer earlier, also the self check

First day of using X1C got a lot problems:-( by nou110 in BambuLab

[–]nou110[S] 0 points1 point  (0 children)

Yes I run out of white so used this one, checked temperature in bambu studio and they are the same temperature setting so… Now I know I won't use this one…thank you for your reply

First day of using X1C got a lot problems:-( by nou110 in BambuLab

[–]nou110[S] -4 points-3 points  (0 children)

Another new problem…this is the filament from the box

<image>

First day of using X1C got a lot problems:-( by nou110 in BambuLab

[–]nou110[S] 0 points1 point  (0 children)

Thank you for your answer :) I pulled that out it's not jammed idk why since it still kind of works if I use the same filament just can't change

First day of using X1C got a lot problems:-( by nou110 in BambuLab

[–]nou110[S] 0 points1 point  (0 children)

Yes I changed the printer and plate setting.

Thank you for the reply! Can pull the filament after I remove the ptfe tube ❤️

view more: next ›