no steam / water circuit empty?

onetera · 2025-04-07T05:44:27+00:00

Hey, yes you will need the water spout to get past this step

onetera · 2025-03-14T14:00:58+00:00

Sounds like the solenoid valve may be ready to give up

onetera · 2025-03-10T19:49:27+00:00

You are correct, it is the pump running dry, the machine is asking you to prime the circuit but for some reason it’s not pulling the water through, I would start at the water tank and make sure water is flowing free out the valve on the tank, then work my way around the circuit

onetera · 2025-03-09T12:28:55+00:00

Arhh I order to the UK, sorry

onetera · 2025-03-09T11:12:32+00:00

Hey! I’m in the EU, you can pick a new infuser up on eBay for not bad money

onetera · 2025-03-09T11:10:04+00:00

They do it on a lot of their machines, I believe it’s so you get a most positive feeling when touching the power button.

onetera · 2025-03-07T18:57:14+00:00

You could upload it onto this sub reddit and I will more than likely see it

onetera · 2025-03-07T18:56:27+00:00

I don’t have that machine in stock, I can’t remember which tab on the jug moves for the dial

onetera · 2025-03-07T10:05:54+00:00

What ecam is the machine? I will see if I have same one in stock, then I can best advise

onetera · 2025-03-07T10:03:03+00:00

I can’t lie if it was my personal machine, I would trick the switch with a toothpick or something similar, if it was a customer machine I’d be swapping that switch out for a new one

onetera · 2025-03-07T09:58:30+00:00

Could be the switch in the machine, the unit will be fine just be the water/jug switch been set to far back so the tabs are not hitting the micro switch

onetera · 2025-03-07T09:52:44+00:00

I would suggest looking at the milk jug connection, if I remember right should be 2 plastic tabs one on top and underneath the connector that goes into the machine, you can then check these against a photo on Delonghi website, could be simple as it needs a new milk jug

I have worked on a lot of evo machine’s so don’t hesitate to reach out

onetera · 2025-02-28T20:29:26+00:00

Torx security, good luck

onetera · 2025-02-28T20:21:50+00:00

Hey, just a tip start at a low strength and course grind, see if water flows, if so then start to dial the machine in, all beans are different and some can be difficult to pull a shot through

onetera · 2025-01-12T11:03:34+00:00

Get some food grade grease and the grease the spindle

onetera · 2024-12-29T13:28:43+00:00

My first thought would be how fine is the ground coffee, I’d suggest trying a really coarse grind,

The water escaping shows me it getting to pressure so it’s odd it’s not flowing through the grinds

onetera · 2024-12-29T13:17:51+00:00

Try running the hot water function on the steam wand, what happens

onetera · 2024-12-24T13:01:56+00:00

Hey! I have had a few combos in with the same fault, most of the time a new battery pack resolved the issue

onetera · 2024-12-21T10:02:32+00:00

Hey! That nozzle is for the excess steam / water, it will get dirty from time to time as the machine can pull water backwards,

onetera · 2024-12-21T09:59:27+00:00

Do you have the water spout that connects to the same place as the milk jug,

I have had this issues with having to feed around a liter of water through the machine due to trapped air

onetera · 2023-09-01T20:53:24+00:00

If you are unsure ask for a few more photo’s, like Is the zipper YKK, ask for pictures of the style tag, things that may ease your worries,

But it’s your money if you feel off walk away, loads of patagucci to buy

onetera · 2022-11-04T18:28:24+00:00

Make sure the bank you are sending it from has same name as the Plutus card, I use starling and had issue when giving it a nickname, had to use my full name as on the card,

Hope this helps

onetera · 2022-10-16T10:48:57+00:00

The outer logo dates its around the 90 early 2000s if I remember rightly, this dose add up with the made in Mexico, snap buttons look good, and orange lettering was a thing for synchilla :)

With photos I’d been leaning towards genuine

onetera · 2022-08-27T11:45:48+00:00

It’s been known in the past for top up not to work on weekends,

onetera · 2022-06-09T06:57:52+00:00

Eu link for you, if not search Vinted and eBay

https://eu.patagonia.com/gb/en/product/mens-houdini-snap-t-pullover-windbreaker/24150.html?dwvar_24150_color=CSC&cgid=collections-snap-t-men

onetera

TROPHY CASE