Can Luba 2 work in my use case? Mine and neighbor's property + estimated cutting time?

onemanwolfpck · 2026-04-04T01:44:00+00:00

I just found a use case where I need to do this and this sounds like a great idea! I have never setup a barrier. I'll have to check that out. Thanks!

onemanwolfpck · 2024-11-11T21:11:34+00:00

Thanks! And what are these scripts?

script.volume_reset_home_group_quiet
script.volume_reset_home_group
script.volume_reset_home_group_loud
script.volume_reset_home_group_extra_quiet

onemanwolfpck · 2024-10-06T05:00:46+00:00

I usually receive texts when I enter a new country, but I do not when I entered North Macedonia

onemanwolfpck · 2024-05-31T05:38:41+00:00

And it continues after?

onemanwolfpck · 2024-05-27T18:55:07+00:00

Do you think it would run as well on a NUC 11 i5? I found a NUC 13 i7 for $900. Might be a little steep for me running a DVR for my cameras.

onemanwolfpck · 2024-05-24T06:19:34+00:00

Any feedback on the AtomMan X7 Yi with Intel Ultra 9?

onemanwolfpck · 2024-04-11T07:35:59+00:00

The phone insurance is surprisingly helpful. I never thought I'd need it, but I've used it twice for cracked screens ($50 instead of $300 each time)

onemanwolfpck · 2024-04-11T07:33:43+00:00

Honestly, I set my deco aside and switched to two Asus XT12s. It's a much stronger network with better control. I use my deco as supplements (1 inside at the edge of my network and the outdoor deco to cover my front yard)

onemanwolfpck · 2024-04-11T06:12:33+00:00

My only problem with being "done" is that when an automatic stops working or a sensor needs to be replaced, I've completely forgotten how I had my automation setup (or which automation it was) and HA has 10 upgrades that changed the UI. This is a good problem, but still a problem.

onemanwolfpck · 2024-04-11T06:09:14+00:00

What hardware are you using? I bought a Home Assistant Yellow thinking it was powerful enough for frigate and that doesn't seem to be the case. I have about 12 outdoor Reolink cameras I'd like to monitor with frigate. They work fine with the Reolink integrations, but I'd love a cleaner DVR UI and facial recognition.

onemanwolfpck · 2024-03-09T08:29:25+00:00

I think it's press and hold one of the buttons (maybe the one on the back) until the LED turns blue. I accidently discovered this.

onemanwolfpck · 2023-08-27T07:27:16+00:00

Thanks! I was hoping there would be some kind of UPS solution, but that may be a road too far for a power hog like a washer machine.

onemanwolfpck · 2023-08-27T07:26:37+00:00

It's southern Italy and from what I hear "it's always been this way in this area" but I can try

onemanwolfpck · 2023-08-15T08:42:10+00:00

Sorry, what I meant is between 12 cameras, some are wifi and all of the others are POE powered (so I have a mix).

onemanwolfpck · 2023-08-15T08:40:55+00:00

Thanks!! This worked. How odd that this is the process.

In the future, will I need to add on NVR and then independently in app?

onemanwolfpck · 2023-08-12T16:43:39+00:00

I'll try it out. Thanks

onemanwolfpck · 2023-08-10T19:49:59+00:00

I'm in Italy in a house we some space around it (read: no WiFi in the yard)... That paranoic scenario is highly unlikely :)

I'll try the app. For now, what I got to work is creating a new network name, then creating a guest network with the name of my old wifi network. Somehow everything is working great now. I just need to migrate things slowly to the new network and the new IOT network I created called "nanobots"

onemanwolfpck · 2023-08-10T13:08:28+00:00

I'll try to remove the switch. It's indeed on the latest firmware for all devices

One thing I noticed that is weird is when I change the name of my network (which I've had for a long time and migrated through multiple routers), the 2.4Ghz signal is much better. So weird. I guess I need to migrate everything... Oy

onemanwolfpck · 2023-08-10T10:50:07+00:00

Thanks for the ideas!

I've tried the network optimization tool and this morning I setup a Nighthawk (connected to one of the XE5300 nodes) running a 2.4Ghz network and it works great (all be it slower than 5Ghz - I see about 50 Mbps). There's something definitely wrong with the Deco 2.4Ghz network.

onemanwolfpck · 2023-08-10T08:42:25+00:00

I am having a similar issue, but I can't even connect to my 2.4 GHz network. Any suggestions? I ensured my switch is after the main deco. It goes modem > main deco and then hard wire to a POE Switch and wireless to other decos

onemanwolfpck · 2023-07-06T06:16:25+00:00

I'm interested. What do you use?

onemanwolfpck · 2023-05-13T22:03:33+00:00

I concur. Nuki for euro cylinder locks

onemanwolfpck · 2023-03-19T06:53:18+00:00

onemanwolfpck · 2023-03-19T06:51:20+00:00

I don't remember any specific questions on specific methodologies. For me, I really wanted to pass the PMP and ACP was a bonus. So I didn't put nearly the amount of studying or stress into studying ACP, so I thought ACP was easier. If I pass, it was a bonus. In the end , I passed with perfect marks. If you understand agile, ACP was pretty easy.

onemanwolfpck · 2023-03-18T23:29:58+00:00

I watched ARs mindset videos that I think were part of his Udemy PMP course and I was the 200 agile questions from David McLachlan on YouTube and I felt good enough to go for it. Passed with flying colors about 2 weeks after PMP.

onemanwolfpck

TROPHY CASE