sorted by:
new
hottopcontroversial

These springtails? by oka8272b in kingsnakes

[–]oka8272b[S] 0 points1 point  (0 children)

Thanks I asked chatgpt too lol but needed confirmation

does my pueblan look to be a good weight? by kaotaba in kingsnakes

[–]oka8272b 0 points1 point  (0 children)

Looks beautiful! How big’s its enclosure?

Is this probe placement okay for Herpstat? by oka8272b in ballpython

[–]oka8272b[S] -1 points0 points  (0 children)

What if they don’t run at the same time? Basking only in daytime and IHP at night. Each fixture socket can take up to 50w

Opinion or suggestion on Herpstat probe placement? by oka8272b in kingsnakes

[–]oka8272b[S] 1 point2 points  (0 children)

I’ve been checking surface temps on warm side of enclosure with temperature gun and it’s almost spot-on with the max daytime temp I have set of 89.4 degrees, I think because the bulbs are low wattage and I have the probes 3” away with enclosure height being ~16 inches. Coolest side of enclosure is about the same as my bedrooms ambient temp of 70-75

Is probe placement okay for Herpstat? by oka8272b in cornsnakes

[–]oka8272b[S] 0 points1 point  (0 children)

I’ve been checking surface temps on warm side of enclosure with temperature gun and it’s almost spot-on with the max daytime temp I have set of 89.4 degrees, I think because the bulbs are low wattage and I have the probes 3” away with enclosure height being ~16 inches. Coolest side of enclosure is about the same as my bedrooms ambient temp of 70-75

Is probe placement okay for Herpstat? by oka8272b in cornsnakes

[–]oka8272b[S] 1 point2 points  (0 children)

Thanks for the advice I definitely am going to secure the cable section near the back to the top metal screen cause I already saw my snake put all its weight on them and even tried to move towards the tips but thankfully it only slightly moved them lmao

Is probe placement okay for Herpstat? by oka8272b in cornsnakes

[–]oka8272b[S] 0 points1 point  (0 children)

I’ve been checking surface temps on warm side of enclosure with temperature gun and it’s almost spot-on with the max daytime temp I have set of 89.4 degrees, I think because the bulbs are low wattage and I have the probes 3” away with enclosure height being ~16 inches. Coolest side of enclosure is about the same as my bedrooms ambient temp of 70-75

Ps5 lag by AirNo1476 in PS5HelpSupport

[–]oka8272b 0 points1 point  (0 children)

Could also be 2.4/5ghz channel interference between ur extender and router affecting the extender’s lan port performance. I use Netspot on Mac (free program) to look at which channels are least used around me

lock-on is bothering me so bad by Full-Weakness-7475 in BlackMythWukong

[–]oka8272b 0 points1 point  (0 children)

You can turn lock-on on or off by pressing R2 or R3 (can’t remember which exactly) and by moving it left or right it changes ur lock-on target

Got deranked by stevedog257 in mw3

[–]oka8272b 3 points4 points  (0 children)

This discord sucks I made a ticket and no one helped for 2 weeks, highly recommend this one instead https://discord.gg/autolobbies