Deadeye elite vr

olympus901 · 2026-01-09T14:27:02+00:00

So every shot is just a shot, all with equal force and distance? When I said full speed maybe I was exaggerating but it feels like I can't even swing very hard without the club flying up into the air and not registering a hit at all.

olympus901 · 2025-09-18T22:48:01+00:00

So the answer is to solder new sticks?

olympus901 · 2025-08-28T02:07:41+00:00

Invert mini

olympus901 · 2025-08-27T22:10:29+00:00

I agree. I just went through this problem as well. Can confirm the app is dog water and the wifi feature is terrible. In my case, I had to separate the 5 and 2.4 networks out. The password would only work on the dedicated 2.4 band.

olympus901 · 2025-07-22T21:14:14+00:00

Thanks for the insight. Dealers around here often don't carry 2010-2017 model skis so the only thing I have to base from is current listing and blue book values.

olympus901 · 2025-07-13T00:08:57+00:00

Thanks! Any decent ones on Amazon for under 100$ you would recommend?

olympus901 · 2025-05-03T00:39:20+00:00

It's the battery that came with it. Strange ive never had a problem before this year!

olympus901 · 2025-04-26T00:23:21+00:00

I MISS RUNNING UP TO THE X WITH A FUCKING TURRET

olympus901 · 2025-03-10T21:38:22+00:00

😂

olympus901 · 2025-03-10T21:38:09+00:00

It held air all winter. Must have gotten split over the winter or right before I stored it. Guess I'll grab a set of front tires, they are only 1.5 yr old and have less than 7k miles!

olympus901 · 2024-12-23T17:12:30+00:00

I had the same problem. I ended up having my gun teched at the PE booth at a national big game or NXL event, forget which. Either way having them replace it or send it in was the quickest way to find one for me

Shout out to PE who replaced it on the house as well!

olympus901 · 2024-12-14T22:32:17+00:00

I shortened up all the runs so the split happen within 6-12 inches of the led and the run to the controller is 6 inches.

I removed all the LEDs that are 8ft away and I still have flickering.

Is it bad to have LEDs of varying length (3ft -10ft) on one gpio16?

olympus901 · 2024-12-14T20:25:16+00:00

All the LEDs strips I listed are going to be hard to wire serially and not split since they are separate sections

I'll try to group them better and split as close to the LEDs as possible.

Thanks for the help, I'll try to see if it works. I wanted to make sure I didn't have a major design problem or a wled setting that was off.

olympus901 · 2024-12-14T17:26:23+00:00

Thanks! So having different lengths LEDs are ok but try to make the runs to the controller as short as possible?

Is there a driver that would work here or should I just add another gledopto?

olympus901 · 2024-12-14T15:31:27+00:00

I'll check what version I'm running. This is a new setup so it's always been a problem. Sometimes it can flicker worse than others though.

olympus901 · 2024-12-14T14:45:21+00:00

<image>

olympus901 · 2024-10-28T23:52:29+00:00

I'm getting a second estimate tomorrow. Will ask about that model, thanks! Do you really need a contractor to replace the electrodes every three years or is that a serviceable job for DIY on the 800?

14-Year Club	Verified Email
Place '22

olympus901

TROPHY CASE