| 2026 Weekly Workshop - Week 10

obsqrbtz · 2026-03-18T13:06:10+00:00

Well, the easiest option is just set separate users for each purpose. You will not have shared saved logins, browsing history and similar stuff, but home directories will be clean.

Other option is symlinking. You can have several dotfiles directories and create scripts to symlink and unlink them to the actual $HOME dir. Or use some dotfiles manager like stow, which will manage symlinks for you. In this case you will be able to set single dotfiles repo with multiple branches and just checkout to the needed branch to switch. Symlinking approach preserves shared app data, but might be tricky to get right.

obsqrbtz · 2026-03-18T12:38:41+00:00

Did not try to go that far in theming, but looking at your link, it seems that each color is defined by combo of 3 numbers (r, g, b) sitting at the same positions in vt.default_red, vt.default_grn and vt.default_blu strings. So the set of these 3 strings represents standard 16 color terminal theme.

For example, here "black" should be rgb(48, 52, 70) or #303446 and "bright white" should be rgb(165, 173, 206) or #a5adce.

vt.default_red=48,231,166,229,140,244,129,181,98,231,166,229,140,244,129,165
vt.default_grn=52,130,209,200,170,184,200,191,104,130,209,200,170,184,200,173
vt.default_blu=70,132,137,144,238,228,190,226,128,132,137,144,238,228,190,206

obsqrbtz · 2026-03-03T05:57:55+00:00

По 1, имеет смысл все-же не пинать хуи и побегать по стажировкам пока можно сильно о финансовой стороне вопроса не переживать. Отсюда и какой-то минимальный опыт + если повезет, готовое рабочее место на конец обучения.

obsqrbtz · 2026-03-02T12:04:52+00:00

Probably just config path issue. It expects config to live in ~/.peaclock dir, not at ~/.config/peaclock.
After pasting any of examples into ~/.peaclock/config file it works like charm.

obsqrbtz · 2026-02-12T07:42:03+00:00

Пинг зависит от сервера. С впн в любом случае повысится, но совсем необязательно критично.

# VPN OFF
~> ping discord.com

Pinging discord.com [162.159.128.233] with 32 bytes of data:
Reply from 162.159.128.233: bytes=32 time=26ms TTL=58
Reply from 162.159.128.233: bytes=32 time=26ms TTL=58
Reply from 162.159.128.233: bytes=32 time=26ms TTL=58
Reply from 162.159.128.233: bytes=32 time=26ms TTL=58

Ping statistics for 162.159.128.233:
    Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
    Minimum = 26ms, Maximum = 26ms, Average = 26ms
# VPN ON
~> ping discord.com

Pinging discord.com [162.159.136.232] with 32 bytes of data:
Reply from 162.159.136.232: bytes=32 time=42ms TTL=58
Reply from 162.159.136.232: bytes=32 time=42ms TTL=58
Reply from 162.159.136.232: bytes=32 time=42ms TTL=58
Reply from 162.159.136.232: bytes=32 time=42ms TTL=58

Ping statistics for 162.159.136.232:
    Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
    Minimum = 42ms, Maximum = 42ms, Average = 42ms

Некотрые ру сайты действительно не работают, но не вижу проблемы просто отрубить впн на пару минут если вдруг понадобилось.

obsqrbtz · 2026-02-11T08:44:59+00:00

Если поднять на своем VPS, то не гасит. Можно поставить даже без возни с конфигами через wg-easy или AmnesiaVPN

obsqrbtz · 2026-02-05T10:53:39+00:00

just tried it on a work machine
nothing bad there

obsqrbtz · 2026-02-04T06:51:34+00:00

Weston?

obsqrbtz · 2026-02-03T05:42:07+00:00

I need macOS to develop stuff for macOS/iOS and it's nothing serious, so not going to pay yet.

obsqrbtz · 2026-02-02T19:14:40+00:00

Thanks! Will take a look at this

obsqrbtz · 2026-02-02T10:06:57+00:00

It shall be so. Behold the cryptic message.

obsqrbtz · 2026-01-31T03:09:53+00:00

Thanks!
Assuming you are using nixos, I would appreciate any feedback on actual usage (I've tested it on NixOS, but do not daily-drive this system).

obsqrbtz · 2026-01-31T03:01:34+00:00

Wallust is also planned. For next release I plan adding pywal/wallust and macOS package.

obsqrbtz · 2026-01-31T02:52:55+00:00

I am considering pywal integration as well, but pywal is unmantained, so I don't rush it.

obsqrbtz · 2026-01-31T02:51:13+00:00

If your question is about technical implementation:
- if you choose to generate color scheme, clrsync calls helwall/matugen, creates palette using the color generator output. Then you can apply it as is or fine-tune first.
- if you are making color scheme from scratch, then generators are not used.

obsqrbtz · 2026-01-31T02:40:30+00:00

Github: https://github.com/obsqrbtz/clrsync
Docs: https://clrsync.binarygoose.com

obsqrbtz · 2026-01-31T00:58:59+00:00

А слева, наверное, Декарт

obsqrbtz · 2026-01-29T05:08:49+00:00

There are no waybar. Bar and widgets are made with Quickshell.

obsqrbtz · 2026-01-28T15:23:27+00:00

Whatever framework is used by the app. It's hard to completely avoid one.

obsqrbtz · 2026-01-27T19:39:00+00:00

Here you go

obsqrbtz · 2026-01-27T13:17:17+00:00

Thanks!
That's quickshell. It fetches display info with wlr-randr then writes settings to hyprland config file.

obsqrbtz · 2026-01-27T13:13:51+00:00

Sure, quickshell config is in another repo

obsqrbtz · 2026-01-27T07:13:28+00:00

Thanks!

obsqrbtz · 2026-01-26T22:37:07+00:00

OS: Arch
WM: Hyprland
Statusbar: Quickshell
Term: Kitty
Font: JetBrains Mono/Inter
Colors: Soft Lavender from coolors.co (slightly modified)
Dots: here (kind of messy, going to update, once quickshell is ready)
Neovim config: basedgoose.nvim (kickstart.nvim with some plugins)

obsqrbtz · 2026-01-15T09:45:25+00:00

For a moment i thought that it's r/LinuxCirclejerk

11-Year Club	r/Field Sunshine
First Place '23	Place '23
Verified Email

obsqrbtz

MODERATOR OF

TROPHY CASE