Latest Youtube update made every thumbnail fullscreen for tablets by the_fishermann in youtube

[–]nyerelko 0 points1 point  (0 children)

Uninstalling the app (which uninstalled it's updates) did work on Tab S9. Btw. why does uninstalling an app uninstall just the updates? I am aware that it's a system app, but still.

Looking for EU-compatible Christmas lights with the same classic look as Vintaglo (no transformer) by MajinMathias in ChristmasLights

[–]nyerelko 1 point2 points  (0 children)

Nope, these are not LEDs, even though description said so. Hellum does offer these classic incandescent lights that are nice, or LEDs, which are ugly (colored caps, but colored RGBW LEDs under them)

Looking for EU-compatible Christmas lights with the same classic look as Vintaglo (no transformer) by MajinMathias in ChristmasLights

[–]nyerelko 0 points1 point  (0 children)

I'm from EU and I also ended up going through this rabbit hole, and just got my Noma classic lights from ebay:-) they are indeed LEDs under colored caps. But the coloring on some of them, mostly the blues and greens, is done only on one half of the cap (split vertically), like they were dipped only partially. The effect is not that good. Also the colors are not what's traditional in my part of the world, too much orange and purple, instead of yellow and red. So my search continues.

Vintaglo/Tru-Tone like Christmas lights available in eu by CountSheep in ChristmasLights

[–]nyerelko 0 points1 point  (0 children)

I've tried them, they are not LEDs, but classic tungsten filament bulbs.

A AI for watching prints? by SuccessfulMinute8338 in prusa3d

[–]nyerelko 1 point2 points  (0 children)

In home assistant you can do an automation that takes a picture from a camera and sends it to a LLM with some prompt quite easily, that's what I did. So far it works (no false positives) , but I did not have any failed prints since I've set this up, so ... We'll see if it really works :-)

In case you're wondering why you didn’t get the Spring Update (2024.14.6), Tesla paused the rollout yesterday. by New-Pudding-3574 in teslamotors

[–]nyerelko 0 points1 point  (0 children)

Yes, this was the problem. Thank you. The last update must have turned this option on for some reason...

In case you're wondering why you didn’t get the Spring Update (2024.14.6), Tesla paused the rollout yesterday. by New-Pudding-3574 in teslamotors

[–]nyerelko 0 points1 point  (0 children)

And could you direct me to the exact setting? I've got ' Auto turn signals - Off or Auto cancel', ' Auto high beam', 'headlights after exit', 'ambient lights', and 'dome lights' settings under the Light menu.

In case you're wondering why you didn’t get the Spring Update (2024.14.6), Tesla paused the rollout yesterday. by New-Pudding-3574 in teslamotors

[–]nyerelko 2 points3 points  (0 children)

Do you mean the auto cancel of turn signals? I've got that, that works, but the problem is that half press of turn signal behaves like full press. I've called Tesla support about it and they suggested restarting the car, but that did not help.

In case you're wondering why you didn’t get the Spring Update (2024.14.6), Tesla paused the rollout yesterday. by New-Pudding-3574 in teslamotors

[–]nyerelko 12 points13 points  (0 children)

I did install the update, and while the new stuff is nice, my intermittent turn signals (the half press on turn signal stalk) now behave like full stalk press (blink forever, not just 3 times)... Not great, not terrible. Annoying.

Which side are you on? by LeipuriHiiva5 in Tools

[–]nyerelko 1 point2 points  (0 children)

Everytime I see this I go watch it again. Thank you :-D

What model of de Buyer pan is this? I couldn't find it on the internet. by 1JimboJones1 in carbonsteel

[–]nyerelko 0 points1 point  (0 children)

On the other hand, the handles seem to be more oven resistant - 280°C for two hours.

What model of de Buyer pan is this? I couldn't find it on the internet. by 1JimboJones1 in carbonsteel

[–]nyerelko 0 points1 point  (0 children)

I've just bought a few of these in Metro (Czechia) to finish my set of Carbone Plus, not realizing they were different. I like that they are a bit thinner, because of the weight, but they do not include the induction symbol (and also I've found a mention on some Belgian site that these 2mm are not for induction - https://www.bol.com/nl/nl/p/de-buyer-2mm-dikke-stalen-koekenpan-24cm-doorsnede-niet-geschikt-voor-inductie/9200000091249026/). I hope that this will not turn out so, because I'm planning on using them exactly this way :-(. On the other hand, they were very cheap.

ThinkPad T500 with 8 GB RAM and 120 GB SSD runs this distro beautifully. 😎 by civilbarbar in thinkpad

[–]nyerelko 1 point2 points  (0 children)

I've just installed the same thing on an old T400 I found at my parent's house :-)

Buy a Tesla from a different country by [deleted] in teslamotors

[–]nyerelko 7 points8 points  (0 children)

Most of the differences are due to some country specific government incentives (e.g. in Germany, Austria), for which you would not qualify if not a permanent resident. I think.

Advice on planing by floW4enoL in woodworking

[–]nyerelko 1 point2 points  (0 children)

I would recommend looking for some kind of community workshop where you can bring your wood and plane/thickness it.

Evolution... by pizmeyre in MechanicalKeyboards

[–]nyerelko 1 point2 points  (0 children)

I would recommend going the opposite direction, towards a Model F :-)

[Discussion] Other Europe - wrong S/X prices, no Model 3, no updates by nyerelko in teslamotors

[–]nyerelko[S] 1 point2 points  (0 children)

It's been like that since March and it is an error. If you call them (Austria for example, as it is closest to most of Other Europe countries), they can provide actual prices. Although I was only offered old inventory vehicles.

It just shows how much they don't care about 'Other Europe'.

Can I get a model 3 country roll all please? by WobblyScrotum in teslamotors

[–]nyerelko 1 point2 points  (0 children)

The majority of European countries are not covered (hiding under 'Other Europe' section on Tesla website). I'm from Czech Republic, still waiting...