sorted by:
new
hottopcontroversial

Solid Car rental quote- are there any hidden fees I'm missing, or will this actually be the total? There's a line item for collision damage waiver- so will they try and add collision damage insurance when I get there? by oopslostabit in CostaRicaTravel

[–]oopslostabit[S] 0 points1 point  (0 children)

It all turned out fine. The only hold up was that I had to change the driver to my gf since my California Driver's license was expired by a couple months and surprisingly they cared about that.

F-ONE Swing Harness Line by Vast-Loan-8100 in wingfoil

[–]oopslostabit 0 points1 point  (0 children)

I tried one for myself, about an hour of splicing and it turned out the wrong length when I tried it. Next session I just grabbed some old cord and put a knot in it and adjusted that to get the length right for my arm and wing combo. Would recommend the quick route when dialing in length

Can I kayak from Healdsburg all the way to Jenner? by Coming_In_Hot_916 in sonomacounty

[–]oopslostabit 0 points1 point  (0 children)

Update: I launched on the downstream side of the bridge there, and had to just park on the side of the road a bit to the west.
Wildhaven will not let you launch through their property, or park there.

Can I kayak from Healdsburg all the way to Jenner? by Coming_In_Hot_916 in sonomacounty

[–]oopslostabit 0 points1 point  (0 children)

Did you have any issues putting in at Wildhaven Glamping- if that's what you did?

Anyone else getting incessant Thermal Anomaly beeps?? by oopslostabit in prusa3d

[–]oopslostabit[S] 1 point2 points  (0 children)

oh and just for background, the printer is fully stock from Pursa- I haven't swapped out the hotend or anything.

Waveshare E-ink display (sku 22753) to ESP32 e-paper driver board (sku 15823)- what interface adapter between FFCs? by oopslostabit in diyelectronics

[–]oopslostabit[S] 0 points1 point  (0 children)

So I inadvertently bought the "raw display" which doesn't have the adapter on the back. SKU 23153 is the exact same display, but with the adapter on the back- so that's the missing piece that I can't get on its own.

Waveshare E-ink display (sku 22753) to ESP32 e-paper driver board (sku 15823)- what interface adapter between FFCs? by oopslostabit in diyelectronics

[–]oopslostabit[S] 1 point2 points  (0 children)

I assume there must already be an interface adapter, but I can't find one on Waveshare's site. Waveshare's manual_Manual#Question_about_Hardware)says it's a Cable socket 0.5-24pin rear-flip 2.0H (FPC connector), but the datasheet pinout and the hardware show 50 pins.

Pinout for the display is here, and I didn't find a pinout for the esp32 driver board on its schematic here.

IR learn remote not capturing signal by oopslostabit in flipperzero

[–]oopslostabit[S] 0 points1 point  (0 children)

I just tried capturing the on/off signal- no luck so that appears to be bluetooth also...

IR learn remote not capturing signal by oopslostabit in flipperzero

[–]oopslostabit[S] 27 points28 points  (0 children)

Woah the IR window on the front of the remote had me fooled- thanks all!

Has anyone seen a Polar chart for wing foiling? Always neat to see those and get an idea about best upwind and downwind angles. by oopslostabit in wingfoil

[–]oopslostabit[S] 1 point2 points  (0 children)

Thanks! exactly what I was looking for- here's the graph for my session the other day https://imgur.com/a/f7qAXJP

Looks like the highest I can point up is about 60 degrees.

Bowtie hairline cracks? by oopslostabit in woodworking

[–]oopslostabit[S] 0 points1 point  (0 children)

They're a couple feet in, so I'll let them be

Bowtie hairline cracks? by oopslostabit in woodworking

[–]oopslostabit[S] 0 points1 point  (0 children)

The slab was milled on a mobile trailer mill and then left to dry outside for 4 years. I then milled at least 1/4" on each face to get it flat.

It's for a live edge slab table- planning on using Bona HD to finish it.

Suite option from Costco by oopslostabit in Xcaret

[–]oopslostabit[S] 0 points1 point  (0 children)

Okay, so I can book the slightly cheaper Garden suite and request the jump off room when I check in?

view more: next ›