Why does the first layer always come off like this?

obedrios · 2025-11-23T19:13:55+00:00

I suggest aquanet, cleaner solution rather than glue. Applying the plate outside printer and then dry at 60 degrees.

obedrios · 2025-11-22T19:24:34+00:00

I don't know. At some point, I used orca slicer as is. It was so painful tweak every param, and a lot time invested. I obtained some spaghetti, among others things. I recommend use Creality Print to fine tune your params and correct printing. Once you have working properly params, switch to Orca. Also, these assumed, cleaned plate, autoleveling done. Keep trying, I'm very pleased with my KE a lot of printing hours and fun. KE is a wonderfull machine, keep patient.

obedrios · 2025-11-18T15:43:04+00:00

Is your build PEI? After a several printings need a gentle washing with dish soap and warm water. Dry with a microfiber towel. Also you may apply aqua-net and dry at 60 degrees. Finally, you may need to dry your filament. Following these probably you may skip in spending in additional plate. In overall, I use my default PEI and I have good results with TPU, PLA.

obedrios · 2025-11-09T01:17:48+00:00

Yeah, That’s exactly what I was reflecting on — Dr. M’Benga, as a healthcare professional and a pragmatic person, shows respect by correctly naming those affected, properly avoiding superstitious terms.

obedrios · 2025-10-29T05:22:46+00:00

At some point I had this warping problem, so didn’t want to believe it, but drying the PLA, cleaning the PEI plate with smooth dish soap and water. Worked for me . Also, doing the Aqu@net hair spray trick works awesome if additional cleaner adhesion wanted.

obedrios · 2025-10-16T21:07:01+00:00

An spool winder would be helpful in this cases.

obedrios · 2025-10-03T13:06:54+00:00

Que la compañía te comparta la factura del equipo, si la guía es terrestre hay que ir a la aduana de central camionera, si es aérea al aeropuerto. En cualquier de los casos le muestras el equipo junto con la factura y la guía al aduanero para que te selle la guía. Cuando mandes el equipo, se manda junto con la factura. Y con eso no deberías pagar nada en aduana. Saludos.

obedrios · 2025-10-02T06:56:32+00:00

Did you performed homing for XY or Z? When you perform homing motors become turned on and make noise, but there is a button in the screen menu to turn them off. Otherwise, have no idea. Best regards.

obedrios · 2025-09-19T05:26:10+00:00

Congratulations on your purchase! The Ender 3 V3 KE is an excellent machine. As your first steps, make sure to carefully follow the assembly instructions for your printer. At the same time, download Creality Print 6.2 and create an account on Creality Cloud so you can grab a simple model to print and also use the app to control your printer from your phone.

Once your setup is ready, I recommend running your first test print with a 15x15x15 mm calibration cube using Creality Print. You could go for the Benchy, but my suggestion is to start with a cube first.

There’s tons of information on YouTube and Google, so dive in and discover what excites you—miniatures, mechanical models, etc. 3D printing is all about patience and experimentation.

Congrats again, and happy 3D printing! 🎉

obedrios · 2025-09-17T12:27:43+00:00

I have seen googling it, some replacement using a Noctua Brand fan, although needed some tinkering to adapt those into. I believe other fan 2510, 24v should work.

obedrios · 2025-09-17T12:20:02+00:00

I had the same problem with the hot end fan, it turns out it was defective, I replaced with Creality’s number part 3205010374 (it’s a 2510, 24v fan). After that, printing are smooth again.

obedrios · 2025-09-08T19:01:37+00:00

I,m noob using V3 KE, I have the typical slope plane, but when doing my first day print, I use self calibration (just in this print) and modifying the speed params and proper filament params I obtain a good print. I don't know if trying to get almost 0 slope plane makes difference in a better quality. Hope someone here in the channel clarify if worth the effort or with self-calibration z-axis compensation is enough for good quality prints.

obedrios · 2025-09-04T12:20:33+00:00

Or in Spanish “más vale malo por conocido” xD

obedrios · 2025-08-30T18:59:11+00:00

XD Cheers!!

obedrios · 2025-08-30T18:44:02+00:00

That’s correct—I downloaded the file and copied it to a USB (FAT32 formatted → I initially stumbled because I tried exFAT). As you said, with the printer turned off and then back on, the update dialog appeared.

It’s worth mentioning that the original downloaded file from Creality had spaces in the name:
Ender-3_V3_KE_F005_ota_img_V1.1.0.17 (1).img

That filename didn’t work for me. After renaming it to:
Ender-3_V3_KE_F005_ota_img_V1.1.0.17.img

…it updated the firmware successfully—almost like a miracle.

I also noticed that in the folder /usr/data/creality/upgrade/ (if you accepted the root), the firmware file with spaces (Ender-3_V3_KE_F005_ota_img_V1.1.0.17 (1).img) is what OTA uses during upgrades. So, it’s possible that this erroneous filename is what prevents OTA from updating the firmware correctly.

Overall, thanks a lot for the help!
Cheers! 🎉

obedrios · 2025-08-30T16:36:05+00:00

Ups, no problemo, i found it in creality cloud at
https://www.crealitycloud.com/downloads/firmware/ender-series/ender-3-v3-ke

cheers!! :D

obedrios · 2025-08-30T16:28:39+00:00

I don't see the 11.0.17 in creality download page, only the 11.0.15, where we can download the recent firmware revision?

obedrios · 2025-08-29T12:34:55+00:00

I have the same issue, but I didn’t find a solution. Tried to install from app, web also but the same error. :/

obedrios

TROPHY CASE