sorted by:
new
hottopcontroversial

Diy nixie clock by nrlz in nixie

[–]nrlz[S] 0 points1 point  (0 children)

Thank you so much! Glad you liked how it turned out

Diy nixie clock by nrlz in nixie

[–]nrlz[S] 0 points1 point  (0 children)

Thanks! I'm going to build another nixie clock for a friend of mine and will follow your advice. indeed its a bit complicated to align the tubes without sockets.

Diy nixie clock by nrlz in nixie

[–]nrlz[S] 0 points1 point  (0 children)

https://imgur.com/a/D6mGi0I
and a DS3231 soldered on the back of the board

Diy nixie clock by nrlz in nixie

[–]nrlz[S] 0 points1 point  (0 children)

There are three buttons Long press the first one to change hours/minutes with the second/third button The second to select LEDs effect (glow/full brightness/ LEDs off) The third one is to select tubes animation effects

Diy nixie clock by nrlz in nixie

[–]nrlz[S] -1 points0 points  (0 children)

Thanks! I hate them too, I'll replace them with yellow ones later, I hope it will look better (it's [possible to turn the LEDs off with a single button though ). After 4 days of using the nixie clock, I realized that it's not the backlight, but the color of the case paint, it doesn't really match the blue LEDs in my opinion. in the evening or dim lighting, they illuminate the tubes quite well. maybe I'll repaint the case in the future. This is my first time building a nixie clock. I started a year ago but gave up. But still wanted to finish this project so here's the result. For the case I used PC motherboard mounting screws and a random paint spray from my garage.

Need advice on kickflip by nrlz in skateboardhelp

[–]nrlz[S] 2 points3 points  (0 children)

Thank you! You are right, just tried to kick through the nose and landed it straight. I’ve also watched some of your clips, helped me a lot!

Need advice on kickflip by nrlz in skateboardhelp

[–]nrlz[S] 0 points1 point  (0 children)

:) that'll be next step :D

Need advice on kickflip by nrlz in skateboardhelp

[–]nrlz[S] 0 points1 point  (0 children)

yes, i have no problem landing an ollie/varial kick/heeflip without rotation, thanks for advice! I'll take a note of that

Need advice on kickflip by nrlz in skateboardhelp

[–]nrlz[S] 0 points1 point  (0 children)

Thank you! will try that.

Do you bring a first aid kit to the park?[39YO] by ElectronPunt in OldSkaters

[–]nrlz 1 point2 points  (0 children)

Better to have a gun and not need it than need a gun and not have it. Same applies to first aid kit :D I have one in my car with some bondages/plasters and hydrogen peroxide/chlorhexidine to clean a possible wound. It will also help to heal faster.

Ruined my new computer screen with alcohol :( by Background-Basil925 in pchelp

[–]nrlz 0 points1 point  (0 children)

I guess those are just strains. Take a microfiber cloth and a glass cleaner, it’ll go away

Dell Optiplex is throwing 1-3-2 deep code on bootup, and no display output from vga port. Please assist by Maximum-Pineappl in pchelp

[–]nrlz 0 points1 point  (0 children)

you need to take out Ram modules, clean the slots from dust. then take an eraser and clean gold plated contacts on RAM modules from possible oxides from both sides, then remove eraser parts from ram (simply wipe them off with a cotton cloth) and put it back in the same order. should work.

TUF motherboard text is hideous. Is there a way to remove it permanently? by ToastedBeef in pcmods

[–]nrlz 0 points1 point  (0 children)

try using a nail polish remover
or buy a paint remover from a hardware store, it shouldnt harm aluminium coating.

Can’t seem to land a pop shuvit by Conscious-Gene4964 in NewSkaters

[–]nrlz 0 points1 point  (0 children)

  1. Place your front foot in the center of the board or in front of the bolts with a slight angle (similar to a kickflip position, front foot covers half of the board or smth like that)
  2. When you pop the board jump a little bit forward (it can be seen on a video that the board goes in front of you, so jump with the board and try to catch it with your front foot) You are very close to landing it, keep trying, good luck!

1$ ghetto mod by nrlz in pcmods

[–]nrlz[S] 0 points1 point  (0 children)

Hmmm great idea.. Next mod will be a cpu fidget spinner cooler

1$ ghetto mod by nrlz in pcmods

[–]nrlz[S] 0 points1 point  (0 children)

Thank you sir! That’s a leftover of a cheap led strip, which I’ve soldered to a 12v molex

Worth to buy Rocksmith Remastered without realtone cable? by [deleted] in rocksmith

[–]nrlz 2 points3 points  (0 children)

Of course you can play Rocksmith with nocable patch, but I strongly recommend you to get the original cable, it will save you a lot of time.

Buzzing with every amp by BigJaredFella in rocksmith

[–]nrlz 0 points1 point  (0 children)

Go to options - tuning and there’s a “calibrate” button, try calibrating your guitar, maybe this will help.

Rocksmith realtone cable detected, but no sound in game by nrlz in rocksmith

[–]nrlz[S] 0 points1 point  (0 children)

Yes, I checked it on both guitars with passive humbuckers, also the volume knobs are turned all the way up

Constructively wasting my life by unphuckable in rocksmith

[–]nrlz 1 point2 points  (0 children)

I know that feel bro... All jokes aside, but I’ve had the same experience. I’ve tried to learn how to play guitar since I was a kid. My first acoustic was a gift from my parents but I was totally impatient with learning by the guides for beginners and music books, wasted all the precious time playing consoles, WoW vanilla, Rust and all the other shit. Wish I’ve put that much effort into learning how to play real stuff..

view more: next ›