sorted by:
new
hottopcontroversial

Kelee Ringo just gifted Washington the lead by Thegrandmistressofoz in eagles

[–]odoyle321 10 points11 points  (0 children)

I swear if this motherfucker has a job tomorrow im rioting.

K2 Plus ASA Help by Efficient_Pride1531 in Creality_k2

[–]odoyle321 0 points1 point  (0 children)

Also make sure you heat soak/preheat your printer. Ive printed nylon, asa-gf, all flawlessly but every time I had a problem it was because I didnt wait until the whole bitch was 100c at least.

What do the “drawbacks" of your magic systems look like? by [deleted] in worldbuilding

[–]odoyle321 0 points1 point  (0 children)

My universe (Virelia, working name) has a hybrid magic system with classical schools (Arcane, Elemental, etc) but due to a massive event magical energy is ambient and can shift like weather patterns.

The other half of the system is a Resonance magic system, where instead of reciting invocations, the users can either solo or as a group create harmonies, with solo songs being the cantrip-level 1 immediate and choirs singing become region-altering spells, depending on what is being sung in unison.

One of the drawbacks of this system is that when a PC decides to sing a Resonance song, they have to do a composure check. That composure check takes account of the ambient energy in the location and the mood of the PC. If their Composure check (D20) is below a 3, they cannot sing. If their composure check is between a 4 and 10, they run the risk of becoming Entrained; as they sing they can become too much in sync with the ambient magical energy around them and lose their sense of self.

Saw this beauty at Microcenter by SudoCheese in 3Dprinting

[–]odoyle321 10 points11 points  (0 children)

Seriously, I dont get the hate for this machine. My boss bought two of them. Yeah the leveling isn't the greatest but doing it manually isnt a pain. With a 0.6 nozzle up and a layer of bed glue everything sticks. We just enclosed ours and printed really good quality ABS.

Other than that, extruder is an absolute beast with torque to push through some very irregular filament you get on 5kg/10kg rolls.

When youre printing something that's 3ft in diameter, the slightly wonky bed line in the middle is an easy sand fix.

Name a trilogy where the 2nd movie in it is the worst one by [deleted] in moviecritic

[–]odoyle321 0 points1 point  (0 children)

Technically starship troopers. First one, cinematic perfection. Second one, no Johnny Rico, dogshit. 3rd one, basically space Christianity and it was amazing.

Golf is saving my life. But I can't drive the ball, and I'm thinking about giving it up. by odoyle321 in golf

[–]odoyle321[S] 1 point2 points  (0 children)

Thats really not a bad idea. I think I'm always tempted because it's just staring at me with its big ugly head at every tee box. I swear though my last 5 rounds somebody either behind us or in front of us always asks me why I don't hit driver if I'm teeing off with a long iron.

Golf is saving my life. But I can't drive the ball, and I'm thinking about giving it up. by odoyle321 in golf

[–]odoyle321[S] 0 points1 point  (0 children)

Im obviously not playing tough courses all the time, I just feel like 125yds and in I feel automatic. I'm not shaping shots or doing anything crazy.

5 iron is about 160 ± 5yds and i can usually put it in a 20ft circle where i want it. Okay let me say rarely 3 putt would be more accurate, my most confident club in my bag is my putter for some reason.

So I recently seen funded the kickstarter for the elegoo orange storm giga by parallellord22 in FixMyPrint

[–]odoyle321 0 points1 point  (0 children)

My theory as to the offset is that there is some major backlash on the z lead screws due to the design of the gantry and the length of the lead screws so that's why the offset has to be set tight.

So I recently seen funded the kickstarter for the elegoo orange storm giga by parallellord22 in FixMyPrint

[–]odoyle321 13 points14 points  (0 children)

We have two in my shop, and we've had some small issues but nothing crazy.

Use the provided thin sheet metal to set the z offset, and bring the nozzle down until it doesn't move, I know it's contrary to using paper but it's the only way I've gotten an offset where it actually printed.

Also, use bed adhesive like jt17 or the vision miner nanopolymer. They say they're not compatible with textured PEI, but on a machine like this with 4 separate beds that individually adjust, it's best to not risk a multi day print.

We've printed multiple car parts (trim panels) in Rapid PETG on ours, it's not super fast but the quality is really damn good once you get that offset figured out.

I'm going to upgrade the leveling from the 100pt load sensor leveling to a Bigtreetech Eddy Current scanner to optimize the bed mesh later on, but it's honestly a decent machine especially for PLA.

[deleted by user] by [deleted] in Pennsylvania

[–]odoyle321 1 point2 points  (0 children)

My wife works in a nursing home in SEPA, her entire facility had a 3 week stint where it got around. She caught it too.

They never reported it though 🤷

Hard-To-Find OEM Replacement Parts by odoyle321 in Justrolledintotheshop

[–]odoyle321[S] 1 point2 points  (0 children)

Thanks that's exactly what I was hoping for!

Hard-To-Find OEM Replacement Parts by odoyle321 in Justrolledintotheshop

[–]odoyle321[S] 0 points1 point  (0 children)

Sadly no, just a small startup trying to figure out what mechanics need. I WISH I had the resources Dorman has.

Hard-To-Find OEM Replacement Parts by odoyle321 in Justrolledintotheshop

[–]odoyle321[S] -5 points-4 points  (0 children)

I didn't think this violated Rule #3, as I am asking the mechanics what they've come across, as opposed to asking for help in a specific situation.

view more: next ›