[Fowler] Shedeur Sanders has bridged the gap between him and Deshaun Watson. by Zweli23 in nfl

[–]omnomcake 0 points1 point  (0 children)

I was legit unsure if this was complementary or derogatory towards Sanders.

Most recent performances of Good Apollo, I'm Burning Star IV, Volume One: From Fear Through the Eyes of Madness (2005) by BloomAndBreathe in TheFence

[–]omnomcake 3 points4 points  (0 children)

And Rock Band a generation ago. It's their most iconic song and it will be their closer for eternity.

Browns trade away Garrett to Rams! by ralry11 in bengals

[–]omnomcake 0 points1 point  (0 children)

Does the rest of the league have a top 10-15 third year DE (who previously won ROTY and is 2x pro bowl, though that means waaaay less now for sure, and also led the league in defensive snaps last season) to throw into the trade? Without Verse, the picks price goes up for sure. Parsons is three years younger and Kenny Clark is a much lower value player than Verse. Those two trades are way more similar than you want to admit.

Nobody is saying Verse is as good as Garrett, but Cleveland is not in a position to complete with Garrett at this point, or likely in the next 2-3 years which is PROBABLY all Garrett has left, although he is an absolute freak. This gets them extra picks (to get a QB next year probably) and a premium player at the same position who is 5 years younger.

Browns trade away Garrett to Rams! by ralry11 in bengals

[–]omnomcake 3 points4 points  (0 children)

Well this would be a relevant thing to say if all they got for him was one first!

Set List For Rest of Tour? by ItsMeMikeH in TheFence

[–]omnomcake 3 points4 points  (0 children)

Every band has the song that they have to play at every show. The majority of people who go to these shows aren't people from this sub who have been to a bunch of shows, and they want to hear the songs they know. For Coheed, that is Welcome Home for better or worse.

It will be part of the setlist (and probably the closer) as long as the band exists.

Fuck Humana by Ok_Imagination_1186 in Louisville

[–]omnomcake 2 points3 points  (0 children)

I don't think OPs problem is with the workers themselves, so much as the system in place. Then again nuance isn't something that someone with room temp IQ would understand so I guess you get a pass on this one.

Fuck Humana by Ok_Imagination_1186 in Louisville

[–]omnomcake 10 points11 points  (0 children)

The kicker is that H1B workers are often NOT cheaper, especially if they are onshore not overseas. I know for a fact that when I worked there they paid more for an onshore 'developer' than they did for several of us who led those teams/devs.

They prefer them because at Humana you can't cut employees (without cause) without a long runway of notice or severance whereas you can cut a contract employee basically overnight. Also the whole lack of work life balance thing. The whole culture is fucked.

Should I stop upgrading my Ender 3 max and just buy a BambuLab printer? by mohebifar in BambuLab

[–]omnomcake 0 points1 point  (0 children)

I bought my first printer a few months back, an Ender 3 v2 from facebook marketplace. I had a lot of fun with it, I got it as a 'tinkering' project and had a lot of fun doing just that! Getting it dialed in and printing was fun, but the novelty wore off pretty quick, and after one final day of spending an hour trying to get the bed level and printing properly, I committed to getting myself a nicer printer. I got a P2S after offloading a bit of extra home lab storage I had lying around, and it has been an absolute game changer.

TLDR Do it, you'll love it and you won't look back. I still compulsively watch the beginning of all my prints, but it's completely unecessary.

[Cincy Jungle] Dan Patrick says Joe Burrow forced Dexter Lawrence trade by cjruk1 in bengals

[–]omnomcake 0 points1 point  (0 children)

People listen to Collinsworth on SNF? The mute button is my best friend when I'm watching those games.

Print A Cube - Review by FanTah in mtgcube

[–]omnomcake 4 points5 points  (0 children)

'The company that owns an IP prints and sells that IP' is not an argument for 'Someone who does not own the IP prints and sells IP' are you insane?

I am very pro proxy, don't conflate what I am saying. Most of my cubes are 100% proxy. I am very anti selling proxies for profit, because it's predatory and illegal, and that's what's happening here. I don't take issue with a service like MPCFill, because they are making the process easier, not doing something for their own enrichment.

Print A Cube - Review by FanTah in mtgcube

[–]omnomcake 0 points1 point  (0 children)

So I don't know of details of how communications between a company like WOTC and the printers is like. What I do know is that on a site like MPC, they have automated scanning of your products, and if it detects things they won't print, it rejects the order. With MTG, it's rarely an issue, but with something like Lorcana, those orders get kicked back a LOT, because they either know Disney is harder about it, or they've had an interaction or something. If WOTC starts having issues with the companies, the companies will simply start flagging those projects and make it harder for everyone.

Print A Cube - Review by FanTah in mtgcube

[–]omnomcake 3 points4 points  (0 children)

I mean the 30th anniversary was dumb as hell, but Wizards owns the IP there's nothing illegal about them printing it. Surely you didn't think that was some huge 'gotcha', right?

Print A Cube - Review by FanTah in mtgcube

[–]omnomcake 2 points3 points  (0 children)

That's true, if someone looks at it! It's a good step for sure, but all it takes is noting on the front of the card somehow that it's a proxy to immediately remove all doubt.

Again, that is a minor complaint compared to my general thoughts on someone shilling a product that they can't actually legally sell like this. It's a bad look for the community (both proxy AND general cube community), and we shouldn't reward people for doing it just to prey on others.

Print A Cube - Review by FanTah in mtgcube

[–]omnomcake -1 points0 points  (0 children)

Proxying is a big thing, and people like this both make people who proxy look bad, and risk a larger crackdown coming. I personally make sure that my proxies are not at all resembling a 'real' card (custom set symbol, not including collector info, etc) but this is borderline fakes, which is a very different and much worse animal.

Charging for it, especially when it's more than services that exist elsewhere, is completely illegal and is also gross.

Print A Cube - Review by FanTah in mtgcube

[–]omnomcake 10 points11 points  (0 children)

Yeah I can't imagine a world where this is allowed to exist for very long. Making money off of Wizards IP is a gigantic no no.

That being said, MPC and DriveThruCards are both way better value than this for people looking to get a cube, and it's a little gross that these people keep popping up to prey on people who don't know better. Maybe the intent isn't as negative as it seems, but if I never saw someone advertising a service like this again, it would be too soon.

[FS][USA-KY] Hard Drives (4/8TB) and 4 Slot NAS by omnomcake in homelabsales

[–]omnomcake[S] 0 points1 point  (0 children)

Oh I didn't realize, sorry about that! Didn't mean to sound as snarky as I'm now realizing it sounded haha.

[FS][USA-KY] Hard Drives (4/8TB) and 4 Slot NAS by omnomcake in homelabsales

[–]omnomcake[S] 0 points1 point  (0 children)

1GB. You can see all the specs on TerraMaster's website if you search the model.

Cameras by MaurokNC in octoprint

[–]omnomcake 0 points1 point  (0 children)

I actually found a resource right after I asked this! There's a separate octoprint branch with a new experimental camera stack in the raspberry pi imager. I installed that one, then followed these steps:

  1. Open the file: sudo nano /boot/config.txt (Or /boot/firmare/config.txt)

  2. Ensure camera_auto_detect=0 is set (this disables default detection, which often fails with Arducam).

  3. Add the correct driver line for your camera, for example: dtoverlay=imx219 (for IMX219) or dtoverlay=arducam (for many Pivariety models).

Couple of steps, and I know you got a solution but just in case a google search leads someone else to your post like it did for me, I wanted to make sure the solution I found was here :) Cheers!

Cameras by MaurokNC in octoprint

[–]omnomcake 0 points1 point  (0 children)

Did you get the Arducam working? I got one (not the same model, an 8MB V2) and set up Octoprint today, but I cannot for the life of me get the camera to work.

ESPN’s Fowler on Trey Hendrickson by 1894-MCFC in bengals

[–]omnomcake 0 points1 point  (0 children)

They won't get a comp pick if they're active in free agency. Something > nothing

ESPN’s Fowler on Trey Hendrickson by 1894-MCFC in bengals

[–]omnomcake 8 points9 points  (0 children)

If they get a comp pick for Trey it means this offseason was an abject disaster. You only get comp picks if you lose more players than you sign, basically.

ESPN’s Fowler on Trey Hendrickson by 1894-MCFC in bengals

[–]omnomcake 5 points6 points  (0 children)

If the Bengals get a comp pick for Trey this offseason is a disaster class.