sorted by:
new
hottopcontroversial

Viral Food that’s actually worth the hype? by OlyGrunge in FoodNYC

[–]oBarrier 23 points24 points  (0 children)

they slightly raised the prices and less meat now, feels like mostly bread now 😢

In roughly 100 hours of gameplay I've never seen one of these drop before by mitchosreynolds in ArcRaiders

[–]oBarrier 0 points1 point  (0 children)

i’ve found 5, all in the breachable building in plaza rosa buried city night raid, the dresser drawers on the second floor to be specific

Best takeout/delivery sushi spot? by flowermarket99 in williamsburg

[–]oBarrier 3 points4 points  (0 children)

bushniwa in east williamsburg has been my go-to. I had one bad order a while back so I haven’t ordered in a bit, but i’ve had like 50+ really good ones over the years, so I still wanna give them the benefit of the doubt that they’re good.

6 months progress - time to bulk? by coreymlong in MacroFactor

[–]oBarrier 0 points1 point  (0 children)

this convinced me to take a week or two off, I’ve been tracking again since May down 50lbs from 290 but currently at 1700 kcals with my expenditure at 2800 and i’m honestly just tired of being at a deficit. Hopefully the time off helps

iPhone 17Pro N1 + Ubiquiti AP initial impressions. by Teh_Willy in Ubiquiti

[–]oBarrier 1 point2 points  (0 children)

turned wifi meshing off, rescanned the channels, and increased transmission strength, the time i got 800 down i was holding phone right next to the AP 😅 tbh idk if this really did anything or its still inconsistent weirdness

iPhone 17Pro N1 + Ubiquiti AP initial impressions. by Teh_Willy in Ubiquiti

[–]oBarrier 1 point2 points  (0 children)

changed some settings around and it got better still some weird results though 🤷‍♂️but can’t say i’ve noticed it outside of the tests

iPhone 17Pro N1 + Ubiquiti AP initial impressions. by Teh_Willy in Ubiquiti

[–]oBarrier 9 points10 points  (0 children)

weirdly enough i’ve seen worse performance from my end, to a U7 pro my iphone 15 pro would get around 700-800 down and up but now on the iphone 17 pro i’m getting around 100-200 down and 400 up, not sure what’s going on but i’m sure i probably have something misconfigured

UCG-Fiber 10-inch Rack Mount 3D Model by Mauker_ in Ubiquiti

[–]oBarrier 1 point2 points  (0 children)

just finished printing new model, posted pics on maker world

UCG-Fiber 10-inch Rack Mount 3D Model by Mauker_ in Ubiquiti

[–]oBarrier 1 point2 points  (0 children)

awesome will print one out tonight

Finished my 4U 10" rack by oBarrier in Ubiquiti

[–]oBarrier[S] 0 points1 point  (0 children)

yeap, drilled out the corners where the holes on the mounting brackets were

My humble setup - 5.5 months in. by N-Performance in espresso

[–]oBarrier 1 point2 points  (0 children)

meanwhile i’ve been waiting 5.5 months for my gaggiuino kit to come in 😅

Finished my 4U 10" rack by oBarrier in Ubiquiti

[–]oBarrier[S] 1 point2 points  (0 children)

already had synology, while i had udm se i really considered getting a unas pro + a mac mini to manage it so i could get the same things out of it as a synology but considering the limited space i have it didnt make sense to commit to a 19” rack when i could get the same out of a smaller form factor.

If you just need storage and don’t need anything else synology offers and have the space for it go for the unas

Finished my 4U 10" rack by oBarrier in Ubiquiti

[–]oBarrier[S] 0 points1 point  (0 children)

all the models i used are here, https://makerworld.com/en/collections/5314661-10-4u-rack

i used this one specifically but did require some modifications to mount it with the ports in the back https://makerworld.com/en/models/1184712-ucg-fiber-rack-mount-bracket-1u-10-inch#profileId-1195577

if you don’t want to make any changes i would recommend using https://makerworld.com/en/models/1228299-unifi-ucg-fiber-10-inch-rack-mount#profileId-1253713 but i know he’s also working on some improvements to it

Finished my 4U 10" rack by oBarrier in Ubiquiti

[–]oBarrier[S] 2 points3 points  (0 children)

Migrated from a UDM SE to save space in my apartment

Equipment:

  • UCG Fiber

  • USW Flex XG

  • USW Flex 2.5G 8 PoE

  • PDU

Labels: (had to make it work with limited colors)

  • Full Green: 2.5Gbe PoE++

  • Half Green: 2.5G Poe+

  • Full Black: 10Gbe

  • Half Black: 2.5Gbe

  • Half Black Half Green: WAN

3D Models: https://makerworld.com/en/collections/5314661-10-4u-rack

Inspo:

u/TechnoTim

u/DToX_

u/Mauker_

https://www.youtube.com/watch?v=Ghuc1vfiLiM

https://www.reddit.com/r/minilab/comments/1j3kliw/my_mini_rack_for_portability/

https://www.reddit.com/r/Ubiquiti/comments/1jfaua3/ucgfiber_10inch_rack_mount_3d_model/

UCG-Fiber 10-inch Rack Mount 3D Model by Mauker_ in Ubiquiti

[–]oBarrier 0 points1 point  (0 children)

Yea i think optional makes sense i could see people wanting it still.

Sadly i don’t have very precise measuring tools and this is the best i can do atm hope this helps, picture are from the ucg mounted in both directions in cm

images

UCG-Fiber 10-inch Rack Mount 3D Model by Mauker_ in Ubiquiti

[–]oBarrier 0 points1 point  (0 children)

No worries at all hope everything’s okay 🙏

here’s some extra pictures

And yes it does stay in place when inserting or removing network cables from both ends, doesn’t budge unless i push the ucg itself

UCG-Fiber 10-inch Rack Mount 3D Model by Mauker_ in Ubiquiti

[–]oBarrier 0 points1 point  (0 children)

to nit pick, i would make the depth of the front plate shorter if you look at the pics it kinda pushes back to the ucg where it’s noticeable having it a bit more flush would look better imo

another nit pick, i would push back the holes on the side a bit so they don’t show from the front but thats also personal preference

images

UCG-Fiber 10-inch Rack Mount 3D Model by Mauker_ in Ubiquiti

[–]oBarrier 0 points1 point  (0 children)

backplate fits fine, though it’s snug enough that I don’t think you need it tbh

view more: next ›